|
|
| This machine is the result of the last VERNET BEHRINGER's design. It is using the latest technologies. This gives a strong, simple to use, fast working and precise machine. The design of this machine is also modern and innovative. |
|
PHOENIX®II 275HC
The PHOENIX®II 275HC bevel gear cutting machine is the next generation in manufacturers of cutting machines. The unprecedented monolithic column design is leading edge technology in chip flow, ergonomics, stiffness, cutting process, and maintainability. Pivoting the cutter spindle permits the shortest structural overhang of both the cutter and work for maximum stiffness and thermal stability. A simple chip collector is the only object below the cutter and work supplier of spindles. Chips never touch the machine structure. |
|
New Bihler bushing machine RM 40B
Highest productivity, precision and process security in bush manufacturing
Perfectly designed for the manufacture of cylindrical, straight bushes and flanged bushes, the RM 40B can produce these types of bushes without problems from 6 to 18 mm inner diameter and up to a maximum of 40 mm in long (max. strip dimensions 1.5 mm x 40 mm). The machine speed is infinitely adjustable and varies subject to the type of bush. If the speed, for flanged bushes (collared bushes), is at 250 1/min, it climbs to 400 1/min for cylindrical, straight bushes.
Bihler offers the RM 40B as cost-effective complete package. Consisting of compact basic machine, standard accessories (mechanical gripper feed, strip professional straightener, 70 kN 12 mm stroke two-point eccentric press, two 30 kN normal industrial slide units with 25 mm stroke, 30 kN central mandrel with 50 mm stroke, 60 kN transverse professional press with 35 mm stroke, rotary table drive, user and personnel protection), tool components (basich tooling, two sets of tool fixtures) and the new user-friendly Bihler VariControl VC1-E the customer obtains added-value which pays off immediately.
Besides its high degree of productivity and process security the Bihler bushing machine stands out for shortest tool changeover times (less than 10 min.). This is possible due to its simple rapid-change tooling system to be handled via switch and the second set of tool fixtures that can be pre-equipped for another bush type. The tool components’ top degree of standardization ensures that they can be used all around the world and, by the efficient work of operators, considerably adds to increase machine runtimes. |
|
| CNC professional routers by MultiCam are legendary for their ease-of-use and versatility. Successful companies around the world rely on MultiCam routers to automate production in countless different industries. Whether being used to create intricate 3D architectural moldings and furniture, large-scale outdoor lighted signage or premier-quality acoustic guitars, MultiCam routers work hard to create high-quality and consistent results. To learn more about MultiCam's CNC Router systems click the navigation to the left or an image below. |
|
The machine consists of a frame which includes a saddle consisting of a longitudinal slide, a traverse slide and a swiveling table (on request).
The tool is secured to the head of the tool-holding slide, which vertically professional slides on the fixed and tilting head. An eccentric saddle connected to a connecting rod, transmitting the movement to the tool-holder, gives the movement. The speed regulation is obtained by means of a frequency switch that changes the motor revolutions and, therefore, the slide jogs. |
|
Contourbreton NC260K
New series of 4-axes contouring machines "Contourbreton NC 260K"
These new models are recognizable by the "K" letter followed by a number
indicating the travel range of the Y axis.
The new technical characteristics, valid for the whole "K" series, are the
following:
- X axis travel: 3.500 mm
- table top / manufacturer of spindle nose distance: 480 mm
- vacuum cup height: 150 mm, to allow working with two overlapping tools fixed to the same tool-holding cone
- possibility of accommodating cones with two overlapping tools in the tool-store
- possibility of accommodating two cutting heads in the tool-store.
CONTOURBRETON NC 260K15 - ideal for small-scale productions
- Axes travels of 3.500x1.500x260 mm
- Fixed work-table
-Automated tool store with 12-12 positions
This machine can be shipped in a 20' O.TOP container
CONTOURBRETON NC 260K18 - ideal for medium-scale productions
- Axes travels of 3.500x1.800x260 mm
- Fixed work-table
- Automated tool store with 14-14 positions
This machine can be shipped in a 20' O.TOP container
CONTOURBRETON NC 260K23 - ideal for medium/large-scale productions
- Axes travels of 3.500x2.300x260 mm
- Fixed work-table
- Automated tool store with 18-18 positions
This machine can be shipped in a 20' FLAT container
|
|
TK 410 One splindle copy milling
• Machining on three faces.
• Milling capacity: X= 2800 mm, Y= 200 mm, Z= 150 mm.
• Very sturdy structure also suitable for machining steel thick up-to 3 mm.
• Manufacturer of spindle with Inverter complete with adjustable revolving speed from 5400 to 12000 rpm.
• Oleo-pneumatic down stroke and up stroke of the work unit with 2 adjustable speeds: rapid (approach) and slow (milling). Stop device on the Z axis to eliminate the machining vibrations.
• Adjustable zero stops positioned on the two ends of axis X.
• Atomized automatic lubrication.
• Complete with three containrs for chips and swarfs.
Axes X, Y, Z move on manufacturer of linear guides
Vast work capacity |
|
Electro-Chemical Machining (ECM) is based on Faraday's Law of electrolysis. It may be used for machining, drilling, grinding or de-burring.
Winbro Group and its team of dedicated engineers have a wealth of experience gained through a combination of "hands on" and exposure to state of the art technology.
Process control
The control of process variables is achieved via information fed from instruments and gauges to the industrial process controller. Machining parameters are recorded and may be displayed in graphic form on a machine-mounted screen.
A signature analysis of the optimum parameters used for any particular operation can be established. Should the parameters deviate from pre-set bands, a warning signal is generated, allowing suitable action to be taken. As this is often an early warning of potential malfunction of some element of the system, serious damage is avoided.
Professional power supply
Winbro Group has developed a micro processor controlled, intelligent pulsed power supply which gives superior performance. This is particularly the case where long electrolyte flow paths exist. |
|
VSC 400 DUO WF
This gear profiling center - its design is based on the VSC series - soft finish-machines the gear profile complete, employing turning, hobbing and deburring operations. |
|
| Hypoid Lapping machine, bringing a new dimension of features and process capability to the lapping process. This fast and flexible machine offers new levels of productivity to the automotive, industrial and truck markets. Reduced cycle-times, efficient and powerful software, and a robust compound handling centre are some of the features that make this the lapper of choice around the world. |
|
Drake GS:H (Gear System: Hobber) brings new levels of productivity to vertical hobbing of helical, spur, spline, worm ... straight, tapered or crown gears.
Drake's customized CNC programming cuts set-up time drastically, perfect for today's short-run environments. |
|
| Hobbing Machine is a vertical hobber capable of producing gears and shafts with an outside diameter as large as 130mm. The Genesis Hobber was designed as a totally new product incorporating the most modern features and capabilities required to today's gear production. |
|
S 300 R
The S 300 R rotor hobbing machine is based on the tried and tested modular system of the S series medium range of machines, and was specially conceived for rotor manufacturing requirements. Given the cutting forces typical of this type of application, particular attention has been placed on the rigidity of moving components; in fact a strong and stable hobbing suppliers of spindle with a high swivel range guarantees jolt-free hobbing of even the largest rotors, with or without coolant, whilst a powerful, fast, high-torque tool drive ensures top-quality performance, when single index milling small rotors or when cutting larger workpieces. Integrated steady rests guarantee vibration-free machining. Naturally it is possible to use hobs for small rotors as well as inserted blade manufacturer of milling cutters for larger workpieces.
Special attention has been paid to the drives, and benefits to the user are twofold; not only are workpieces machined efficiently using innovative tool technology and materials, but it is also possible to fully exploit any future in-house tool developments. We would be delighted to advise you on your specific application.
|
|
EMAG KOEPFER Gear Hobbing Machines
The machines combine cutting edge technology with the highest degree of flexibility in the machining of professional gears, pinions, worms and worm gears with up to 195 mm dia. / module 4.
The composite epoxy bed provides a static, dynamic and thermally stable base for the machine. Highly flexible, easily reset automation systems allow for even small component batches to be manufactured automatically.
|
|
S 900-2000
The S 900-2000 series is a universal and modular line of hobbing machines, conceived to satisfy a wide range of applications. High performance machining of straight and spiral gears; crowned and tapered gears; worm gears; cluster gears and special profiles (such as compressor-type rotors); oval gears; herringbone gears (gears with a double helix); and internal gears. This series can utilise any hobbing technology, from single-cut form milling cutters, to HSS or manufacturer of carbide tools for wet or dry hobbing applications, or roughing and hard finishing tools, and it is ideal for machining both internal and external gears. Chamfering and deburring using an NC-controlled hob suppliers of spindle and relative control unit is also optional.
|
|
The Grooving Machine Aryma GM usually is employed in connection with the Circular Shear Aryma to produce internal and external rings for spiral gaskets.
The Aryma GM was specially developed for the cold forming of grooves at the inside diameter of metallic rings for spiral gaskets. |
|
| AP&T are providing professional presses and high pressure systems for hydroforming of profiles, tubes and sheet metal. |
|
Automatic system for the code bitting (on one side of the key), deburring, marking and ringing of one or many twin keys.
This system has been manufactured with high technologies to reach precision, repeatibility, high productivity and low set-up times.
This system can process brass, steel, zama and special nichel keys. |
|
Ortobreton 4EM
Four-column block professional saw "ORTOBRETON Mod. 4EM" for marble
The block saw holds blades with diameter up to 1.700 mm.
The movement of both the spindle manufacturers-holding Carnage <3 na the beam are in an oil bath, always precise, rapid and well protected.
Once the beam has reached the correct position, it is blocked laterally on
the bridges by means of a double oil-pressure device.
The two bridges move on sliding blocks with play adjustment along the
professional guides, which are housed inside the columns, well protected by labyrinth professional seals.
The spindle-holding carriage is moved horizontally by an electric motor controlled by an industrial inverter.
The 550 mm 0 horizontal blade spindle is mounted vertically on one side of the carriage and it can be adjusted in height by a box and pinion assembly powered by a reducer with inverter-controlledA/Cmotor.
The unit is equipped with a mechanism for the automatic compass movement of the blade.
The rectified and dynamically balanced spindle shaft guarantees an exceptional precise rotation.
|
|
Squaring/chamfering machine mod. BCS
Machine to rectify and chamfer edges on ceramic tiles of various dimensions and thickness. The rectifying process makes the edges of the tile parallel and square. The machine consists of two operat-ing sections equipped with opposed spindles manufacturers, which are connected by a rotator.
|
|
These machines are able to manufacture pulleys in plate, folded, split,or POLY-V form.
Either in vertical or horitzontal actions with either automatic or CNC control. |
|
Fom INDUSTRIE Product Development department can create complete cutting and machining lines based on the customers’ specific technical needs and highly customized on their exclusive professional production requirements. The latest technology is employed to produce complete automated implants. FOM automated implants have numerous applications in many different areas including transport, urban architecture, professional building and in the production of windows and professional doors.
The standard configuration of the cutting and working line is an automatic system made of 5 different working units. |
|
|
|
Other machining machines ...
