|
|
Flat headed cylindrical "AMSERT" embedded nuts
"AMSERT" thin countersunk head embedded nuts
"AMSERT" cylindrical countersunk head embedded nuts
"AMSERT" hexagonal and mixed embedded nuts
|
|
- Flat headed cylindrical "AMSERT" embedded nuts
- thin countersunk head embedded nuts
- cylindrical countersunk head embedded nuts
- hexagonal and mixed embedded nuts
|
|
RIVKLE®, RIVKLE® plus and RIVQUICK® fastening systems for sheets and profiles
For inside or outside threads on components with insufficient wall thickness to allow threads to be cut, Böllhoff offers RIVKLE® blind rivet nuts and studs. These are "blind", i.e. mounted from one side, which means they can also be used in hollow profiles.
To cover several product advantages, there are RIVKLE® plus, the optimized blind rivet nuts. For installation, we offer a multitude of installation devices ranging from pliers and semi-automatic units to die heads for production lines/robots.
We offer RIVQUICK® blind rivets for connecting components that are only accessible from one side. They are available as multi-range blind rivets and multi-faceted, self-developed special designs and also as standard blind rivets in accordance with DIN 7337. A wide assortment of installation tools completes the product range.
|
|
Dimensions of m3 in M12
Matter: steel, stainless steel or aluminum
The shapes of head: dish, milled or levelling
The shapes of barrel: cylindrical, grooved, (semi) - hexagonal, opened or one-eyed
Facilitated of installation as a blind man of a tapping on thin sheets,
Allows by setting to assemble several
elements and can receive screws or bolts then
|
|
In steel, aluminium and stainless steel , they are highly resistant and of practical and quick use.
Available in metric thread from ØM3 to ØM12 with cylindrical and hexagonal different sizes, they are used for many applications.
|
|
|
The inserti it threads allow to obtain to you of the reliable and resistant anchorages in presence of materials with thin spessori. It rests can be carried out the “blind person”, on accessible pieces from a single side, fastly and without particular operations. For velocizzare the operation the use of pneumatic attrezature is advised. TECHNICAL NORMS: the immense range of the materials and the shapes used for the construction of the inserti threads allows to you to resolve every inherent problem the assemblage of the ended manufatto one. The three various witness, ROUND, SVASATA and REDUCED concur various and reliable solutions. The materials in steel, aluminum and stainless steel allow a corrected connection to the base structure. Councils to pierce one 0,10 milimeter in more of the external diameter of the file. The hexagonal file concurs an absolute guarantee of possible spins.
|
|
Alu Standard
Alu Countersunk
Alu Small Head
Steel Standard
Steel Countersunk
Steel Small Head
CAP-Alu Standard - airtight and watertight
CAP-Alu Countersunk - airtight and watertight
CAP-Alu Small Head - airtight and watertight
CAP-Steel Standard - airtight and watertight
CAP-Steel Countersunk - airtight and watertight
CAP-Steel Small Head - airtight and watertight
Hexagonal-Steel Standard
Hexagonal-Steel Small Head
Steel Splined Dome Head
Steel Splined Small Head
Steel Splined Countersunk
A2 Stainless Steel Dome Head
A2 Stainless Steel Countersunk
A2 Stainless Steel Small Head
|
|
CLUFIX® blind rivet nut provides the solution to achievement of an
internal thread function in a thin or thick metal sheet or profile.
CLUFIX® also allows the assembly of two or several elements, in the same way as a rivet does, whilst also providing the internal thread function.
|
|
Blind rivet-nuts, open ends or closed ends, with ribs or hexagonal, for thin metal sheets.
All kinds of heads, flat, large, flush, countersunk.
Advantages : Considerable clamping strength, higher than that of a class 8.8 steel screw.
Dimensions : From M3 to M12 ex-stock, other dimensions under request.
Material : steel zinc plated, stainless steel, aluminium, brass.
|
|
Description:
JHZM-M8-6
MATERIAL : STEEL
THREAD SIZE : M8*1.25
TYPE JHZM
THREAD CODE : M8
SHANK CODE : 6
A 0.1 : 6
MIN.SHEET THICKNESS : 6
HOLE SIZE IN SHEET 0.08 : 11
C MAX. 10.98
E 0.25 : 12.7
T 0.25 : 6
other sizes are fully available:
M3, M4, M5, M6, M8
Features:
1. Carbon steel and stainless steel material are available
|
|
* Aluminium, Stainless Steel, Steel, Brass, Nylon, Rubber
* Domehead, Countersunk, Large Flange, zincplated, knurled, underhead knurled, closed end, hexagonal shank, partially hexagonal shank
- TECNUTbasic
Blind Rivet Nuts
- TECNUTmini.basic
Blind Rivet Nuts with mini countersunk
- TECNUTmicro.basic
Blind Rivet Nuts micro with reduced countersunk
- TECNUThexte.basic
Blind Rivet Nuts with partially hexagonal shank
- TECNUThexgo.basic
Blind Rivet Nuts with hexagonal shank
- TECNUTfold
Presslaschen-Blind Rivet Nuts
- TECNUTplas
Blind Rivet Nut with lbrass insert
or Nylon Blind Rivet Nut
|
|
POP NUT™ brand blind rivet nuts are internally threaded rivets that can be installed into sheet-metal, tubing, extrusions, and plastics.
* The POP NUT TL Round Knurled body flat head provides excellent spin out resistance in round drilled, punched or molded holes.
* The POP NUT TK Round body thin head allows the mating part to install nearly flush without a recess or dimple.
* The POP NUT TH Hex Body provides excellent spin out in hex punched, laser cut or molded holes.
|
|
|
|
|
|
|
TP Hi Torque Flat Head open end blind Rivet Nuts are manufactured as turned parts to ensure the accuracy of the concentricity between the outer diameter of the body and the inner wall of the counter bore. Only by accurate machining can the wall remain a constant thickness around the circumference, this ensures that when the products are set, the wall collapses uniformly keeping the thread forms perpendicular to the sheet. This ensures that the threads will not become crossed on installation of the mating screw. The other advantage gained by turning the rivet nut is that a highly effective knurl can be produced on the outside of the body where the clinch takes effect with the sheet. Not only does this mean that the knurl engages the back of the sheet to improve torque resistance performance the knurl also swells to grip the walls of the hole during installation, again improving torque resistance and increasing surface area contact. These products are manufactured in various head and body formats see following part Nos. Hi Torque Rivet Nuts are available in Carbon Steel Zinc plated and Yellow passivated, Code 40 and in Stainless Steel, Code SS.
|
|
|
Insert nuts can self-produce threading on pre-drilled sheet-metals, that cannot be reached from the back. Their use do not cause damages or deformations on materials subject to surface treatment. They are available in stainless steel, steel, aluminium; they can have dome head, countersunk head or reduced head and the size ranges from M3 to M12. They can be cylindrical or hexagonal, open or blind.
|
|
|
|
|
|
Steel inserts designed to provide load bearing threads in thin sheet materials. For hard metric hole sizes.
Key features and benefits
Can be used in very thin sheet materials from 0.25mm (0.0098")
Double diameter body and lead-in chamfer provide easy insertion into hole
Access needed from only one side of the application, for high speed assembly
Provide a female thread in application
Can be installed in pre-coated or post painted applications without damaging the surface
Clamp two or more sheets
Various platings available to increase corrosion resistance
Splined body improves torque-to-turn by up to 50% in soft materials compared to plain body inserts and improve electrical continuity in sheet metal fixings
Low profile head allows near flush fit to application and clamps two or more sheets of material together, within the grip range
Large flange head provides a load bearing surface and reinforces the hole to prevent push-out. Can be used as a spacer and can be supplied with an underhead seal.
Can be used with hand tools, pneumatic tools and fully automated machines to suit a wide range of assembly methods
Assembly applications
Automotive
Electrical engineering
Electronic components
Sheet metal
Domestic appliances
General light fabrication
|
|
|
The Atlas® product line includes two basic types of threaded rivet nut products. The Atlas SpinTite® product line includes a variety of inserts which satisfy most applications where strong one side thread installation is required. Of course if a standard product does not fit your need, please contact us so that we can make other recommendations. We also offer cost effective and easy to use installation tooling for our complete line of fasteners.
|
|
FLUSHFIX® is the solution for virtually flush thread on the internal walls of a tube, or on a single metal sheet when a flush finish is necessary on the opposite side to crimping.
Because it is flush-fitting, FLUSHFIX® allows one tube to both slide and block inside another.
The FLUSHFIX® installation is completed without welding, thus eliminating the need for any reworking.
FLUSHFIX® : The unique blind rivet nut with a flush finish on the opposite side to crimping.
|
|
The CAGE-NUT is a square steel or stainless steel nut enclosed in an elastic metal cage.
- The CAGE-NUT allows tolerance in alignment or positioning.
- Hand-operated installation by compression of the cage in the indenting device.
- Dimensions: M3 to M12
|
|
The cage-nut allows a fast fastening in thin metal sheets, already punched.
Advantages : can be put in and off rapidly
Dimensions : From M3 to M10 ex-stock, other dimensions under request.
Material : Cage in steel or stainless steel, nut in steel or stainless steel.
|
|
|
|
|
|
|
CN Cage Nuts represent the traditional European metric size based products used for years in all aspects of European manufacturing. The greater variation on panel ranges has allowed these products to superceed the traditional UK sizes which were limited to only two panel ranges.They are totally interchangeable with the old standards but offer the designer greater choice of Hole Sizes and Panel thicknesses. They are particularly usefull where the advantage of floating thread forms are required to overcome out of tolerance mating parts. The fact that the nut floats in the cage offers a simple cost effective solution to this otherwise expensive problem. The cage nut can be used in blind applications; it can be fitted after painting of the panels and so offers the designer lots of advantages. Traditionally offered in Zinc and Yellow Passivate and in Stainless Steel these parts can be supplied with a combination of plated nuts with Stainless Steel cages or vice versa. Code 40111 M?? 40 defines Spring steel cage, steel zinc/yellow nut. Code 40112 M?? SS defines Stainless cage Stainless nut. Code 40113 M?? 4S defines stainless cage, steel zinc/yellow nut. HSL, in line with all other manufacturers of spring steel clips, refuses to accept liability for any premature failure of any spring steel part it supplies with an Electro-Plated Finish that has been specified by the customer, due to uncertainty regarding the incidence of, identification of, control of and removal of Hydrogen Embrittlement. Despite accurate processing controls, baking/anealing cannot be relied upon to guarantee removal of Hydrogen. We strongly recommend alternative finishes be specified.
|
|
Description:
JAC-024-1
Thread Size: 0.190-24(#10-24)
Thread Code: 0.24
Shank Code: 1
A max: 0.038
Min. sheet thickness: 0.040
Hole size in sheet +0.03: 0.406
Min. Dist Hole C/L To Edge: 0.36
C max: 0.405
D max: 0.405
E + - 0.25: 0.47
T1 max:0.17
T2 max:0.27
other sizes are fully available: 440, 632, 832,032, 0420, 0428, M3, M4, M5, M6.
Features:
1. Self-adjustment function can complement the error of hole size in sheet.
2. Locking and non-locking styles both are available.
3. Carbon steel and stainless steel material both are available..
|
|
|
CNF Captive Floating Clinch Nuts are a very useful fastener for reducing the problems caused in assembly of pre-fabricated boxes where tolerance build up or inaccuracies due to bends occurs. Whilst the outer shell of the fastener is captive in the sheet there is a separate inner nut which moves within the outer shell without rotating. This allows the small amount of movement required to 'fix' the tolerance errors. Available in Steel Zinc and Clear Code 60, or Stainless Steel Code SS. These products are suitable for use in materials of Rockwell Hardness of B - 70 or less.
|
|
AS, AC, LAS, LAC
Floating action compensates for mating hole misalignment. Available with locking or non-locking threads. Thread sizes #4 to 1/4" and M3 to M6.
LK, LKS, LKA
The PEMFLEX® design provides MIL-N-25027 locking performance without damaging mating threads. Thread sizes #2 to #10 and M2.5 to M5.
WN, WNS
Unique PEM design prevents burnouts and eliminates the need for indexing and retapping to remove weld spatter. Thread sizes #4 to 1/4" and M3 to M6.
|
|
Description:
Incline knurl Nuts
Installing nuts in sheet materials which are difficult to joint
This method is easy to apply.
Characteristics:
1.Treatment of thin sheet.
Install this nut on sheet with thickness of not less than 0.6mm.
2.Materials that is difficult to joint with.
This nut can be used on steel materials that is hard to joint with ,and also on materials such as aluminum ,stainless steel and plastics.
3.High installing strength
The part under head has its unique shape,when it is pressed in,sheets are fixed,and higher installation strength is obtained.
4.Easy installation
5.No need for special tooling ,air pressure and hydraulic pressure would be enough for simple installation.
6.The opposite side of nut is flat while the surface is not.
7.Still can be used after surface treatment
|
|
An easily fitted insert.
The CLAV-SERT thread inserts consist of rigid one-piece bushes
Depending on the diameter of the insert, 2 or 4 grooves in the bush have 2 or 4 locking keys.
Resistant to pulling
The fitting of the insert could not be simpler. It is enough to drill a hole, tap it to the required dimensions, screw in the insert and lock it in position by simultaneously pushing the 2 or 4 keys which will hold the insert against the walls and prevent it from rotating.
CLAV-SERT can be fitted in any material, whether ferrous or non-ferrous.
|
|
The CLAV-SERT thread inserts consist of rigid one-piece bushes.
Depending on the diameter of the insert, 2 or 4 grooves in the bush have 2 or 4 locking keys.
The fitting of the insert could not be simpler. It is enough to drill a hole, tap it to the required dimensions, screw in the insert and lock it in position by simultaneously pushing the 2 or 4 keys which will hold the insert against the walls and prevent it from rotating.
CLAV-SERT can be fitted in any material, whether ferrous or non-ferrous.
|
|
KEENSERT® inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. KEENSERTs are available with locking or non locking internal threads.
Benefits:
-Significantly increases load capability in weaker materials.
-Special keys lock the KEENSERT into place, eliminating rotation.
-Easy to install - no special taps required and no tangs to remove.
-High resistance to torque out and pullout.
Standard
Locking
Stud
Blind
|
|
Keylocking, Thinwall Industrial Style (Metric)
Material: Carbon Steel Inserts - C1215 or equivalent Stainless Steel Insert - 303 Keys - 302
Finish: Carbon Steel Inserts - Parkerized Stainless Steel Inserts - Passivated
Tolerances: Metric ±.25mm
|
|
Threaded inserts and standard threaded studs for heat insertion, moulding or cold insertion, in all types of plastics.
Advantages : Offers a resistant tapped or threaded mounting, avoids stress in plastics, high resistance to tensile strength and tightening torque.
Material : brass
Dimensions : from M1.6 to M10 ex-stock, other dimensions under request.
|
|
|
|
Inserts
