|
|
These are automatic shrink sleeve wrapping and shrink overwrapping machines with integral tunnels. This range of machines with various width dealing jaws can handle two types of wrap. One, a sleeve wrap with openings at the pack sides. Two, a totally enclosed wrap with the film shaped by a "forming shoe" into a tube around the product. These machines are built to extremely high quality standards and can be configured with a variety of collators suitable for handling cartons, bottles, cans and other products. And they can use LDPE, PP, PVC or other shrink films.
Standard Features:
- Intermittent motion at up to 25 packs per minute
- Fully automatic operation
- Options of mild or stainless steel construction
- Option of low level, side mounted film roll
- "In Line" (QSIL) or "Side Feed" (QSSF) machines
- Easy to operate
- Compact with integrated energy efficient shrink tunnel
- Minimum film usage
- Solid aluminum, constantly heated sealing jaw
- Fully interlocked guarding
|
|
The UNIBLOC range and the shrinking tunnels
Example of compact shrink bundling with the UNIBLOC range :
- Reduced floor space,
- Cold mechanical cutting,
- Multiple gathering possibilities of the packs,
- Choice of the products arrival.
The NORKET range
Example of modular bundling with the 4 or 6 sides NORKET range :
- Tailor-made solutions ,
- Cold mechanical cutting,
- Choice of the products arrival,
- Heating safety.
|
|
SVAGT
Modular design automatic in line sleeve wrapping machine to wrap with shrink film differente kinds of products in groups and piled in heights.
Automatic in line sleeve wrapper ULMA brand, model SVAGT, of modular design, to wrap with flat shrink film different kinds of products in groups and piled in heights.
The sleeve wrapping machines work with two flat rolls of film, cross sealed. Complete closing of the pack is not needed.
Standard equipment:
- Maximum product height: 350 mm.
- Productions up to 2.400 unitary products / h depending on product and film.
- Powered in feed belt, in line, with speed regulation for automatic loading of the product.
- Powered reel holders (top and bottom).
- Sealing and cutting with hot clamp with electronic regulation of temperature. Low maintenance of the sealing clamp.
|
|
Stretch film wrapping machine is suitable for tight, attractive see-through display package.
FW3461
- Horizontal type stretch film wrapping machine.
- Attachless infeed conveyor easy transfer of products.
- Stainless steel construction and cantilevered frame design model.
FW3462
- Stretch shrink wrapping machine for use with the new generation of stretch shrink film to provide fully sealed leak proof packages.
- Adopted box motion end sealer for close tight wrapping.
- Stainless steel construction and cantilevered frame design model.
|
|
Stretch film wrapping machine is suitable for tight, attractive see-through display package.
FW3461
- Horizontal type stretch film wrapping machine.
- Attachless infeed conveyor easy transfer of products.
- Stainless steel construction and cantilevered frame design model.
FW3462
- Stretch shrink wrapping machine for use with the new generation of stretch shrink film to provide fully sealed leak proof packages.
- Adopted box motion end sealer for close tight wrapping.
- Stainless steel construction and cantilevered frame design model.
FP40A
- The model FP40A stretch wrapping machine has a built-in device to center each tray and automatically feed in to the model FP40A.
- Built-in micro computer permits easy operation.
|
|
DB110 Bagging machine
DESCRIPTION
Compact machine to pack bottles into bags automatically
Width adjustable from 600 - 800mm, length adjustable from 200 - 700mm
ADVANTAGES
Flexible (packs all accumulating bottles)
Savings on packaging costs
Short return on investment
OTHER VERSIONS
Bagging machine for bottles: DB100, DB112, DB122
Bagging machine for containers: DB142
|
|
|
|
|
|
Polypack's CLEARPRINT machine now offers the option to add a completely integrated carrying handle called HandleWrap™. This groundbreaking technology uses a strip of high tensile film that is run inline with the bundle's shrink wrap. The HandleWrap™ film is fused to the bundle's shrink film during the shrink process, creating a strong carrying handle without using any corrugate!
Polypack's HandleWrap™ uses a completely different approach to creating a convenient carrying handle for retail packs. Polypack's HandleWrap™ is not to be confused with the tape carrying handles of the past. The HandleWrap™ film is run inline with the bundle's shrink film, so there is no need for secondary equipment, tapes, or tape applicators. HandleWrap™ fuses with the bundle's shrink film, which makes for an extremely strong carrying handle that can support the weight of heavy bundles. The HandleWrap™ remains completely inside the pack until it is used and there is no chance of it tearing off during stacking or use. Polypack's patented HandleWrap™ can use clear, colored, or random pattern printed film for the handle.
|
|
The B-90 Series are fully automatic shrink bundling systems with automatic product infeed conveyors feeding either from right or left of machine, micro switch product sensing, automatically operating pneumatic sealing heads, and automatic motorized product discharge conveyors.
Your product is fed onto the adjustable speed product infeed conveyor.
- Single Row Collating / 90 degree product turn: One line of product is pushed through the film at a 90 degree angle.
- Multi-Row Collating with Product Pusher: One line of product is collated one a row at a time and then is pushed through the film at a 90 degree angle.
- Multi-Lane Infeed Collating: One line of product is feed onto the infeed conveyor and then separated into multiple rows before it is pushed through the film at a 90 degree angle
Speeds of up to 18 packages per minute are achievable depending on product.
|
|
Meypack SW 60 M-25 Series
- Single roll system
- Multi shaft servo-motor system
- Compact, operator-friendly machine execution
- Simple pack formation change over
- Precise positioning of registered printed film
- Speed: 25 packs/min. or 50 packs/min. (two lanes)
Functions
- Film wrapping
servo driven film wrapping unit for precise positioning of the film.
- Servo driven cross feed pusher unit for space-saving, compact right angled layout.
- Film reel support
Film feed unit with good access for easy and quick film reel change.
|
|
L@SER is Dimac's new innovation to complete the bundling machine range.
The new L@ser series has an innovative design, guarantees high performance and a good reliability thanks to new components and a high resistance frame.
It was conceived to be easy to use and install with better machine parameter control through the touch screen operator panel.
The utmost attention was paid to the film welding and cutting phase by a height adjustable welder that provides the best performance with the various processed products.
Wrapped product is transferred to the highly insulated tunnel for perfect heat shrinking and consequent energy savings.
|
|
Applicator of advertizing band with anagram of the product.
Support of trazabilidad labels.
Stability of the light product load.
|
|
Sleeve Wrapping - Sleeve Flex
The sleeve wrapping technology consists of passing a load through a film curtain, which is then sealed forming a tight sleeve, which is subsequently shrunk.
Our Sleeve Wrapping Lines come in two different types; a Sleeve Flex followed by an Easy Flex , used for wrapping of appliances with large variations in length and width, and a Sleeve Flex followed by Vertical Shrink Columns, where the loads turn during shrinking while the shrink columns are stationary.
Capacity of our Sleeve Wrappers: 350+ loads/hour.
|
|
The Wraps UK ES60 manual two reel sleeve wrapping machine is the lowest cost method of producing a shrink wrap for transit purposes. The system consists of the ES60 sleeve wrapper and the M25.40T shrink tunnel. Each machine uses a 13 amp single phase electricity supply making it an extremely mobile wrapping solution.
Shrink wrapping for transit purposes uses Polythene shrink film, the lowest cost shrink wrapping film available. One reel of film is mounted at a high level and the other is mounted at a low level. The two reels are joined by the sealing head, forming a curtain of film through which the product is pushed.
|
|
|
|
|
|
Manual sleeve wrapper ULMA brand, model SVM, of modular design to wrap with flat shrink film a great range of individual products and collations.
The sleeve wrapping machines work with two flat rolls of film, cross sealed. Complete closing of the pack is not needed.
Standard equipment:
- Maximum product height: 350 mm.
- Productions up to 600 cycles /h depending on product and film.
- Stainless steel in feed table.
- Powered reel holders (top and bottom)
- Manual pushing with paddle to introduce the product into the sleeve wrapper.
- Sealing and cutting with hot clamp with electronic regulation of temperature. Low maintenance of the sealing clamp.
- Automatic cut and seal cycle when the paddle goes backwards.
- Safety system in the sealing clamp to protect the operator and/or the product.
- Pneumatic working of the sealing bar.
- Pneumatic presser over the exit table to hold the product during the cutting and sealing process.
- Stainless steel exit table with gravity rollers.
- Control panel of simple use for all machine functions.
|
|
If a manual sleeve wrapper is not fast enough to meet production requirements then the next step up in speed is the semi automatic sleeve sealer. Wraps UK supplies the PAF Easy semi automatic sleeve wrapper combination tunnel range for applications up to 10 products per minute.
With a semi automatic sleeve sealer the product is placed on the infeed by hand. Once the product, or collation of products, is positioned in front of the pneumatic infeed pusher, a button is pressed which starts the wrapping cycle. The product is pushed through the web of film and the sealing head then automatically cuts and seals the piece of film around the product.
|
|
|
|
|
|
SVS
Modular design semiautomatic sleeve wrapping machine to wrap with shrink film a great range of individual productos and groups.
Semiautomatic sleeve wrapper ULMA brand, model SVS 60x35, of modular design, to wrap with flat shrink film a great range of individual products and groups.
The sleeve wrapping machines work with two flat rolls of film, cross sealed. Complete closing of the pack is not needed.
Standard equipment:
- Maximum product height: 350 mm.
- Productions up to 600 cycles / h depending on product and film.
- Stainless steel in feed table.
- Powered reel holders (top and bottom).
- Manual placement of products over the in feed table. Pneumatic cylinder with paddle activated by buttons.
- Pneumatic seal.
- Sealing and cutting with hot clamp with electronic regulation of temperature. Low maintenance of the sealing clamp.
- Automatic cut and seal cycle when the paddle goes backwards.
- Safety system in the sealing clamp to protect the operator and/or the product.
- Pneumatic presser over the exit table to hold the product during the cutting and sealing process.
* Stainless steel exit table with gravity rollers.
* Control panel of simple use for all machine functions.
|
|
|
|
|
|
The ECOFARD line is a complete range of semiautomatic and automatic sleeve-wrappers equipped with semiautomatic/automatic feeding to make multipacks of different size of various products (bottles, vases, jars, pots, cans, phials, cases etc) and/or to protect boxes integrating and/or replacing the use of carton boxes at end-of-line with great management advantages. Two different versions are available for each model: compact (MB) where the tunnel is connected with the sealing area, and sealer-plus-tunnel (BB) where the sealing area is independent from the tunnel.
The machine works in a very simple way: a pneumatic pusher drives the products from the loading area towards the sealing area. Then a transversal sealing-bar (that has a pneumatic movement and temperature is electronically controlled) cuts and seals the film. At this point the product enters the tunnel for shrinking. Ideal for medium-high outputs.
Visit our website for the DIFFERENT manual, semiautomatic, automatic MODELS of the ECOPACK and ECOFARD lines.
Possibility to order customized models.
Machines manufactured according to CE rules
|
|
PE Heat Shrink film Packing Machine
Packing with PE heat-shrink film
Automatic machine to wrap the coil with a pre-stretched heat-shrink film. The system assures a full genuine wrapping and allows to pull the quantity of pipe needed out of the coil centre as well as the regular stacking. Compared with more common packing solutions this assures a quick return on investment.
|
|
Stretch- Shrink Wrapping Machine F40
MAIN FEATURES
Reliability
Its original functioning criterion, along with its simple manufacturing concepts, are particularly appreciated by its users. The F 40 adopts the most up-to-date manufacturing technologies.
Accuracy in bundling
The film is unwound by two motorized reels, which keep a steady tension and can be adjusted according to the customers need. The product is bundled without being pushed against the film.
Easy use
Setting of main data (e.g. size, dimensions and speed) is performed through an operator's functional display . Easy and fast size changeover.
Packaging materials
The F 40 can work polyethylene, stretchable film either for banding or shrinking.
Types of packaging
It is suitable to carry out various packaging solutions - stretch-banded or overwrapped and shrunk - as well as a wide range of bundle patterns.
|
|
The meurer CM/HB-B high-speed sleeve wrapper is a combination of a stretch bander and a shrink tunnel and packages single products as well as packs in a tight-fitting sleeve package with lateral film overlapping. Due to the robust mechanics it is especially designed for the wet areas and is particularly suitable for the food and beverage industry.
- Single or double-laned infeed
- Product-specific infeed and grouping systems
- Quick format change
- Low noise operation
- Touch panel with clear operator instructions
- Easy access due to an open balcony construction
- 80 packs/min. in case of an operation on a single lane, 140 packs/min. in case of an operation on two lanes
- Continuous Motion sealing system
- Also available in stainless steel construction
- Option available for lateral film unwinding for an easy film reel change-over
|
|
OYSTAR A+F multi-pack shrink wrappers are the perfect answer to the growing demand for products which are to be packed in shrink wrapped multi-packs. OYSTAR A F manufactures a range of machines which enable the customer to choose the right machine, for the specific type of product, at the required output.
The modular machine design concept, combined with an infeed system tailored specifically to the product, ensures reliable performance and maximum efficiency.
|
|
MIMI UNIBLOCK P50
AUTOMATIC SHRINK WRAPPER WITH COLLATION UNIT AND STACKER FOR SOFT BAGS
This automatic shrink sleeve wrapping machine with collating unit and shrink tunnel is equipped with a stacker, which allows the collation of the product. It is capable of applying shrinkable film to stacked flexible bags containing coffee, rice, pasta, flour, feedstuff etc.
- Suitable for sleeve sealed and auto sealed film package
- Output: up to 40 flexible bags/min according to the product dimensions.
|
|
MIMI UNIBLOCK 700 NO
FULLY AUTOMATIC SHRINK SLEEVE WRAPPING MACHINE with powered side in-feed belt and pusher
This automatic shrink sleeve wrapping machine is equipped with a shrink tunnel and a powered side in-feed belt and has a pneumatic pusher capable of wrapping single products like sleeves, boxes, etc.
- Versions equipped with 700 mm – 900 mm – 1300 mm – 1600 mm sealing bars
- Suitable for sleeve sealed package and auto sealed film package.
- Output: up to 15 packages/min according to the product dimensions and film thickness.
|
|
CMS Series
This bundling system is a continuous motion shrink wrapper designed for higher speed applications. Perfect for products longer than 4". The seal bar module moves with the conveyor so that products continuously move through the system.
|
|
The new series of monoblock semi-automatic and automatic shrinkwrappers with sealing bar ßetaPack are extremely versatile: they can pack various products, such as glass and PET bottles, cans, boxes, trays, jars, cartons of different sizes in a wide range of pack collations. They can be used in several industry segments, such as beverages, food, chemicals, wine and spirits, cosmetics, detergents, wood, textile, graphic etc.
The ßetaPack series allows SMIPACK to meet a wide variety of customers demands and to ensure a very good quality/price ratio.
|
|
The wrapping/binding machines mod. AT01, are used to wrap (bind) palletized products with heat shrinking film. The machine wraps, welds and cuts the heat shrinking film, thus covering the packs as they pass through it, without the need of an operator.
The machine may also be added onto existing conveyor lines. The AT01 model automatically changes the coils to continuously wrap packs with different heights thus reducing film waste. It consists of 3 mobile winding groups with selection according to the packs' height.
An upper piegafalde, which serves to arrange the film so as to obtain an optimal heat shrinking even on the upper side, is available upon request.
|
|
Easy-open pack
Coupled to the sealing bar, this system perforates the film along each side of the pack seal in order to create a tear-off strip, without reducing the speed.
90° film reel holder
This device enables quick and ergonomic changeovers by the operator.
Sealing bar
* The traveling sealing bar enables the continuous flow of products.
* The automatic top film feeding system guarantees product stability when the sealing bar descends.
* No transfer zones: single product conveyor from machine infeed to outfeed
|
|
PRODUCT COLLATION
Starwheel (AET)
· Single lane dividing system.
· Compact machine.
· Avoids problem of pressure and product accumulation.
· Protects products and labels.
· Fast and easy changeover size.
Pin-gating selection (SDI)
· Rotary continuous motion.
· Unstable products.
· Fast and easy changeover size by changing the pin-gating unit.
Pneumatic selection channels (CLP)
· Easy adjustment.
· Economic.
Registered printed films
Device allowing use of registered printed film:
. Vehicle for advertising.
· Pack decoration.
· Means of promotion.
:FLATBOARD (PC)
System to set the products on a flatboard before the film application:
· Increases pallet stability, no extra support needed on pallett
|
|
|
|
|
|
TANGO machines produce bulls-eye wraps using both clear and printed film. These single roll, intermittent motion machines can wrap up to 20 bundles per minute and offer an array of infeed options including an inline infeed, an inline flood infeed and a side infeed. The TANGO was designed using a modular concept, and the infeeds can be changed without tools in a matter of minutes. The TANGO comes pre-programmed for the various infeeds and the electrical enclosure communicates with the infeeds via plugs, which allows for quick and easy changing of the infeed modules.
ADVANTAGES
- Low-cost print registration wrapper starting at $75,000
- Multiple infeed modules available (Inline, Inline Flood, & Side Infeed)
- Swappable infeeds with pre-programmed control panel
- Runs both clear and printed film down to 1 mil
- Uses a single roll of film to wrap products with a lap seal (NO SEAL BAR)
- High efficiency shrink tunnel conserves heat and reduces energy consumption
- Stainless steel mesh conveyor cools naturally and effectively with no sticking
|
|
|
|
Sleeve wrapping machines
