|
|
| Products 91 to 120 of 274 |
The Digimar Height Measuring Instruments are ideal partner for the workshop, on the production line or in the inspection room, they are Simple to use, Fast and Accurate.
Mahr offers a complete product range. From the simpliest Height and Scribing Measuring Instruments to the high end motorized measuring station with 2D measuring functions.
Digimar 817 CLM Quick Height
The new Height Measuring Instrument Digimar 817 CLM with the innovative Quick Mode. Highly accurate rapid measurements, a wide range of measuring and evaluation possiblities and excellent operator comfort.
- Revolutionary, simple and rapid measurement with the Quick Mode
- Ergonomic operating and display unit
- Versatile application for variable measurement tasks
- Wide range of statistical evaluations are possible
- Available in 3 sizes and 2 operating display units
|
|
Starrett Height Gages are available in a variety of styles, sizes, readouts and accuracies. Accuracies are available to .000050" on our Digi-Chek® Series. Standard height measurements are available to 85"
Electronic Height Gages
No. 3752 Series
The 3752 Electronic Height Gage is a full featured, versatile and economic
solution for most height measurement applications.
All measuring information from these tools can be entered directly into Starrett Data Collection Systems for analysis, data collection and hard copy documentation.
|
|
|
|
|
|
Profile Projectors Horizontal Bench Top R14 Profile Projector
Standard features:
* ½ Micron X, Y measuring resolution
* 340mm (14") screen with 90 degree crosslines and chart clips
* Profile illumination with halogen lamp and green filter
* Lens magnification choice: x10, x20, x25, x50, x100
* Surface illumination (fibre optic)
* Helix adjustment ±7° of light source for accurate thread form projection
* Cast iron workstage with machined slot for holding accessories
* Workstage measuring range of 175mm (7") x 100mm (4")
* Digital angle measurement to 1 minute of arc
Profile Projectors – Horizontal Bench Top R400 Profile Projector
Standard features:
* ½ micron X, Y measuring resolution
* 400mm (16") screen with 90 degree crosslines and chart clips
* Profile illumination with halogen lamp and green filter
* Surface illumination (fibre optic)
* Helix adjustment of light source ±7° for accurate thread form projection
* Cast iron workstage with two machined slots for holding accessories
* Workstage measuring range of 300mm (12") x 150mm (6")
* Digital angle measurement to 1 minute of arc
* Digital clock function
|
|
|
|
|
|
General
Suitable for use with DIATEST bore gauges (e.g. split-ball probes) for serial measuring of small parts
Also suitable in connection with special applications, favoured for use together with DIATEST floating holders
Checking stand MST-58
Measuring stroke adjustable from 0 to 33 mm/1.3"
Platen: Ø 58 mm/2.3"
Top of stand continuously adjustable
Maximum height of work-piece including gauge: 140 mm/5.5"
Accessories: clamp-on-vee attachment for positioning of work-piece
Universal stand MST-102
Measuring stroke adjustable from 0 to 130 mm/5.1" with stop
Size of platen: 100 mm x 100 mm/4" x 4" (larger platen available in standard programme)
Different jib arms to hold measuring system
Extensive range of accessories in standard programme
Mini fixture KM
Especially suitable for measuring small work-pieces in combination with BMD plugs
Optimal position due to possibility for adjustments and accessories,
model as gauging station with several mini fixtures side-by-side.
Suitable for multi-plane plugs
|
|
The Bowers XT Holematic bore gauge incorporates an ergonomic pistol grip handle with an advanced trigger action, giving the user the advantages of both speed and accuracy of operation with a constantly applied measuring pressure. The clear digital display, superior electronics and application range of 2 to 300 mm ensures ease of use and assured accuracy.
The XT Holematic pistol grip range of bore gauges can be supplied as individual instruments or in complete sets. All XT instruments give the user the advantage of extended measuring travel with fixed anvils and UKAS certification of both measuring head and setting ring as standard.
|
|
|
|
|
|
Prompted by demand from their global network of agents and distributors, Bowers Metrology has announced the launch of a major new addition to its best selling XT Xtreme Bore Gauging range. Complementing the company’s popular pistol-grip and internal-micrometer models, the robust new XT Lever range is perfect for vertical bore measurement, providing accurate and repeatable bore gauging under inspection department or shop-floor conditions.
Aiding ease of use, Bowers’ new XT Lever bore gauges have a simple ergonomic action and can be fitted with a wide variety of analogue and digital indicators or even transducer probes. For use within hostile measuring environments, such as in close proximity to Machine Tools, Bowers flexible new range can be provided with IP 65 rated digital indicators, rendering them resistant to coolant, water and airborne particles. A ‘wireless’ gauge module is also available, enabling cable free communication with remote data collectors, computers etc.
The cost-effective new range of XT Lever bore gauges boast hardwearing extended travel carbide measuring anvils and are able to measure diameters up to 300mm. Bowers is also able to manufacture affordable ‘one-off’ XT Lever instruments to cater for a wide range of other problematic, internal measuring applications, such as threads, grooves, splines, etc.
|
|
Tubular Inside Micrometer:
- Standard rod-type micrometer
- Measuring range: 50 to 1000 mm with various models
Borematic Holtest: Allows stable measurement of inside diameters with three contact points.
Holtest: Allows stable measurement of small-hole inside diameters with two or three contact points.
|
|
Internal measuring of bores is more demanding than external measurement of workpieces. Not
only the tight tolerances given for the measuring job must be respected, but also the measuring
components that have a direct influence on the uncertainty of measurement must be designed
in such a way that they can enter into the bore to be checked.
|
|
Can be used to measure through holes, blind holes and centering shoulders
Measuring spindle hardened throughout and ground
Self-centering measuring head consists of 3 laterally positioned anvils, each are offset at intervals placed of 120°
|
|
The Bowers Checkmatic is a universal comparator gauge with a built in multifunctional digital display. This versatile gauge can be configured in a multitude of ways facilitating the rapid, accurate, internal or external gauging of both simple and complex components.
A comprehensive range of accesories is available for the Bowers Checkmatic, alternatively special accessories can be designed for more specialised applications.
|
|
The MCV-2002 “Two interferometers operating at the same time” utilizes a dual beam laser head module to accomplish simultaneous linear and angular (pitch or yaw, straightness, flatness) calibration of axes on machine tools, CMMs, or X-Y tables as well as surface plates. The software enables the operator to automatically collect linear and angular positions simultaneously or angular data on the fly in accordance with various industry standards. Material temperature, air temperature and air pressure variations are automatically compensated. linear measurement range of 33-feet (10-m) with 1 microinch (10nm) resolution, and an angular measurement range of 16-feet (5-m) with 0.2-arcsec angular resolution. Optional ranges up to 200-feet (60-m) linear and 100-feet (30-m) angular are also available upon request..
|
|
The ML10 Gold Standard laser represents the ultimate in calibration for machine tools, co-ordinate measuring machines (CMMs) and other position and motion critical systems. In combination with the extremely accurate EC10 environmental compensation unit, the system boasts ±0.7 ppm linear measurement accuracy.
The ML10 Gold Standard system can improve performance through targeted maintenance and can correct linear positioning errors using error compensation.
|
|
Versatile system for geometrical measurements. Thoroughly proven reliability and user-friendly design make it easy for you to measure almost anything. Simply add laser transmitters and other accessories to suit your purposes.
Typical applications: Straightness, flatness, squareness, parallelism and spindle direction in machine tools, mechanical constructions, etc.
|
|
|
|
|
|
ACCUSCAN 1000 - Intelligent Diameter Measurement
The AccuScan 1000 family of modular gauges is the latest generation of laser
micrometers from the inventors of the laser micrometer. The AccuScan 1000 series has integrated measurement and communications capabilities while maintaining the accuracy and reliability youíve come to expect from Beta LaserMike. Due to in-head Digital Signal Processing, higher scan rates, Fieldbus connectivity and enhance measurement algorithms, the AccuScan 1000 series can go where no laser micrometer has gone before. With a range of models covering dimensions up to 330 mm, the AccuScan 1000 brings precision measurement to your process.
Other systems (Accuscan 5000) are proposed that feature dual axis measurements for ovality, faster measurements for dedicated and continuous applications (Cable, Tube extrusion, ...).
Features :
* (depending on models) measurements from 0.36mm to 330mm
* accuracy from 1 to 20µm
* 500 measurements/second (1000m/sec optional)
* communication output: RS232, analog (Profibus, Devicenet optional)
Benefits:
1- High accuracy for industrial applications
2- Immune to moisture, dirts and product movements
3- Flexibility & easiness of integration
|
|
|
|
|
|
ACCUSCAN 5000 - Diameter & Ovality Measurement for Tubes & Cables
AccuScan systems from Beta LaserMike provide on-line precision measurements of the diameter and ovality of cables. Using laser scanning technology, AccuScan systems are able to perform diameter measurements in an intelligent gauge head during production and communicate those measurements to a host system or controller.
The AccuScan 5000 series gauges are dual planer laser scanners that measure both diameter and ovality.
Features :
* (depending on models) measurements of diameter & ovality from 0.1mm to 175mm
* accuracy from 0.5 to 20µm
* 1200 measurements/second (500m/sec on the 175mm gauge)
* window of measurement is always much bigger than product to measure (no problems with product movements)
* communication output: RS232, (analog, Profibus, Devicenet, CanOpen optional)
Benefits:
1- relaiability into industrial applications (cable & tube manufacturers)
2- accuracy in line with robustness of the device
3- flexibility of communications for easy integration
4- User-friendliness (switch on & measure, optional display)
|
|
|
|
|
|
NON-CONTACT MEASUREMENT:
LAP METIS laser sensors measure cross-section and gap without touching the surface. Mechanical micrometers, that may scratch the material, are no longer necessary. There is no wear or tear, neither on the object nor on the sensor. No operator influence affects the measurement.
FAST MEASUREMENT:
Laser scan micrometers may check 100% in the production line. At 800 values per second or even 1600 values per second. No more time consuming samples and offline checks. Instead of momentary images you get errors or tendencies displayed during production, enabeling you to react before crop is produced.
PRECISE MEASUREMENT:
LAP METIS measure at repeatabilities of 2 µm to 8 µm (depending on model) due to calibration and linearisation for every single mirror of the rotating prism. Transparent material can be measured as well as shiny metal or soft and sticky rubber.
SYNCHRONIZED MEASUREMENT:
Sensors are synchronized in multi-axes measurement. Even at high production speeds, there is no mismatch or offset between measurement values in transport direction.
FLEXIBLE MEASUREMENT:
LAP METIS measure precisely up to 10 edges (transitions object - space or space - object). Multi-axes systems also measure non-round profiles as square or polygonal profiles.
|
|
The optoCONTROL 1200 is based on the principle of light quantity measurement. The complete control electronics is inside the receiver and no additional controller is necessary.
High dynamic applications can be measured due to the frequency response of 100 kHz.
|
|
- High-speed linear CCD and telecentric optical system
- 2400 samples/second high-speed sampling
- Repeatability of ±0.06µm
- Maintenance - free LED emitter and design (no laser diode or motor)
- High performance controller with statistical analysis
- Controller with target viewer available for easy setup
|
|
Laser Scan Micrometer LSM-902/6900:
- A high-accuracy type that has attained a linearity of /-0.5 um within the measuring range of 1 to 25 mm
- Resolution: 0.01 to 10 um, Repeatability: /-0.05 um
- For detailed information, leaflet is available on request.
Laser Scan Micrometer LSM-9506:
- A measuring unit/display unit integrated type that assures a linearity of /-2.5 um within the measuring range of 0.5 to 60 mm.
- Resolution: 0.05 to 100 um, Repeatability: /-0.6 um
- For detailed information, leaflet is available on request.
Laser Scan Micrometer LSM-506H:
- A universal 60 mm type that assures a linearity of /-3 um within the measuring range of 1 to 60 mm
- Resolution: 0.05 to 100 um, Repetability: /-0.5 um
- For detailed information, leaflet is available on request.
|
|
Developed to measure both internal and external diameters and lengths, the gauge’s aluminium extrusion beam gives it a rigid, yet lightweight quality – making it ideal for shop-floor environments. The simple release of a locking thumb screw enables the gauge’s measuring direction to be changed easily and quickly.
The four gauges in the Intex range have been designed to measure components from 200mm up to 1m long; however extended lengths are available on request.
Features:
* Lightweight and rigid - typically weighing less than 2kg
* Internal and external measurement
* 2mm travel on moving contacts
* Adjustable fixed contacts with a range of adjustment up to 250mm
* Digital or mechanical readout display
* Hardened steel wear pads locate gauge on to the component aiding accuracy, repeatability and prolonging the life of the instrument
|
|
Incremental length gauges from HEIDENHAIN offer high accuracy over long measuring ranges. These sturdily made gauges are available in application-oriented versions.
They have a wide range of applications in production metrology, in multipoint inspection stations, measuring equipment monitoring, and as position measuring devices.
|
|
Incremental Length Gauge
- for multipoint measuring applications
- stroke length 30 mm
- compact version
- mounting clamping shaft sleeve
- pneumatic plunger actuation option
- sealing bellows option
|
|
Using LVDT technology, Trans-Tek manufacturers three different lines of Gaging Transducers capable of measuring up to 20 inches. Gaging transducers are often selected over free-unguided LVDTs when a hard connection cannot be made to the moving object. All units consist of a spring-loaded shaft guided through a phosphorous bronze, leaded bearing. A hardened steel contact tip touches the object to be measured.
Click on the Product Line most closely matching your requirements:
Series 310-320 AC Gaging: 0.5 to 20 inch stroke, 0.875 OD, connector term.
Series 330 AC Gaging: 0.01 to 2.0 inch stroke; 0.375 OD, cable term.
Series 350 DC Gaging: 0.10 to 6.0 inch stroke; various ODs and terminations
|
|
GS-1000 is a long range contact type linear gauge sensor which has a linear type displacement converter and converts spindle displacement directly into electric signals.
The adoption of ball spline bearings in the spindle has resulted in increased torsional rigidity (10 times as much as our conventional one) and of durability (practical durability of more than 10 million times) of the spindle.
The sensor is suitable for use in dangerous places and where measured values cannot be directly observed and for being incorporated in machines.
Features
- Long range of 100 mm
- High durability (2.5 times as much as our conventional one)
- Optimum for machine production, building and civil engineering fields
|
|
|
And' Sistem of Linear Calibration Compact for measures of movement and calibration of blots tools, CMM or tables XY. The Software allows the operator to collect automatically the data of linear positioning in agreement with the several international Standards comprised ISO, VDI and automatic B5.Compensazione ASTHMA of Temp. Material, Temp. and Pressio_ of Air. Field 15m (opzione50m). Precision 1ìm/m (1ppm
|
|
Solartron%u2019s Universal Block Gauge makes precision measurements a simple and reliable process within cavities, internal diameters and more generally when space is limited.
The Universal Flexure Gauge is a compact, frictionless parallelogram device that does not suffer from the wear usually associated with bearing systems
|
|
Linear Measuring Block- XP90S is a key element of the modular measurement product range.
A gauge finger with contact is used to measure the particular part or object.
The slide is mounted on a precision ball guide who is connected to the gauging finger/contact. The gauge finger transmits its motion to the measuring element (electronic probe, indicator unit etc.).
The XP90S can be mounted side by side and connected to one or more accessories in the modular measuring products range. The XP90S comes complete with a set of Allen wrenches and springs for adjusting the unit.
The Linear Measuring Block- XP90S - comes in a box with a male key and a set of springs to adjust the measuring pressure.
|
|
Ensure the quality of your products: Quickly inspect gears and check their working accuracy – thereby guaranteeing quality assurance. This is part of securing the future of every company and decides over success on the market; however it also has to be commercially viable and profitable.
Master gears are used in single and double flank gear rolling inspection as test gears. Frenco are now introducing the new generation of master gears. “Pure perfection” for single and double flank gear rolling inspection, which can be integrated into your production process at low cost and little time.
|
|
|
PECo offers a variety of Spur and Helical Master Gears and Master Worms for the purpose of composite gear roll testing and/or to serve as inspection machine calibration artifacts. Master Gears can be designed and manufactured to meet your specific application requirements or PECo can provide standard master gears up to and including ISO/DIN Q3, AGMA 2015-A3, and JIS quality standards. All PECo Master Gears are designed, manufactured, and supplied, complete with inspection certificates, to meet your specific application requirements.
|
|
The Shallow Probe model LEXFAB-300 is a turnkey system designed to meet the needs for fully automated semiconductor fab application and currently used for the 90nm, 65nm and 45nm nodes.
The LEXFAB-300:
- gives Elemental Concentration AND Thickness of thin films, layers or ULE implants.
- is designed for Product Wafer analysis (measurement area from 10µm to 100µm) including enhanced Pattern recognition.
- is fully compatible with SMIF 200mm, Open Cassette 200mm and FOUP 300mm standards. SECS/GEM automation.
- meets factory-required host communication protocols. Fully compliant with SEMI standards.
- provides Full Wafer Analysis and Mapping (concentration and thickness uniformity).
- is based on a Non-destructive technique.
- allows a high throughput.
- guarantees a high uptime, reliability and stability, ensuring documented long term tool matching.
- has an easy-to-use User Interface with dedicated recipes.
|
|
|
|
Metrology equipment
