|
|
RAM DRIVE WITH ROD SYSTEM
The great versatility and precision of the models 500 and 500A are the outgrowth of the long experience of our Technicians and the observance of the suggestions of our most exacting Customers.
All sliding surfaces are covered by antifriction material (PTFE), ground and scraped.
The tables are provided with a wide central through hole for machining long shafts.
Each CN-axis is driven by BRUSHLESS motor with DRIVER; both are controlled by CN system.
The CN system allows the operator to easily program the most complicated job.
|
|
RAM DRIVE WITH RACK AND PINION SYSTEM
The natural evolution of technology has allowed conceiving these heavy duty slotting machines with 4 CN-axes.
A very innovative solution is the CN system on the axis of ram movement (axis Z) on models 500E, 500EA and 500EA(850).
The CN system on the 4th cutting axis is offering many considerable advantages:
- Drastic reduction of setting time;
- Significant improvement in quality of cutting motion. In fact the Brushless motor with Driver is transmitting a continuous motion with constant torque from beginning to end of cutting cycle;
- Minor wear of the tools, as consequence of the more regular cutting motion in comparison with the conventional slotting machine with Rod system for ram drive.
|
|
The new model of slotting machine "type 4AC" is the outcome of our long years as leading manufacturers of Slotting Machines, which has allowed us to widen the range of the already known machines with 1, 2, 3 electronic axes.
The 4 axes slotting machine has been conceived and carried out in order to reduce considerably tooling times, to execute special machining and to increase the power and the quality of slot cutting.
The new 4AC version together with our tools production (see tools catalogue) will optimize slot execution and will make the slotting machine an essential and much appreciated machine tool in every workshop.
|
|
The F Series, articulating five axes Machiníng Centres, are designed and built with rigidity, agility and flexibility in mind.
F Series specially feature an extra rigid construction with opposing slide ways on the Z axis and the reinforced cross beam to ensure straightness and squareness precision is maintained even with its extra long Y-V-axes.
|
|
|
This machine is the result of the last VERNET BEHRINGER's design. It is using the latest technologies. This gives a strong, simple to use, fast working and precise machine. The design of this machine is also modern and innovative.
|
|
PHOENIX®II 275HC
The PHOENIX®II 275HC bevel gear cutting machine is the next generation in cutting machines. The unprecedented monolithic column design is leading edge technology in chip flow, ergonomics, stiffness, cutting process, and maintainability. Pivoting the cutter spindle permits the shortest structural overhang of both the cutter and work for maximum stiffness and thermal stability. A simple chip collector is the only object below the cutter and work spindles. Chips never touch the machine structure.
|
|
Ideal for any mechanised workshop.
Robust quick and easy to set up, its characteristics give it the versatility to be used in many different types of broach work.
We supply one of the best broachers in the market, which is manufactured under strict quality controls and guarantees the greatest reliability and durability.
|
|
Thanks to its experience in refurbishing and transformation of horizontal and vertical broaching machines, Cinetic Machining has designed and developed a horizontal broaching machine especially designed to broach discs and turbine blades.
With its many references and its unique expertise in the aera of broaching,
Cinetic Machining is able to develop specific broaching solutions according to your specific needs.
Cinetic Machining develops broaching machines especially designed to serve:
the Automotive industry
the Aircraft industry
the Energy industry
According to the shape to be obtained, there are various types of solutions we offer:
Vertical or horizontal machining
High broaching speed
Adapted power and pulling force
High efficiency using multi broaching process
Complementary full CNC axis control
Auxiliary and optional equipment
|
|
|
|
|
|
New Bihler bushing machine RM 40B
Highest productivity, precision and process security in bush manufacturing
Perfectly designed for the manufacture of cylindrical, straight bushes and flanged bushes, the RM 40B can produce these types of bushes without problems from 6 to 18 mm inner diameter and up to a maximum of 40 mm in long (max. strip dimensions 1.5 mm x 40 mm). The machine speed is infinitely adjustable and varies subject to the type of bush. If the speed, for flanged bushes (collared bushes), is at 250 1/min, it climbs to 400 1/min for cylindrical, straight bushes.
Bihler offers the RM 40B as cost-effective complete package. Consisting of compact basic machine, standard accessories (mechanical gripper feed, strip straightener, 70 kN 12 mm stroke two-point eccentric press, two 30 kN normal slide units with 25 mm stroke, 30 kN central mandrel with 50 mm stroke, 60 kN transverse press with 35 mm stroke, rotary table drive, user and personnel protection), tool components (basich tooling, two sets of tool fixtures) and the new user-friendly Bihler VariControl VC1-E the customer obtains added-value which pays off immediately.
Besides its high degree of productivity and process security the Bihler bushing machine stands out for shortest tool changeover times (less than 10 min.). This is possible due to its simple rapid-change tooling system to be handled via switch and the second set of tool fixtures that can be pre-equipped for another bush type. The tool components’ top degree of standardization ensures that they can be used all around the world and, by the efficient work of operators, considerably adds to increase machine runtimes.
|
|
|
CNC routers by MultiCam are legendary for their ease-of-use and versatility. Successful companies around the world rely on MultiCam routers to automate production in countless different industries. Whether being used to create intricate 3D architectural moldings and furniture, large-scale outdoor lighted signage or premier-quality acoustic guitars, MultiCam routers work hard to create high-quality and consistent results. To learn more about MultiCam's CNC Router systems click the navigation to the left or an image below.
|
|
Item No. : NC-0503
Product Name : CNC Router
1) PC based CNC Control.
2) Graphic conversational input function.
3) Powerful vacuum suction table.
4) Variable spindle speed controlled by frequency inverter.
5) Air cylinder counter-balance on z-axis for high machining accuracy.
6) Heavy gauge steel frame of machine is tempered for deformation-free.
7) Linear guide ways on 3 axes.
8) 3 Axes traverses are transmitted by high precision ball screws, and driven by servo motors.
9) The spindle accommodates router bit and shaper cutter.
10) 20,000 rpm high spindle speed.
11) AIR COOLING FOR SPINDLE.
|
|
The B Series is the most robust, precise and productive machine in the complete Muitiax line of CNC Routers.
Designed and built to run 24/7 for the most demanding CNC users in the wood, N/F metals, plastics and composites industries.
The B Series features a heavy duty construction, oversized, to deliver long-iife reliability and consistent high precision.
|
|
|
|
|
|
|
Flexibility and customisation are the key elements in the Arrow routing centres. The machine can be used to process solid wood furniture, kitchen units, office and bedroom furniture, and is mainly destined for use by large and medium industries. Specialisation in specific machining operations, reliability when working with single, large, thick pieces and in nesting operations, these are the main characteristics of the Arrow processing centre. Thanks to its high level of customisation and its versatility the Arrow router machine is suitable to carry out the widest possible range of machining operations, from solid wood door and window frames to all those operations requiring fast panel feed-through rates. Arrow is available with a flat table or with a bar table, interchangeable with two working units and two different types of tool change device. The structure is extremely rigid, comprising a monolithic base and a beam designed to deal with the highest levels of strain and dynamic stress imposed by the machining operations. The machine is offered with a doubled table so as to carry out loading operations during masked time, without slowing down the manufacturing process. The Arrow line uses extremely powerful electrospindles, up to 13.5 kW if air-cooled and 15 kW if liquid-cooled.
|
|
TK 410 One splindle copy milling machine
• Machining on three faces.
• Milling capacity: X= 2800 mm, Y= 200 mm, Z= 150 mm.
• Very sturdy structure also suitable for machining steel thick up-to 3 mm.
• Spindle with Inverter complete with adjustable revolving speed from 5400 to 12000 rpm.
• Oleo-pneumatic down stroke and up stroke of the work unit with 2 adjustable speeds: rapid (approach) and slow (milling). Stop device on the Z axis to eliminate the machining vibrations.
• Adjustable zero stops positioned on the two ends of axis X.
• Atomized automatic lubrication.
• Complete with three containrs for chips and swarfs.
Axes X, Y, Z move on linear guides
Vast work capacity
|
|
|
|
|
|
Electro-Chemical Machining (ECM) is based on Faraday's Law of electrolysis. It may be used for machining, drilling, grinding or de-burring.
Winbro Group and its team of dedicated engineers have a wealth of experience gained through a combination of "hands on" and exposure to state of the art technology.
Process Control
The control of process variables is achieved via information fed from instruments and gauges to the process controller. Machining parameters are recorded and may be displayed in graphic form on a machine-mounted screen.
A signature analysis of the optimum parameters used for any particular operation can be established. Should the parameters deviate from pre-set bands, a warning signal is generated, allowing suitable action to be taken. As this is often an early warning of potential malfunction of some element of the system, serious damage is avoided.
Power Supply
Winbro Group has developed a micro processor controlled, intelligent pulsed power supply which gives superior performance. This is particularly the case where long electrolyte flow paths exist.
|
|
|
|
|
|
SEMA finishing cells, Mini factories
Finishing cells or minifactories are for SEMA several different, connected processes or plants for part machining or finished processing of workpieces.
SEMA prepares and takes upon for this the responsibility for the complete conceptions.
· Application for large-sized number of pieces with different processes
· From simple up to high complex processing demands with several
multiple axle units and NC-main pivot in different machines
· Connecting the production process starting from the raw material over
the machining and finally the deposit of the finished parts at the
workpiece deposit device.
· Integration of controlling, measuring or cleaning processes into the
complete machining sequence.
· Manual oder automatical feeding or part transfer between the
machines with pallets transfer system, portal feeder solution or robot
solution
· Feeding of the parts as bulk goods by sorting plant or processing of
workpieces from the rod (cylindrical, cubical oder profile)
· Massive machine base frames in welding or mineral casting quality
· In the machine integrated workpiece measuring systems for
interactive data editing and feedback of the data in the
production process.
|
|
Full-automatic NC Centering Machine
- MAX. 47 inches! Compact chamfering machine for LCD.
- High quality, High productivity with the multi-grinding wheel!
- Compact machine with Max. 47 inches capacity!
- High accuracy and stable machining are realized with high rigidity flame!
- Maintenances and operatinons are improved by integrated control!
- Setting up and maintenance are improved
|
|
VSC 400 DUO WF
This gear profiling center - its design is based on the VSC series - soft finish-machines the gear profile complete, employing turning, hobbing and deburring operations.
|
|
M644 Duplex - Worm milling machine
One and and multiple start worms and double-lead worms right/left
Max. module in steel = 2.5 mm
6 or 8 CNC axes
Various loading systems
Short reset times
|
|
M651 - Worm milling machine
One and multiple start worms and double-lead worms left/right
Up to module 3.5 mm
5 CNC axes
Mobile CNC tailstock
Positioning device for skiving and finishing
Various workpiece feeds
Short reset times
|
|
The complete Liebherr-Verzahntechnik gear cutting machines program contains:
Production machines for gear hobbing and shaping for the automobile industry.
Universal machines featuring up to 6,000 mm workpiece diameter.
Special machines for finishing by generation and profile grinding.
|
|
The gear hobbing center 160 is equipped with 8-axis NC control and offers high main and tool spindle speeds, which - in conjunction with a fast loading device - ensure that even shafts and pinions with a minimum number of teeth can be machined at high cutting speeds and correspondingly short cycle times.
The type 200 combines cutting edge technology with the highest degree of universality and flexibility in both machining and automation. It machines an extensive range of diameters and modules of pinions, gears, worms and worm gears.
The fully automated Type 300 Gear Hobbing Center features 9 activated axes and can machine gears up to module 4 with great flexibility. Its combination of slant bed design and closed-loop framework construction offers the highest degree of stability for both dry and wet machining.
The design of the gear hobbing center is based on that of the VSC series. The VSC 400 WF soft finish-machines gears by turning, gear hobbing and deburring.
|
|
|
Hobbing Machine is a vertical hobber capable of producing gears and shafts with an outside diameter as large as 130mm. The Genesis Hobber was designed as a totally new product incorporating the most modern features and capabilities required to today's gear production.
|
|
Drake GS:H (Gear System: Hobber) brings new levels of productivity to vertical hobbing of helical, spur, spline, worm ... straight, tapered or crown gears.
Drake's customized CNC programming cuts set-up time drastically, perfect for today's short-run environments.
|
|
Ideal design for gear applications for utility vehicles
Change-over friendly automatic clamping and loading equipment for the optimal handling of small and medium batch sizes
Fully enclosed machine work area
Backlash-free table drive with patented spur gear drive for high rpm
More than 500 sold machines at all reputable gear manufacturers
|
|
EMAG KOEPFER Gear Hobbing Machines
The machines combine cutting edge technology with the highest degree of flexibility in the machining of gears, pinions, worms and worm gears with up to 195 mm dia. / module 4.
The composite epoxy bed provides a static, dynamic and thermally stable base for the machine. Highly flexible, easily reset automation systems allow for even small component batches to be manufactured automatically.
|
|
Koepfer MZ120 - CNC gear hobbing and worm milling machine to produce spur gears, worm gears, bevel gears, worms and threads
Suitable for large and small quantities
Easy resetting from gear hobbing to worm milling
|
|
Koepfer MZ130 - CNC gear hobbing and worm milling machine to produce spur gears, worm gears, bevel gears, worms and threads
Suitable for large and small quantities
Easy resetting from gear hobbing to worm milling
|
|
The gear shaping machine program covers a range of up to 4.500 mm workpiece diameter and supplements the modular setup of the same modular concepts for gear hobbing and gear shaping.
All gear shaping machines are suitable for external and internal gears. CCP-process for technologically optimized cutting
|
|
The Grooving Machine Aryma GM usually is employed in connection with the Circular Shear Aryma to produce internal and external rings for spiral gaskets.
The Aryma GM was specially developed for the cold forming of grooves at the inside diameter of metallic rings for spiral gaskets.
|
|
|
|
Other machining machines 
