|
|
Sensors
We provide a range of different measurement sensor heads with varying fields of view and performance in order to target a wide range of different applications.
In addition to outputing results measured values such as gap, flush, radius, etc, all sensors are also capable of outputing a point cloud consisting of 10,000 data points for each measurement taken.
GapGun3 sensors are the only handheld devices of their type on the market that are routinely used completely non-contact, eliminating product damage during the measurement process, and increasing accuracy and repeatability (see No Surface Contact)
All GapGun3 sensor heads are compatible with all GapGun3 data collectors and are typically bought as a part of a complete GapGun3 system.
Each head ships with a UKAS traceable calibration certificate.
|
|
|
3-D touch probes from HEIDENHAIN were conceived for use on machine tools – in particular milling machines and machining centers. 3-D touch probes help to save costs in the workshop and in medium-size production runs: NC controls can automatically run setup, measuring and verification tasks – and most controls can also run them under program control.
|
|
Features:
» Gemodek Probe
» Probes
» Probe-Changing system
» Optical measuring systems
» Handbox
» Wireless control panel
» Control panel
» Marking tool
|
|
One probe head for every inspection task.
With its own family of probe heads integrating a high-precision SWISS MADE
mechanics, TESA offers a complete solution for three-dimensional measure-
ment.
|
|
|
The 3D-Sensor NG is a further development of our worldwide accepted and proven Universal 3D-Sensor. Its distinguishing features are improved mechanics and a new and compact design.
|
|
Your Vibration Isolation Stage for Nanosurf AFMs
The Nanosurf isoStage — the world’s smallest commercially available active vibration isolation system — is available with adapted Sample Stages for Nanite, Mobile S and easyScan 2 AFM systems. The isoStage allows for placement of the Nanosurf Micrometer Translation Stage and easyScope as options for your convenience. It is the optimal isolation solution for your Nanosurf AFM systems, and protects your scans against vibration disturbances.
The isoStage features active isolation in all six degrees of freedom, is extremely small, and moderately priced! The isolation effect begins at 0.6 Hz and reaches 99.0% isolation (–40 dB) at 10 Hz. The setup of the isoStage Table is exceptionally easy. It does not require any adjustment or tuning prior to use. Just place your AFM on the isoStage as you would for your normal Nanosurf Sample Stages, pull the transport lock buttons, turn on the isoStage, and that‘s it!
|
|
|
|
|
|
AIS has two functions:
To protect vibration-sensitive machines from vibrations emanating from the ground and from structural movement within the equipment itself caused by load changes or other machine movements, and to minimize these vibrations and reduce the time of subsidence.
The AIS consists of a PLC, CAN-Bus, 16 bit-Controllers, High Speed electropneumatic servovalves and BiAir air springs and/or HAB horizontal air springs. A range of sizes are available for both the vertical and horizontal air springs. One 16 bitcontroller and one High Speed electro-pneumatic servovalve is used for each air spring or group of air springs. The AIS works with a minimum of 3 groups (degrees or freedom) to a maximum of 6 groups (degrees of freedom).
Features:
- Active electro-pneumatic vibration isolation with up to six degrees of freedom.
- Highly-effective isolation of vibration without resonance amplification.
- Optimal positional precision in both the vertical and horizontal. Minimal deflection and subsidence times when machine changes loads.
- Highly-effective real-time control. SPS, CAN bus, one control unit for each degree of freedom and a highly-dynamic proportional position valve.
- Each control unit has its own processor and an integrated, high-resolution sensor for position, pressure and acceleration.
- Easy-to-use, intelligent WinSNI software for operation and diagnostics.
- Simple digital switching between scanning mode (during sensitive machine operations) and loading mode. (while machine load is being changed)
- No feed-forward signal required.
|
|
Solartron Analogue Gauging Probes incorporate a precision linear bearing, which gives exceptional repeatability.
• Spring Push
• Pneumatic Push or Vacuum Retract
• Feather Touch
The ultimate in rapid, high accuracy measurement.
|
|
Analog Signal Transmitters via Radio RDT-4000
Many times is needing to have several measuring points distributed in plant or in field, in these applications the wired cost is often higher than the original instruments fare. The solution is feasible at present thanks to free band radio transmitters. The RDT-4000/... is the state-of-art all in one devices, capable to read up to two analog mA, mV, Pt100, Pulses, etc., variables and to transmit them via Radio from 250 devices max., in peer-to-peer or multipoint modes, to a radio-modem RMT-1000 linked by RS-485 or USB to a PLC or PC .
|
|
Analog two-wire transmitters are used for direct connections of thermocouples or resistance thermometers. The design for thermocouples has a built-in reference junction and is available for a multitude of thermocouple types.
The transmitter converts the signal from the temperature sensor into a standard signal of 4 ... 20 mA (current loop). Depending on the design the signal is displayed temperature-linear (resistance thermometer) or EMF-linear (thermocouple).
|
|
|
|
|
|
WAN and LAN TRANSMITTERS for analog variables
with WiFi or Fast-ETHERNET interface
The WDT-4000/... and EDT-4000/... series are LAN-transmitters with interface
WiFi or Fast-Ethernet, including an integrated circuit board for
direct input signal and data acquisition with internal processing of field
variables located near to an access point. Suitable for acquisition and
trasmission by LAN of analog variables in SCADA systems.
WiFi or Ethernet
. ANALOG SIGNALS TRANSMITTER BY LOCAL AREA NETWORK
. 2 x Pt100, mV, 0...4-20 mA, (1) THERMOCOUPLE CJC INPUTS
. 1 x PULSE-COUNTER AND FREQUENCY INPUT
. SPECIFIC VERSIONS FOR CHEMICAL VARIABLES, HUMIDITY, ELECTRIC, LEVEL, PRESSURE, FLOW, VIBRATION, ETC.
. WDT-4000/.. : WiFi COMMUNICATION WITH 1/2 WAVE ANTENNA
. EDT-4000/.. : Fast-ETHERNET COMMUNICATION WITH RJ-45
. RS-485 MODBUS COMMUNICATION AS STANDARD
. ENCLOSURE RATING IP65 FOR FIELD MOUNTING
. POWER SUPPLY 85...265 Vac or 12 / 24 Vdc (OPTION)
. MOUNTING ON WALL OR ON PIPES UP TO 2" (50 mm)
. PROGRAMMABLE BY INNER KEYPAD OR BY LOCAL AREA IP-65
|
|
|
Digital protractor of extreme precision and easy use. Inductive Sylvac system patented, IP51 leve of protection against coolant, water, dirt and dust, according to IEC529. Liquid crystal display. Measurement field 0-360° set to zero in any position. RS232 data output. Possibility of direct conversion from degrees and minutes into degrees and 0.01 degree. Precision: ± 2’ of arc. 360° angle divided into 4x90° and 2x180° quadrants. Power with CR 2032 battery with 3000 continuous hours of battery life. Serial number. Supplied in case.
|
|
Irrespective of their type, all precision levels are based on long-time stabilisation and
reliability, but also on a free measuring base – the centre of the earth. Due to the grav-
itation, the liquid with embedded bubble of gas or the gravity pendulum indicates the
horizontal or vertical level based on this natural reference. Electronic inclinometers or
spirit levels measure the position of the pendulum compared to the measuring faces
fitted on the tool body.
|
|
Dial Angle Protractor
* Stainless steel
* Measuring range 0-360°
* Set includes 150mm, 200mm and 300mm blades
Digital Angle Protractor
* Zero setting at any position
* Movable square
* Battery type lithium
* Service life of batteries – 2000 hours
|
|
Our angular measuring tools include vernier protractors reading to 5 minutes of a degree, regular protractors reading to a degree,and special purpose angular
measuring gages including cutter clearance gages, draftsman protractors, drill point gages a combination protractor and depth gage series.
No. C493
- Angular measurement is from 0-180º in opposite directions allowing the
direct reading of angles and supplementary angles
- Both tools have a flat surface on the back of the head permitting laying the
tool flat on paper or work
- No-glare satin chrome finish
- The No. C493 has a semicircular head
|
|
XT Bore Gauges
Superbore Bore Gauges
Specialised Bore Measurement
SmartPlugs
Digital Cylinder Bore Gauges
Mechanical Cylinder Bore Gauges
|
|
|
Bowers Ultima Bore Gauge offers a choice of resolutions up to 0.0001mm. Featuring the NEW Bowers ‘FASTFIT’ measuring heads with extended measuring range (above 14mm), the Ultima boasts a simple lever operation and a constant measuring force, ensuring outstanding ease of use and repeatability under laboratory or shop-floor conditions.
|
|
|
Bowers XT Analogue Bore Gauges are an economical solution to accurate shop-floor bore measurement. The extended mechanical travel of these advanced two or three point gauges ensures that exchanging measuring anvils is now unnecessary. Their wide application range, 2 - 300mm, rugged construction and easy read scale, ensure both accuracy and ease of use. XT measuring heads and setting rings are supplied with UKAS certification.
|
|
|
Bore gauges with hardened steel contact surfaces for small bores. The travel on the contact surfaces is trasmitted via a needle in hardened steel a 1:1 ration. Interchangeable ogive in hardened steel, heat-insulated handle. Manufactured as per DIN 878, Supplied in case without dial indicator. Version with contact surfaces in hard metal available upon requirement.
|
|
|
The Fowler/Bowers range of mechanical two and three point bore micrometers are now available as XT extended travel versions between .080"/2mm and 12"/300mm. This allows wide measurement range without the need to interchange anvils.
|
|
Features:
- Range .248" - .505"
- Complete set with 3 range extensions and assembly tool
- The world smallest self-aligning dial bore gage
- Gaging pin travel (live end) .010" standard (.016" maximum)
- Gage is supplied with .0001" graduation dial indicator and storage case
- Optional carbide contacts and centralizers
|
|
Starrett offers several series of electronic, micrometer and dial readout Bore Gages with two and three point contact. The choice of a variety of special measuring heads for the 78, 780 and 782 tools provides the ability to configure tools for highly specialized internal measurement applications.
The No. 78XT Series Internal Micrometers feature extended travel, reducing the need to exchange anvils. The ground contact points seat the internal micrometer faster and more accurately than the spherical contacts found in other gages.
|
|
|
The PC 2200 is a state of the art flexible electronic/air column capable of operating with air gauging products and measuring probes. The advanced new column contains a multitude of measuring functions including static and dynamic gauging, classification grading, probe mixing, (A+B), (A-B), etc.
|
|
The CMS non-contact capacitive based hole and countersink measurement system has been established as the benchmark in measuring critical holes for military and commercial aircraft manufacturers around the world. Based on its ease of use, speed (measurement accomplished in a few seconds) and extreme accuracy ( /- 5 microns),
It has gained in popularity at various Airbus locations throughout Europe. The CMS system is particularly well adapted to the measurement of tapered holes based on its multi-sensor (48-sensor) approach to inside diameter mapping.
The addition of the CMS product line is a natural extension for Capacitec as they are currently the market leader in the supply of capacitive non-contact gap and displacement measurement sensor systems to the Aerospace market.
For further information, please contact :
Capacitec Europe
16 Rue Sejourné- 94044 Creteil – France
(33) 1 43 39 48 68
eurosales@capacitec.com
|
|
MEASURING PLUG FOR INSPECTING BORE DIAMETERS
M1 Star is a highly advanced line of measuring plugs developed by TESTAR, a MARPOSS division, for inspecting bore diameters.
The M1 Star MBG (Mechanical Bore Gauge) is the ideal manual instrument for precision measuring of inside diameter, ovality or taper.
|
|
General description
- Modular design, universal bore gauge system for larger bores (M5678 and M68-FB)
- Large measuring range (± 1.5 mm)
- Application range: Ø 26.3 mm to 330 mm/1.03" to 13" (Ø 38.5 mm to 348 mm/ 1.5" to 13.7" for blind bore FB)
- Calibration in setting master or micrometer
- Adaptability to most bore gauging applications
- Blind bore type (FB) in standard programme
- Tungsten carbide contact points
- Holders and depth extensions are manufactured from temperature stabilised material, ensuring minimal gauging errors.
|
|
|
|
|
|
The robust, easy to use SmartPlug range is designed to give the operator greater speed of use, unmatched measuring accuracy and superb repeatability, especially in harsh shop - floor environments. Advanced hand held ergonomics allied to an ingenious mechanical / electronic system render SmartPlugs the easiest to operate Bowers bore gauging system to date. The flexible nature of Bowers SmartPlugs range means that they can be supplied fitted with easy to read electronic indicators (ideal for automatic data collection), conventional analogue indicators, or transducer probes linked to remote digital readout units.
* Range 6 - 280mm
* Tough, robust construction
* Easy-to-use
* Long life
* High accuracy dedicated plug-gauges
* Flexible, modular
* Hand-held measurement
* Can be incorporated into automated measuring systems (in-series)
* Cost-effective
* Short delivery times
* High visibility display
* Protective indicator shroud (with some indicators)
* All setting rings supplied as standard with UKAS calibration certificates
* Coverplates as standard on all SmartPlugs
* Specials (e.g. blind bore) on request
* Repeatability ²1 µm
* Setting by means of a setting ring
* Quick and reliable measurement
* 2 - point measurement as standard
* Blind bore available on request
* Depth-stops available
* Extensions available for deeper bores
* Guide chamfer for easy entry into bore
* High durability, long-life plugs and contacts
* Easy to clean
* Plug body coatings: Hard-chrome (standard), T.i.N., Plain steel
* Measuring contacts: Tungsten carbide, (standard), hard-chrome, ruby, ceramic
|
|
General description
- Self-centring high-precision indicating plug gauge allowing static and dynamic measuring
- Application in manufacturing of high-precision bores from Ø 2.98 mm to 270 mm/0.117" to 10.62"
- Measuring range: 0.1 mm to 0.8 mm depending on diameter and type
- Calibration in setting ring
- Various contact points (material and design) depending on work-piece type
- Many designs in standard programme
- Special design on request
- Extensive range of accessories
- Setting rings according to DIN2250-C in standard programme (range Ø 1 mm to 300 mm/0.04" to 11.8")
- Holders and depth extensions are manufactured from temperature stabilised material, ensuring minimal gauging errors.
|
|
MarStand Indicator Stand 815 MG with flexible stem
- Flexible in any direction, arm can be locked in position
- The sleeves and grounded steel balls of the stem are compressed with a strong steel cable
- Indicating instrument can be rotated through ± 90°
|
|
Super Caliper:
- Waterproof and solar powered, with enhanced charge functions
- Top-ranked digital caliper
ABS Coolant Proof Caliper
- Waterproof type available even at worksite.
- Two types of protection levels IP66 and IP67 are provided.
ABS Digimatic Caliper:
- LCD Character Height is 20% increased
- Further smooth slider surface
- Abundant lineup of calipers such as models with no output and with carbide-tipped jaws
|
|
|
|
Metrology equipment
