|
|
- Standard workshop model with stop screw
- Assembly slider model
- 4-way measurement
- Made of hardened alloyed stainless steel
- Chromed scale with engraved graduations
- Measuring surface is micro-lapped
- Packed in plastic box
|
|
Code: Art. 1/34
Vernier calipers for big dimensions
Monoblock caliper in hardened stainless steel. Satin-chromed readout scale. Etched, precision graduation, easy to read and long-lasting. Raised slider for easy movement. Slider locking screw with micrometric adjustment and lapped contact surfaces.
Slide stop at beam end. Serial number
|
|
Calipers are the most popular length measuring instruments used worldwide. Owing to their
simple construction, ease of handling and quick operation, they are the favourites in dimensional
measurement. The wide variety of forms and shapes available with exclusive measuring faces
make them the universal hande-held tools.
|
|
- Electronic Calipers - Series No. 797B
- Electronic Calipers - Series No. 799A
- Dial Calipers - Series No. 120, 120M
- Dial Slide Calipers - Series No. 1202
- Offset Dial Caliper - Series No. 120J
- Center Distance Attachment
- Dial Calipers with long nib jaws - Series No. 120B, 120MB
- Master Vernier Calipers - Series No. 123, 123M, 123EM
- Vernier Caliper - No. 125 Series
- Gear Tooth Vernier Calipers - Series Nos. 456, 456M
- Special Master Dial Indicator Vernier Calipers - Series No. 1223, 1223M
- Stainless Steel Pocket Slide Calipers - Series No. 1025, 1025ME
- Stainless Steel Pocket Slide Caliper / Circumference Gage - Series No. 424
|
|
The GapGun handheld laser gauge is a quality assurance
tool that checks product build geometry in production,
maintenance and repair facilities.
Our GapGun customers are spread across the globe from the Far East through Europe to the USA, and include the worlds leading aerospace and automotive companies (see logos).
Typical applications include:
Chamfer, radius and Break Sharp Edge measurement
Automotive painted and Body in White (BIW)
Aerospace panels, doors and hatches.
Interiors, dashboards and trim
Proven to meet or exceed QS9000-MSA for a wide variety of measurement types, the GapGun will boost your measurement capability and data collection rates.
GapGun - Save Time, Save Money, Increase Accuracy
|
|
Features:
- Hardened and ground steel plunger, and rest plate
- Masters on any flat service, no special master required
- 3 Blade contact insures accurate repeatable readings
- .001"/0.02mm dial indicator, standard
- Optional digital indicator -.0002" resolution on 90° or .0004" resolution on 127° model
- Inch or metric indicators available
- Includes fitted storage box
|
|
|
|
|
|
General
Measuring surface and hardened steel taper
Scale graduation of indicators: 0.01 mm
Calibration at factory or via setting master
Special designs on request
Internal taper gauge (IKT)
Direct gauging of major diameter of internal tapers or tapered slots
Models with 60°, 90° and 127° taper
Application range: Ø 0.5 mm to 120 mm
Measuring range: 11.5 mm for 60° taper/19.5 mm for 90° and 127° taper
The low-cost Alternative: The Internal Taper Gauge IKT-OS
The term OS is an abbreviation which means "without stop bar". By the omission of the bar, the alternative internal taper gauge can be manufactured at a lower cost which in turn renders a favourable sales price.
The IKT-OS is implemented to measure the largest diameter of internal tapers or tapered grooves. In contrast to its brother product, the IKT-OS requires a contact surface and cannot be used with thin-walled work pieces.
Standard setting masters can be utilised, as well as the corresponding dial indicator or digital dial indicator IKT-MU1086W.
External taper gauge (AKT)
Direct gauging of minor diameter of external taper
Models with 60°, 90° and 127° plungers
Application range: Ø 5 mm to 120 mm
Measuring range: 11 mm for 60° plunger/19.5 mm for 90° and 127° plunger (except for size 1)
Chamfer gauge (KT/KT-B)
Direct gauging of 45° chamfers on rectangular and cylindrical pieces, even bores or slots
Measuring range: chamfers up to 7 mm (radii 1 mm up to 9.5 mm via conversion)
Chamfers in bores from approx. Ø 28 mm
|
|
Tubular Type Depth Micrometer: This spindle integral-type enables stable measurement.
Interchangeable Rod Type Depth Micrometer: Allows wide-range measurement with a single unit by replacing interchangeable rods.
Depth Microchecker: 2 models with a maximum measuring range of 150 mm and 300 mm.
|
|
Large sizes in mechanical engineering mean dimensions in excess of 500 mm.
Besides various measurement procedures like those that apply large internal or external
micrometers with two-point contact, tape rules (wrapping round the outside diameter),
V-bases, rotating measuring disks (rolling-contact) and optical systems (triangulation
with theodolites), resort is often to make use of simple testing means like fixed gauges
(inside calliper gauges), gauge blocks combinations or telescopic adjustable gauges.
|
|
MaraMeter Depth Gage 837
- Large cross beam
- Mounting clamp for a dial / digital indicator
- Application range (in conjunction with anvils 837v: 0-100 mm)
|
|
Starrett Depth Gages are available in many variations, with a choice of electronic, dial, vernier, precision rule and indicator based readouts, and offer a wide variety of ranges. Between our standard products and the Special Gaging that we can work with you to develop, Starrett covers all of your depth measurement requirements.
The new 5004 Series Depth Gages are ideal for large parts. Four sizes
are offered with the largest able to measure depths to 24"/600mm.
Three movable bridge attachments, the largest with a capacity of 24"/600mm, provide additional large part measurement capability These depth gages are made from hardened stainless steel and are coolant resistant.
|
|
List of Dial Indicator: List of functions implemented in various models of dial indicators.
Compact type Dial Indicator: Compact type with a maximum scale frame diameter of 41 mm.
Dial Indicator 2046S: 10 mm-stroke, regular dial indicator with a minimum reading of 1/100 mm.
Large Dial Type Digimatic Indicaor: Large dial type with a measuring range of 20 mm or more.
|
|
- Satin-chromed body
- With Tungsten carbide measuring tip
- With double dial indicator for measuring mm stroke
- Shockproof
- Micron versions are jewelled
- Adjustable scale with stop screw
- Some models offer tolerance indicators, see picture
- Can be supplied with or without "lug" on back plate
- 400-03 features remote operation control by cable plunger
- Packed in foam box
|
|
|
Shockproof and waterproof dial indicator. Insulation against water and dust in the most delicate areas. Rubber casing to protect the spindle and rack. The upper part of the dial indicator is insulated by a protective cap. The front and back of the dial face are protected by seals while the special shape of the locking ring ensures maximum protection. Rotating bezel with tolerance markers. Manufactured as per DIN 878. Supplied in case.
|
|
Provide the advantages of mechanics combined with electronics – All in one.
• Inductive measuring system,
patented.
• Analogue and numerical
indication.
• Numerical interval to
0,01/0,001 mm.
• Selectable scale division :
10, 20, 50 µm/1, 2, 5 µm.
• Water and coolant resistant
(IP65).
• Metric/inch conversion.
• RS 232 data output combined
with external power supply.
• Displayed measuring modes
(NOR/MIN/MAX/MAX-MIN).
• Automatic shut-down.
• Compatible with all TESATAST
accessories.
|
|
|
|
|
|
Dial Indicators Group 4
Features:
- High amplification movement permits:
Graduations as fine as .00002"
Improved readability and minimized judgement error
Performance comparable to more expensive gaging methods
Convenient portability - no external connection required
Interchangeability - can be used in the same environment as any other mechanical dial indicator
Simplified service - complete movement is easly removed from the case for cleaning or direct replacement at low cost
- Lever principle of amplification - minimizes effect of spindle sideshake. Linearity and repeatability maintained through millions os cycles
- 3-5/8" bezel - conforms to ANSI/AGD standards
- Adjustable gaging force - easily adjustable from 2 to 5 oz. by externally accessible screw
- External zero adjustment knob - makes possible the advantage of adjusting dial indicator hand to zero rather than rotating bezel to 'zero' hand
- Optional lifting lever or cable release. Use lifting lever only when dial indicator is back mounted. Cable release may be used when dial indicator is back or stem mounted and enhances stability of gaging setup
|
|
MarCator Small Dial Indicator 803 A Standard version
- For application in cramped conditions
- High precision gears and pinions
- Lifter protection cap on the top of the measuring spindle
|
|
|
Starrett offers an exceptionally broad range of indicators including test and back-plunger models, electronic and dial AGD Indicators, holders and accessories, and Special Function Dial Gages. Starrett indicators are also broadly used as part of custom solution applications.
|
|
General description
MU-1 m/MU-01Z
Scale graduation: 0.001mm or 0.0001"
Travel: 1 mm/0.04"
Accuracy according to DIATEST standard
Various measuring pressures
MU-10 m/MU-1Z
Scale graduation: 0.01 mm or 0.001"
Travel: 10 mm/0.5"
Accuracy according to DIN 878 or DIATEST standard
Various measuring pressures
Micro comparator (F-1000)
Scale graduation: 0.001 mm
Measuring range: ± 0.05 mm
Accuracy according to DIN 879
Various measuring pressures
MDU-125
Measuring range: 12.5 mm or 0,5"
Resolution: 0.01 mm/0.001 mm (0.0005"/0.00005")
LCD digital display
Can be switched from mm to inch
Data output: opto-RS232
Model MDU-A with traffic light display and min/max function
Model MDU-M with min/max function (only for split-ball and plunger probes)
Analodig (ANA)
Measuring range: ± 0.2 mm digital/± 0.05 mm analogue
Resolution: 0,001 mm
Optional with output similar to RS232 and min/max-function
|
|
|
|
|
|
Designed to accurately perform a wide variety of measuring tasks, the new Bowers UniCal multi-purpose digital caliper range is available in 300mm, 600mm and 1000mm capacities, with larger versions available upon request. This revolutionary new technology boasts tough, lightweight reinforced beams, giving it incredible strength and weightlessness. Advanced features include a large easy to read digital display, preset facility, constant measuring force, metric inch conversion and RS 232 data output port.
Features:
* Ranges : 0 - 300, 0 - 600, 0 - 1000 (larger versions available upon request)
* Preset facility for internal / external measurement
* Constant measuring force
* Hold feature, freezes display for later viewing
* Incremental floating zero
* Metric/Inch switchable
* Resolution : 0.01 mm / 0.0005"
* MIN/MAX function
* Tolerance indicators
* 5mm Ø mounting bores on the top and underneath the gauge
* Adapters available to fit Bowers Universal Gauge accessories (see pages 32-34)
* Wide range of measuring contacts available
* Large easy to read LCD display, height of digits 8.5mm
* RS 232 output
* Water resistant
|
|
IP54 Water Resistand Digitronic Caliper - WR Series
Standard: DIN 862
Features
Water and dust resistant to IP54 specification
Functions: mm/inch conversion, on/off, zero setting
Patented ceramic capacitive sensor
Large LCD display
CR2032 battery
|
|
Code: Art. 18/54
Digital caliper with knife points for external measurements
Digital caliper in hardened stainless steel. 5 figure liquid crystal display and minus sign. State-of-the-art electronics. mm/inch conversion. Set to zero in any position. RS232C output to printer port. Micrometric adjustment screw. Slider locking screw. Knife points for external measurements. Battery powered. Serial number.
|
|
Patented measuring system – TESA magna µ system
New electronic caliper – The highest degree of protection ever achieved
with hand-held tools of this type – Totally immune to the penetration
of liquids and particles of metal.
Magnetic measuring system – a TESA’s technology guaranteeing full
reliability and accuracy, even in the toughest conditions of use –
SWISS MADE.
|
|
|
|
|
|
A refinement in calipers is the replacement of the analog dial with an electronic digital display on which the reading is displayed. Some digital calipers can be switched between metric and inch units. All provide for zeroing the display at any point along the slide, allowing the same sort of differential measurements as with the dial caliper but without the need to read numbers that may be upside down. Digital calipers may contain some sort of "reading hold" feature, allowing the reading of dimensions even in awkward locations where the display cannot be seen.
Even with all of these benefits, digital calipers have by no means replaced the dial caliper. Digital calipers typically do not have the beam structure of a dial or vernier caliper and therefore do not have the repeatability or accuracy to an amateur user.
Digital calipers offer a serial data output. Measurements can be taken and instantly stored in a spreadsheet or similar piece of software, significantly decreasing the time taken to take and record a series of measurements. Like dial calipers, the slide of a digital caliper can usually be locked using a lever or thumb-screw. Both dial and digital calipers can be used with accessories that extend their usefulness.
|
|
Digital Calipers
Use for inside and outside length measuring and step measuring using the four caliper jaws.
Depth measurement is provided by the slide that extends from the scale.
* Inch / metric
* 4-way measurement
* Stainless steel
* Reading 0.01mm-0.001"
* Spare battery included
* Supplied in case
|
|
MarCal Waterproof Digital Caliper 16 EW according to IP67
Accurate measurements under extreme conditions!
- Protected against water, oil, dust according to Protection Class IP67
- Inductive waterproof measuring system FPS (Fluid Protected measuring System)
- Reference-Lock-Function secures the zero position and prevents operation errors
- Chemical resistant material Ultradur for housing and buttons
|
|
1300 - 1320 Digital calipers
1300
Technical caracteristics
To DIN 862.
- Accuracy 0.01 mm.
- Resistant to water and cutting oil - IP 65.
- IP 6x = No dust penetration.
- IPx5 = Protected against water jets from any direction during 3 minutes.
- Ground stainless steel mechanism.
- Reading rule with patented inductive measuring system.
- Flat depth gauge.
- 6 mm LCD display.
- Floating zero.
- mm/inch conversion.
- Automatic shutoff.
- Battery life approximately 3,500 hours
- Supplied in a case with a certificate of conformity.
- RS 232 port.
|
|
Precision Made in Switzerland.
- Non-metallic high-tech material with 60% fibre-glass content, extreme rigidity, non-corrosive, non-magnetic, minimum thermal conductivity, electrically insulating and partially ESD tested. Resistant to chemicals (organic solvents, alkalis)
- Particularly suitable for measurements of high-quality and delicate objects. The special product properties open up further application areas not covered by metallic callipers
- Extremely wear-resistant measuring jaws for accurate measurements in the long-term, Swiss-made precision.
|
|
General Purpose Digital Contact Sensor
• Tough, Rugged: IP-67 Enclosure Rating
• Error-free Design W/ Co-transformer Method
• Total Cost Reduction W/ Simplified Set-up
• Easy and Simple Set-up
• One-push Zero Point Adjustment
• Data Communication with 10 Amplifiers
Tough and rugged general purpose digital contact sensor with push button calibration.
|
|
|
|
Metrology equipment
