|
|
|
These switch solutions feature low noise, low voltage and low on-resistance with 50 functions offered in SPST, SPDT and Mux.
|
|
|
The MT093 is fabricated in ISO-CMOS technology providing low power dissipation and high reliability. The device contains a 8x12 array of crosspoint switches along with a 7 to 96 line decoder and latch circuits. Any one of the 96 switches can be addressed by selecting the appropriate seven input bits. The selected switch can be turned on or off by applying a logical one or zero to the DATA input.
|
|
New Analog Switching ICs - Operating Range of 2.7 V to 12 V
DG9051, DG9052, DG9053
- Input voltage range of 2.7 V to 12 V for single supply implementations and ±2.7 V to ±6 V for dual-supply implementations
- Bi-directional signal, rail-to-rail analog signal handling
- Guaranteed 2-V logic high/0.8-V logic low when operating from a single 5-V or dual ±5-V power supplies
Low Rds (on) Analog Switch Family: DG271x, DG274x, and DG2799
- Designed for Direct Battery Operation
- Low level logic control - full voltage range (1.6 V to 4.3 V)
- Rds (on) as low as 0.25 Ω typ. @ 2.7 V
- Supports continuous current up to 300 mA for Reed Relay replacement
- For portable apps.: cell phones, PDAs, set-top boxes, gaming
|
|
austriamicrosystems analog switch family offers lowest on-resistance, excellent matching, fastest switching times and outstanding overall performance, making it ideal for demanding applications in the communications and industrial markets.
AS1741: Dual 0.8 Ohm SPST Switch NO
AS1742: Dual 0.8 Ohm SPST Switch NC
AS1743: Dual 0.8 Ohm SPST Switch NO/NC
AS1744: Dual 4 Ohm SPDT Switch NO/NC
AS1745: Dual 4 Ohm SPDT Switch NO/NC
AS1746: Dual 0.5/0.6Ohm, Low Voltage, SPDT Switch, NC/NO
AS1751: Quad 0.9 Ohm SPST Switch NO
AS1752: Quad 0.9 Ohm SPST Switch NC
AS1753: Quad 0.9 Ohm SPST Switch NO/NC
|
|
Cellular Handset Switches - 50 Ohm
Peregrine's high-performance cellular handset switches offer a simple, yet profoundly different approach to solving the toughest high-power, multi-throw switching challenges and are the first and only CMOS-based devices that can be connected directly to the GSM handset antenna.
|
|
Features/Benefits
Current limiting output
Thermal protection
Automatic recovery
Overload protection
Dual output: Two relays in one package
Description
The LPD70 is a dual-output 28Vdc plastic relay with internal thermal protection. The relay utilizes optical isolation to provide excellent input-to-output isolation. The LPD70 offers a current limiting output to protect itself and associated load circuits from transient current overloads. During an overcurrent condition, the LPD70 clamps the current to a safe operating value. The LPD70 also offers thermal protection. The thermal protection is activated by junction temperature. In case of an overload or shorted load condition, the thermal protection limits the junction temperature. The LPD70 returns to normal operation automatically once the overload is removed.
|
|
SIF 4
The SIF4 series contains 4-pole relays with forcibly guided contacts according with EN 50205 in an extremely flat design (10.9 mm). This relay series stands out for a large switching current range. Component installation under the relay is possible.
- Contact mounting 3NO / 1NC
- Switching current range 5 mA to 8 A
- Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
- Low coil excitation and retention capacity
- Design (LxWxH) 41 x 29.4 x 10.9 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: access control, interfaces, transportation, robotics, machine tools
|
|
SIF 6
The SIF6 series contains 6-pole relays with forcibly guided contacts according with EN 50205 in an extremely flat design (10.9 mm). This relay series stands out for a large switching current range. Component installation under the relay is possible.
- Contact mounting 4NO / 2NC
- Switching current range 5 mA to 8 A
- Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
- Low coil excitation and retention capacity
- Design (LxWxH) 53.6 x 33.5 x 10.9 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: access control, interfaces, transportation, robotics, machine tools
|
|
COMUS INTERNATIONAL (formerly known as CP CLARE INTERNATIONAL) is the only remaining manufacturer of MERCURY REED SWITCHES in the entire world. We can offer a complete range of mercury wetted reed switches : make contacts as well as change-over contacts, from 50VA up to 250 VA. High switching capability, very stable contact resistance and an extremely long life expectancy are the strenght of these switches.
These reed switches may still be used, not only for maintenance purposes, but also in some application area's indicated by the European ROHS Directive; monitoring and control instrumentation and medical equipment systems.
Application markets where these switches are highly used are ATE (automatic test equipment) and other test equipment, instrumentation and control equipment, power control, traffic regulation systems, etc...
|
|
The Bestact reed element is a highly reliable, broad control range reed switch that when used and implemented in various application products provides a user or manufacturing operation the utmost in uptime and throughput. Its broad control range allows a user to select one switch for any control load from TTL logic to fractional DC horsepower, thereby decreasing the various types of control devices needed for spare parts allocation while ensuring the same reliability levels.
|
|
Comus high voltage reed switches (HBS series) have been successfully developed and manufactured in Belgium for many years. Production in our Indian facility has been set up. The process and parts have been approved, enabling us to offer low and competitive prices on the market.
Having our own manufacturing of high voltage switches also allows us to offer very competitive prices for high voltage reed relays. They are available in 1 form A, 2 form A, 4 form A, 1 form B and 1A1B configurations, having 7KV, 10KV or 14 KV dielectric strength.
Common applications are high voltage testers, cable testers, medical instrumentation, defibrillators, industrial process control and power applications.
|
|
Description
High voltage Reed Relays for PCB mounting suitable for switching voltage up to 10 kVDC and breakdown voltage up to 15kVDC. This series is available with high voltage cables. Standard available in 1 Form A and 1 Form B switching configurations. 2 Form A and 1 Form C with a switching voltage of up to 2500 VDC are available, please consult factory.
Features
Available with external contact blades
1-2 Form A, 1 Form B, or 1 Form C switches available
Suitable for switching high voltages
Power switches up to 100 W available
Special pin outs available
Applications
High voltage test sets
Cable testers
Medical equipment (RF surgery)
|
|
A Reed relay consist of a reed switch and coil fitting into a housing which could be plastic, metal or moulded.
Reed relays generally have a faster response time than electro-mechanical relays, lower coil consumption and
are smaller in size. Furthermore, the switch is sealed in a dry inert atmosphere preventing the ingress of contaminants.
|
|
|
The adaptable RU series are available in either 2 pole (DPDT) or 4 pole (4DPDT) models. Both RU2 and RU4 models have multiple standard features, including a non-polarized green indicator LED, a mechanical indicator flag, an easily accessible and replaceable marking plate, and a manual latching lever, coded orange/red for AC coil and green/blue for DC coil.
|
|
|
The adaptable RU series are available in either 2 pole (DPDT) or 4 pole (4DPDT) models. Both RU2 and RU4 models have multiple standard features, including a non-polarized green indicator LED, a mechanical indicator flag, an easily accessible and replaceable marking plate, and a manual latching lever, coded orange/red for AC coil and green/blue for DC coil.
|
|
Everel relay sockets meet various application requirements with five main series:
sockets for relays with 8-11 pins (octal-undecal)
sockets for miniature relays
sockets for PCB relays
sockets with PCB pins for PCB relays
sockets for Slim relays
Our offer is completed by an highly diversified series of accessories and modules.
|
|
|
Designed with attention to every detail, IDEC Relays go the extra mile in performance and dependability. RU relays are constructed with no internal wiring in a 100% automated, robotic-assembly process, which for you means no weak solder points. Our RH relays are built-to-last and 3rd party tested at 500,000 operating cycles, even though UL approval only requires an electrical lifespan of 6,000 cycles. And the newest addition to our relay family is no exception. RJ relays have an optional green, non-polarized LED that uses a unique light guide to give you a brighter and more noticeable status indicator, viewable from multiple directions
|
|
- contains RM40, RM50, RM84, RM84 SMD, RM85, RM85 inrush, RM85 faston, RM85 SMD, RM85 105 °C, RM87, RM87 SMD, RM96, RA2, RM960, RMB961, RMB962, RM699V, RM699H, RM63, RMB631, RMB632, RM64, RMB641, RMB642, RM83, RM92, RM93, RM94
- Range of rated load: from 5A up to 16A
- Range of coil voltage: from 5 up to 220 V DC and from 6 up to 380VAC
- Assembly: plug-in sockets for DIN rail or for panel, PCB
|
|
|
Yaskawa's Bestact high capacity 3 and 5 amp reed relays (RI & RZDR- series) offer industry DIP standard mounting format. They have UL/cUL recognition for gaseous Class I, Division 2 hazardous locations or corrosive environments and have been shown to significantly reduce downtime and/or maintenance costs. These relays have pilot duty inductive switch ratings of 360VA (AC), 69VA (DC) and horsepower ratings of 0.5 and 1/8 HP respectively. For low-level loads, they exhibit a wiping action that keeps contact resistance very low and stable. 2 and 4-pole configurations of normally open and normally closed contacts are available.
|
|
|
The IMO Power Relay range offers switching capabilities up to 60A, with a wide range of termination and mounting options the range also includes products that offer High Isolation.
|
|
High inrush currents with AgSnO contacts (TV4 = 65 A)
4 kV/8 mm coil-contact
Reinforced insulation (protection class II)
Ambient temperature up to 85°C at 8 A
Plastic materials according to IEC60335-1 (domestic appliances)
RoHS compliant (Directive 2002 / 95 / EC) as per
Applications
HVAC, interface technology, power supplies, TV-/Monitor control,
computer-/communication technology, domestic appliances, Hi-Fi
products, timers, etc
|
|
- contains RSM850, RSM850B, RSM822, RSM832, RSM954, RSM957
- Range of rated load: from 0,5A up to 5A
- Range of coil voltage: from 3 up to 48 V DC
|
|
|
Yaskawa's Bestact™ high capacity 3 and 5 amp reed relays (RI & RZDR- series) offer industry DIP standard mounting format. They have UL/cUL recognition for gaseous Class I, Division 2 hazardous locations or corrosive environments and have been shown to significantly reduce downtime and/or maintenance costs. These relays have pilot duty inductive switch ratings of 360VA (AC), 69VA (DC) and horsepower ratings of 0.5 and 1/8 HP respectively. For low-level loads, they exhibit a wiping action that keeps contact resistance very low and stable. 2 and 4-pole configurations of normally open and normally closed contacts are available.
|
|
SIR 4 Power
The SIR4P contains extremely powerful, compact 4-pole power relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 12 A. 2 powerful contacts for loads with a high surge current (up to 60A) in the AC and DC range and 2 checkback contacts.
- Contact mounting 2NO / 2NC or 3NO / 1NC
- Switching current range 10 mA to 12 A
- Coil voltage 6 VDC to 110 VDC (non-standard coils available upon request)
- Coil loss power 0.75 W
- Design (LxWxH) 46.4 x 16 x 30.7 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: door controls, motion control, transportation, farm machinery
|
|
SIP 6
The SIP6 series contains extremely powerful 6-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 16 A. Crown contacts for high switching reliability at the two readback contacts and 4 power contacts up to 16A and 60A surge currents. For the highest loads during 3-phase applications and DC loads.
- Contact mounting: 4NO, as power contacts 1NO / 1NC or 2NC signal contacts
- Switching current range 10 mA to 16 A
- Coil voltage 6 VDC to 220 VDC (non-standard coils available upon request)
- Coil loss power 1.3 W
- Design (LxWxH) 84.6 x 20 x 32 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: hydraulic controllers, construction machinery, lifting technology, off-shore applications, door control
|
|
Having our own dry reed switch manufacturing and being the only remaining manufacturer of mercury wetted reed switches in the world, the COMUS group is in a privileged position to offer dry reed relays as well as mercury wetted relays to a broad range of application markets.
Molded SIP's and DIP's and covered housings are available in different sizes and different contact forms (1, 2, 3 and 4 form A - 1 and 2 form C contacts). Partnumbers as 3563, 3565, 3570, 3572, 3573, 3582, 3585, 3880, MSS2, MSS4, MSS6, MSS7, MVS2, MVS4, MVS6, MVS7, GRMA, HGZM, MHCE, CUP, GUP, 851 and MHMG are available.
|
|
|
|
|
|
Description
With the extensive BE Series you have the choice between a metal and a plastic casing. The globally current pinnings assure the availability of widely pin-compatible Reed Relays. According to the different casings, either 1 to 5 form A switches, 1 to 2 form C switches, 2 Form A and 2 Form B switches or 1 to 2 bistable (E) Form A switches are offered. Special low thermal versions are also available. The BE series is completely potted with a durable flexibly Polyurethane resin. Versions with an extremely high insulation resistance of 1014 Ohm achieved through a special PU potting compound are also available for special requirements of test systems, medical equipment and precision measuring devices. This series` range of applications is very wide-spread due to the variety of possible contact combinations:
Features
Up to 5 switches in a package (Consult factory)
Normally closed option
Metal and Plastic casings available
Latching version available
4.5 kVDC (3.0 k VRMS) contact to coil option
High contact to coil voltage
Large assortment of pin out schemes
High life expectancy
Low thermal versions available
Applications
Telecommunication
Medical equipment
Test and measurement
General applications
|
|
Having our own reed switch manufacturing and beinga distributor of OKI dry reed switches, the COMUS GROUP is able to supply every market and every customer with a wide range of different reed switch types.
From very small reed switch types, as the 7 mm GC2107, the 10 mm ORD211, over the most common used 14 mm types to the heavy duty types, normally open form A or change-over form C contacts, higher pressure or vacuum high voltage switches, COMUS makes them all.
Customized reed switches are available upon request. Cutting, bending, welding extension wires, bistable solutions are commonly asked modifications.
|
|
Description
Glass length of 10.5 mm and diameter of 2.1 mm
Normally open 1 Form A contact
FeaturesRated Power (W) 0 to 10
Switching Voltage (VDC) 0 to 200
Switching Current (A) 0 to 0.5
Applications
General Purpose
Automotive
SpecificationsRated Power (W) 0 to 10
Switching Voltage (VDC) 0 to 200
Switching Current (A) 0 to 0.5
|
|
|
The Bestact reed element is a highly reliable, broad control range reed switch that when used and implemented in various application products provides a user or manufacturing operation the utmost in uptime and throughput. Its broad control range allows a user to select one switch for any control load from TTL logic to fractional DC horsepower, thereby decreasing the various types of control devices needed for spare parts allocation while ensuring the same reliability levels.
|
|
|
|
Miniature relays for electronics, Analog switches
