|
|
* Exemplary ergonomics, well-balanced, and providing optimum ease of use for working without fatigue.
* Torque configurable to ten stages (including drilling stage).
* Electronic speed regulator to ensure smooth and safe drilling and screwdriving operations.
* Vibration-attenuating 'soft-grip' for safe handling.
* Right and left-hand running with locking function
* Single sheath drill chuck with internal spindle lock and chucking power safety device.
|
|
|
|
|
|
Electronic Combination Hammer KHE 56
Suitable for bits and accessories with SDS-max shank end
With the appropriate accessories, it is also suitable for bits and accessories with spline shank or ratio thread
Rotation stop for chiselling
Metabo VibraTech (MVT): reduced vibration levels and therefore less impact on joints due to the integrated damping system on the handles
Additional handle can be fitted to three places on the housing
Optional 30% impact reduction setting for working with more pliant materials, such as brick
Vario-Tacho-Constamatic (VTC) full-wave electronics for infinitely variable speed change. Speed automatically remains constant under load.
Electronic soft start for precise spot-drilling
Pneumatic high-performance hammer mechanism for effortless drilling in stone and concrete
Optimum heat dissipation and low weight by magnesium die cast gear housing
Torque limiting clutch to limit any sudden reverse torque that can occur if tools jam or get caught.
Stoppable switch for trouble-free chiselling in continuous operation
Chisel can be fixed in 12 positions
Auto-stop carbon brushes to protect the motor
The service display, for example, indicates when the carbon brush needs to be replaced, plus an LED indicating mains voltage
|
|
Cordress Rotary Hammer
- Fastest drilling speed and greatest demolishing performance in the 24V class
- Durable cylindrical gear cover
- One-push tool retainer eliminates the need for sliding the grip to mount the bit
- Comfortable and well-balanced shaped handle
- Switchable hammering force mechanism (POWER mode or SAVE mode increases working efficiency
- Trigger switch with forward/reverse rotation selector (with brake)
- Idle hammering prevention mechanism
- Slip-clutch mechanism
- Replaceable carbon brushes
- 3 mode action: Hammer drilling, drilling only or hammering only
24V High Capacity Slide type Battery: 2.0Ah Ni-Cd EB2420, 3.3Ah Ni-MH EB2433X
|
|
Rotary Hammer
HR3000C
Depth Gauge, Grip, Grease for Bit (Tool does not come with bit.)
FEATURES
- Electronic speed control with variable speed dial for maximum productivity.
- Reduced vibration for less operator fatigue.
- Service reminder light indicates when carbon brushes need replacement or switch / cord needs service.
- One touch sliding chuck for easy bit installation / removal.
|
|
Model: OF 2050 E
• Powerful 2050 watt motor
• Electronic variable speed control
• Plunge depth set by calibrated dial
• Micro depth adjustment
• 3-stage depth stop lock
• Vertical depth adjustment scales
|
|
12mm(1/2") Plunge Router (variable speed)
- 2000 W (120V input: 15 A, 3-1/4 HP) powerful motor to rout smoothly through hardwoods
- The fan of armature is made of aluminum and it has a ring-shaped junction at the outer circumference. Thanks to this Hitachi's unique design, the inertia moment of the armature is increased and the class-top cutting speed is obtained.
- Equipped with a quick adjustment lever and a fine adjustment mechanism knob
- Easy-to-operate variable speed dial on the handle for easy speed adjustment
- Dust guide diverts cutting debris away from the operator
- Improved clutches of the collet chuck
- Dustproof snap switch
- Two- ball-bearing armature design for long service life
- Equipped with a pushing button(shaft lock) for easy bit changes
- Ergonomic design and soft grip handle
|
|
Trimmer
3707F / 3707
Trimmer Guide Assembly, Straight Guide Assembly, Template Guide, Straight Bit (Carbide-Tipped), Wrenches 2
FEATURES
- Rubber roller for easy and precise depth adjustment.
- 3707F : Built-in LED job light.
|
|
|
|
|
|
UHE 28 Multi
Suitable for bits and accessories with SDS-plus shank end or cylindrical shank end (without impact)
Hammer stop for drilling in rotary only mode
Rotation stop for chiselling
Metabo "Quick" chuch change, thereby quick change of hammer chuck for hammer drilling and chiselling and quick-action keyless chuck for drilling and fastening screws
Metabo CODE! System: electronic anti-theft system at the touch of a button.
Clockwise and anticlockwise rotation
Vario-Tacho-Constamatic (VTC) full-wave electronics for infinitely variable speed change. Speed automatically remains constant under load.
Thumbwheel for preselection of speed
Robust Metabo Marathon motor for extra long service life
Two-speed gear unit: two drilling speeds for drilling in wood and metal (no impact)
Pneumatic high-performance hammer mechanism for effortless drilling in stone and concrete
Die cast aluminium gear housing for optimum heat dissipation and stability
Ergonomic housing design for fatigue-proof operation
Rubber-coated handle: vibration-reduced, comfortable and safe
Metabo S-automatic torque limiting clutch: to limit any sudden reverse torque that can occur if tools jam or get caught.
Metabo winding protection grid to protect the motor from abrasive effects
Overload protection by electronic monitoring of coil temperature. LED for impending overload.
No-volt release switch: prevents unintentional machine start
Auto-stop carbon brushes to protect the motor
Brush wear indicator
|
|
|
Atlas Copco has a wide range of chipping hammers, scalers and rammers. Choose the tool that gives the best results in the toughest working conditions, yet are easy on the operator. These are effective, reliable tools for fettling of castings, chipping operations in the mechanical industry, hole making and light demolition of concrete. In Atlas Copco we care for the operator and many models in the range feature efficient vibration dampening regardless if you’re busy cleaning weld seems or cleaning big casted steel pieces in a foundry
|
|
Industrial Tools
Your success is our success
The innovation drive at MANNESMANN DEMAG Drucklufttechnik KG knows no compromise. And the permanent
technical further development of our quality industrial tools always has utmost priority
for more customer benefits.
Focal aspects in the development of new precision tools are therefore
- improvement of performance data,
- extension of the product service life,
- reduction of noise emissions for an added environmental benefit,
- perfection of ergonomic design to make life easier for the worker
In development and design, MANNESMANN DEMAG Drucklufttechnik KG has always used state-of-
the-art technology - from the first CAD 3D drawings right through to the thoroughly tested
end product.
|
|
Apart from noise generated by hand held pneumatic air tools, the inherent vibrations are a health risk for everyone who has to work with such tools over a longer period of time. People who work with pneumatic hammers on a daily basis are subject to the so called "white finger disease". Painful inflammation can be the result and under special circumstances, such as hard knocks hairline cracks in the bone mass can appear.
Passive measures to reduce vibration such as special gloves have not provided the desired success. Red Rooster has reduced the vibration through design measures to an acceptable level.
|
|
|
From the time our first drill was produced in 1901, Atlas Copco has demonstrated a thorough understanding of diverse customer needs, a solid commitment to delivering the best possible solutions, and a firm belief in innovation. So it is no wonder that our drills have evolved to meet changing customer demands over the years. More than a century later, our drills work anywhere you do. You’ll find Atlas Copco drills at work worldwide in various industries for a broad range of applications. From bus body and trailer producers in the motor vehicle industry to aerospace and aircraft manufacturing. You name it!
|
|
Dotco® drills are used daily in applications ranging from
aerospace to oil fields and refineries. Three styles are
available - pistol grip, straight handle, and right angle
models. Drills in this section range from 0.3 – 1.5HP.
Plus, dead handles are available for several models.
|
|
|
|
|
|
Ingersoll Rand air drills are built with your professional application in mind. Industrial quality chucks, powerful air motors, durable gearing and quiet operation provide a tool you can count on to get the job done right.
Choose the chuck size you need from the list below and enter the world of high performance drilling.
- 1/4" Chuck
- 3/8" Chuck
- 1/2" Chuck
Ingersoll Rand production drills are designed for continuous use in the world's most demanding industrial applications. These tools are your clear choice when you need to deliver superior hole quality and accuracy at just the right cutting speed shift after shift.
Whether your job is assembling aircraft or fine cabinetry, Ingersoll Rand has a drill to suit your application requirements. Choose the configuration, motor size, speed, and bit or output spindle on the pages below - and get ready to experience a higher level of performance.
- Production Drills
- Production Angle Drills
- Precision Angle Drills
- Lightweight Riveters
- Tappers
- Modular Drills
- Electrode Dressers
|
|
Drills
The drills are suitable for a large number of applications. Both for use in the industry, steel and aluminium processing, car manufacturing, truck manufacturing, home electrical appliances, but also the general use in the workshop is covered.
The Yokota drills are executed with a 2-step trigger. The first step is used for setting the drill in the right spot of the workpiece, the second step is used for drilling the hole at high speed. The silencers can be turned 360 degrees.
Please take care to choose the right drill for the right capacity. Capacity and RPM of the tool are designed to fit to each other.
|
|
BP 3-10
This variant of BIAX Drilling machine is very useful for robust use. Suitably this tool has a very good engine power.
BP 0,5-10
This variant of BIAX Drilling machine is very useful for robust use. Suitably this tool has a very good engine power.
|
|
KEYLESS CHUCK DRILL
no-load speed: 2200 revs
air consumption: 210L/minute
inlet: 1/4"
keyless chuck
Compact, powerful and light drilling machine. Handle revolver Chuck autoserrant no-load Speed
|
|
Stationary Drill-Spindles
with collet up to 6mm / 0.25in drill diameter
for drill-chuck up to 10mm / 0.375in drill diameter
for wood-drills
with threaded shaft 10mm / 0.375in drill diameter
Drill spindles are optional available with a collet, a drill-chuck or a threaded spindle-shaft for wood-drills.
The spindles are completely sealed; exhaust air canot escape, nor can contamination from the outside penetrate.
They can be operated without lubrication at an approximate 15% power loss.
Due to general valid physical principles, lubrication naturally improves the spindle's lifespan and operational-behavior.
In both cases a corresponding air-preparation is essential, such as moisture-removal, filtration and if necessary lubrication.
The exhaust-air guidance over an exhaust-hose is always to be recommended as a meaningful supplement.
|
|
Drill with self-locking 10 mm chuck
V.102MF
Technical caracteristics
- Self-locking steel chuck.
- Free speed : 2,800 rpm.
- Average air consumption : 124 l/min.
- Air inlet thread : 1/4".
- Working pressure : 6.2 bar.
- Motor power rating : 0.44 kW.
|
|
CP Industrial drills:
These tools are suitable for high production rates such as those on production/ assembly lines, where high durability is required and the tools are used frequently. Our industrial tools combine the best of quality, durability and ergonomics for your most demanding applications.
|
|
An air drill's chuck does most of the work. That's why all Ingersoll Rand air drills are engineered with high quality chucks that resist wear and tear. Our new family of air drills have industrial grade chucks and keyless chuck versions that are extra tough for drilling, sawing, valve guide reaming, cylinder honing and wire brushing. They are more powerful, efficient and durable than previous models, with smooth, quiet operation.
1/4" Chuck - .4HP, 1800 RPM
3/8" Chuck - .5HP, 1200-2500 RPM
1/2" Chuck - .5HP, 400-500 RPM
|
|
Fours models available in three versions to meet all your application :
- hand held for construction and quarrying
- air leg for mining
- semi-stopper or stopper for tunneling or bolting
|
|
|
|
|
|
Multiple mounting arrangement options for ease of operation
Quick-change cartridges for easy type changing
Floating anvil guarantees legible stamping even on irregular surfaces
Pannier’s single stroke pneumatic hammers provide a controlled impact for positive identification of hot slabs, ingots or billets. Stationary or sling mounted units are actuated by depression of the head into the material. Optional quick-change cartridges are available for legends that change often.
Pannier’s single stroke pneumatic hammers provide a controlled impact for positive identification of hot slabs, ingots or billets. Stationary or sling mounted units are actuated by depression of the head into the material. Optional quick-change cartridges are available for legends that change often.
Model D5
Medium-duty hammer for up to 60 ft/lbs of stamping force. Can be equipped with hooks for sling mounting, handles, or guide support wheels.
Model F4
Heavy-duty hammer for up to 120 ft/lbs of stamping force. Can be equipped with hooks for sling mounting, handles, or guide support wheels.
Model 9200
Semi-automatic, stationary mount hammer pneumatically powered for up to 135 ft/lbs of stamping force. “Head trip” feature initiates stamping only upon contact with the material being marked.
|
|
|
Every great riveter knows his hands are his greatest asset. So protecting them is a top priority. With Atlas Copco you never have to wonder if you do what you can. There’s only one choice for the ultimate in comfort and safety – the unique RRH riveting hammer and RBB bucking bar. They’re air dampened for the lowest recoil available. And they work together as a system. So, for optimal dampening, you need to see the two as one. Riveters from Atlas Copco are used in many industries ranging from off-road and truck production to train and aircraft manufacturing. Many of the leading aerospace companies around the world are today enjoying almost vibration free riveting all the way up to ½” rivets.
|
|
CP Industrial Rivet Hammers:
These tools are suitable for high production rates where high durability is required and the tools are used frequently. Our Industrial tools combine the best of quality, durability and ergonomics for your most demanding applications.
The unique features of these tools include a progressive 'teasing' throttle for improved controllability.
CP RediPower Rivet Hammers:Product RP9311 Hammer
RediPower tools are suitable for MRO (Maintenance, Repair, Operations) applications where the tool is used intermittently for industrial maintenance or non-intensive production.
CP riveting hammers can also be used for a variety of other operations including chipping, scraping, metal cutting, peening and more.
|
|
20mm(3/4") Impact Drill
- Class-top drilling speed and 790W (6.0A/120V) Powerful motor
- Compact(333mm(13-1/8") in entire length) and 2.2Kg(4.9 lbs.) lightweight for less user fatigue
- Aluminum die-casting inner cover and gear cover for increased durability
- Easy-to-operate 2-finger sized trigger switch with speed control dial
- Reliable and convenient push-button type forward/reverse changeover switch
- Easy-to-selected change lever for quick selection of impact drilling or drilling only mode
- Shortest chuck offset (23.5mm(15/16"))
- Soft grip handle for comfortable operation
- Slip clutch mechanism (for specific destinations)
|
|
| ... products without technical information |
| |
|
|
Drilling tools
