|
|
Bohrdurchmesser 13 - 80mm
Mit Morsekegel
Winkelbohrmaschinen sind zum Bohren und Reiben an schwer zugänglichen Stellen unentbehrlich. Mit einem zusätzlich lieferbaren Griffrohr mit Klemmring sind sie jedoch auch als Universalmaschinen gleich vorteilhaft verwendbar. Alle Winkelbohrmaschinen sind mit einer Vorschubspindel ausgerüstet, die gleichzeitig zum Auspressen der Einsteckwerkzeuge dient.
Gegen Mehrpreis können DREB 23 bist DREB 51 LLU statt mit Handkreuz auch mit einer Ratsche ausgerüstet werden. Für besonders beengte Verhältnisse kann eine niedrige Bauart ohne Vorschubspindel und Handkreuz geliefert werden. Die Typen DREB 23 bis DREB 50 sind mit einem Drehzahlregler des Leerlaufluftverbrauchs ausgerüstet.
|
|
Angle Drill
- Smaller grip and low head in 83mm for quarter work
- Faster drilling speed
- Slide switch
- Reversing switch and variable speed dial on rear end
|
|
Angle Drill
DA3010F / DA3010
Chuck Key S10, Grip 36 Complete
FEATURES
- Only 66mm (2-5/8") in head height.
- With keyed chuck.
- DA3010F : Features a built-in LED job light.
|
|
|
These chisel compacts are used in soft formations where fast penetration rates are possible and tooth breakage is minimal.
|
|
Model: BH 26 LXE
• Powerful 750 watt motor
• 26 mm drilling capacity in concrete
• Rotary stop for light chiselling applications
• Soft hammer mode reduces blow energy and speed for control in chiselling applications
• FIXTEC quick change tool system
• AVS anti-vibration system signifi cantly reduces vibration for user comfort and safety
• Safety clutch for user protection
• Hammer action stop for drilling in wood or metal
|
|
1100 KH-Max
Product features
-Control electronics for precise spot drilling and chiselling
- Rubber-coated handle for long-term, fatigue-free work
- Safety clutch to protect operator
- Synchronized switchover from drilling to chiselling
- Rotation stop with spindle lock for heavy chiselling work
- Carbon cut-off brush for motor protection
- Anti-vibration handle for low-vibration work
- Service cover for quick carbon brush change
- Variable chisel positioning (16 positions)
- 360º rotatable additional hand grip which means that this tool can also be used by left-handed operators
- Robust 4 m rubber mains cable
|
|
THE TOUGHEST COUPLE EVER.
TAKE TWO. SNATCH ONE. / SMALL HAMMERS
Combination or multi: Our hammers have proper power. With 3 Joules single-blow energy and 4,400 blows per minute, giving you more drilling capacity than ever before. The combination hammer KHE 28 Plus lets you hammer drill, drill without impacts, screw and chisel. The multi-hammer UHE 28 Plus features an additional second gear for even more effective drilling in wood or metal.
Remaining unchanged are the proven ergonomic housing for low-fatigue working and the long service life of our hammers. Plus, you are on the safe side with our extensive guarantees and round-the-clock service – with replacement parts for at least 8 years.
Metabo. Work. Don’t play.
|
|
|
|
|
|
The D040 ¼" Mini Drill is the perfect solution for all of your tight access drilling applications. At less than 7"/ 176 mm long and weighing less than 2.5 lbs / 1.15, this tool can fit into even the smallest areas with ease. With a variable speed trigger and maximum free speed of 1100rpm, the D040 is optimized for both drilling in metal with up to ¼" diameter bits, and tackling small fasteners with ease. Compatible with all 7.2v IQv batteries including NiCd and Lithium Ion.
Other models available :
- D550 cordless drill/driver . Industrial keyless ratcheting chuck with carbide steel jaws guarantees industrial grade performance. Compatible with all 14.4v IQv batteries including NiCd and Lithium Ion. Its 17-position clutch plus drill mode makes the D550 ideal for a wide range of drilling and fastening applications.
- D650 cordless drill/driver . Industrial keyless ratcheting chuck with carbide steel jaws guarantees industrial grade performance. Compatible with all 19.2v IQv batteries including NiCd and Lithium Ion. Its 17-position clutch plus drill mode makes the D650 ideal for a wide range of drilling and fastening applications.
|
|
12V 2 SPEED ULTRA COMPACT DRILL/DRIVER Model: BS 12C2 Li
Features
• Compact pocket drill/screwdriver measuring only 160mm
• 17 stage torque adjustment plus additional drilling stage
• 2 speed gearbox for wide range of applications
• Industrial metal gearbox and gears for superior durability
• FIXTEC spindle lock and keyless 10mm chuck
• Electronic switch with variable speed
• Built in LED light illuminates the work surface
|
|
D040 1/4" Mini Drill
1/4" Keyed Chuck
Cordless Drill/Driver
The D040 ¼" Mini Drill is the perfect solution for all of your tight access drilling applications. At less than 7" long and weighing less than 2.5 lbs, this tool can fit into even the smallest areas with ease. With a variable speed trigger and maximum free speed of 1100rpm, the D040 is optimized for both drilling in metal with up to ¼" diameter bits, and tackling small fasteners with ease. Compatible with all 7.2v IQv batteries including NiCd and Lithium Ion.
|
|
9.6V Cordless Driver Drill
(Variable Speed,Reversible)
- Max. Tightening Torque : 19 Nm(168 in.lbs.)
- 10mm(3/8") industrial-grade keyless chuck, compact and lightweight 1.5kg(3.3 lbs.)
- Fan-cooled Motor for high power and durability
- Electric feedback and brake for performing effective work
- 22-stage torque adjustable clutch
- Two(2) speed transmission with one-touch speed knob
- Push button type reversing switch
- Convenient Tool Strap
- 9.6V High Capacity Battery: 1.4Ah Ni-Cd (EB914)
|
|
BDF451
Fast Charger, Battery Cartridge, +-Bit, Grip Assembly
FEATURES
- EXTREME COMPACT + POWER
- Makita's original Four-Pole Motor delivers more efficient power in a compact size.
- EXTREME ERGONOMICS
- Ergonomic shape fits like a glove with even pressure and easy control.
- EXTREME BEAM
- LED Job Light can be illuminated without running motor.
|
|
|
The new L, LT and LTX-class cordless range are masters of their trade. There are many reasons for this: They are high-performance machines and extraordinarily light and compact. The new gear concept with its innovative torque clutch makes a wider range of applications possible, as the adjustable torque range has been virtually doubled. Thanks to our new motor & battery concept we have been able to make the machines more compact and even more powerful. We have also managed to protect your investment and increase service life through our new electronic single cell protection (ESCP) system which protects the battery pack and the machine from overloading. Our tried-and-tested AIR COOLED charging technology means the battery packs are, as usual, charged gently and quickly. Born through design to give you tools you can trust. For added piece of mind we now provide a three-year warranty on all machines, batteries, chucks and chargers.
|
|
- Lightweight for fatigue-free work
- Variospeed (V) electronics for infinitely variable speed change
- 20-level adjustable torque, plus drilling level
- Motor with integrated air cooling
- Quick stop for rapid fastening of screws
- Spindle stop for manual turning and loosening of screws
- Spindle with hexagon recess for screwdriver bits
- Integrated working light for good vision even in dark corners
- Pistol grip for optimum power transmission in direction of drilling
- Sturdy die cast gearbox housing for long service life
|
|
|
|
|
|
3.6V Cordless Driver Drill
- Compact and 0.4kg (0.9lbs.) lightweight and 249mm(9-13/16") overall length
- Dual position handle converts from straight to pistol grip for flexibility in tough to reach spaces
- Switch into drilling mode to drill small pilot holes or choose from 21 clutch settings to drive screws flush into wood or drywall
- Convenient forward reverse switch
- Lock button for preventing inadvertent start of the motor and also usable as a manual screwdriver
- 5 Nm(44 in/lbs.) of Max. tightening torque to power through fastening applications
- Two speeds, 200/600 RPM for better control based on the application
- 6.35mm (1/4") hex chuck for quick and easy bit changes
- Built-in LED light to illuminate the work surface
- 3.6V, 1.5Ah Sealed cylindrical lithium-ion strorage battery: EBM315
- EBM315 Lithium Ion batteries for long life (approx. 500 battery life cycles)
- Terminal cover for preventing improper short circuit
- A lithium ion battery provides a full charge evry time thanks to no memory effect
- Charger: UC3SFL with overcharge prevention circuit
|
|
18V ULTRA COMPACT DRILL/DRIVER
Model: BS 18C Li
Specifi cation
• Small, compact & powerful for high torque applications
• 51 Nm maximum torque delivers complete power
• 2-speeds - 0-450 rpm/0-1650 rpm
• Integrated clutch and chuck for a more compact design
• LED for work place illumination
• Forward and reverse
• Powerful fade free lithium-ion 18 volt power pack
|
|
|
HXY—2BT Core Drill is developed to meet the needs of users and the development of geological works, it is a new type vertical shaft core drill. It is applicated for engineering geological exploration drilling, hydrogeology well drilling and big—hole basic engineering drilling including core drilling with tungalloy—carbid—tipped and diamond bit mainly.
|
|
Highlights:
- Versatile through our distance plate up to Ø 500 mm and 5.2 kW power
- Precise working made easy thanks to our easy adjustable, low-wear steel-bronze guides
- Use the extension tracks if you need more penetration. Available from 230 mm up to 910 mm
- High-quality steel toothed rack paired with precise, integrated steel guides
- Wire Saw SK-B may be mounted on this drill stand
|
|
Model: PM 3
• Powerful 720 watt motor
• 4.1J impact energy for powerful chipping
• Variolock (35 positions) for selecting the most appropriate chisel angle
• Service hatches for easy changing of carbon brushes
• Lock-on switch function
• AVS anti-vibration aystem signifi cantly reduces vibration for more comfortable operation
• Soft-grip for more comfortable handling
|
|
H 60MR
Demolition Hammer
- High chipping and demplishing performance with low vibration and noise level
- Internal double-insulation construction with sturdy aluminum frame
- Hitachi original design vibration-absorbing handle for excellent vibration reduction
- Large trigger switch and soft-touch grip for easier handling
- D-type side handle with adjustable mechanism for 360º rotation plus positioning from front tp rear
- Shock-absorbing mechanism results in prolonged service life
- Simple turning method , variable lock mechanism for easy working-angle adjustment of chisels, etc.
- A very original design
|
|
Hitachi 10mm(3/8")Drill
- Class-top drilling speed and 690W Powerful motor
- Compact (320mm(12-19/32") in overall length and 1.8Kg(4.0lbs.) lightweight for less user fatigue
- Aluminum die-casting inner cover and gear cover for increased durability
- Easy-to operate 2-finger sized trigger switch with speed control dial
- Reliable and convenient push button type foewaod/reverse changeover switch
- 2-speed transmission
- Shortest chuck offset (23.5mm(15/16"))
- Soft grip handle for comfortable operation
- Low operation noise 79dB
|
|
FEATURES
- Heavy duty motor and compact body
850W Heavy duty motor
No load speed:1,300rpm
Compact: 228mm (9")
- Rear handle with soft rubber grip
Ergonomically designed for comfortable operation.
- In-line design
Brings drilling pressure in line with center of drill bit axis.
- All ball bearing construction
|
|
2 speed drill
850 BM-2
Product features
- Aluminium die-cast gearbox ensures longevity
- Thermal touch protection at continuous operation
- Reversible function
- Full wave electronics and speed pre-selection for soft drilling and precise screwing
- Soft hand grip and rubberised trigger switch for fatigue-free working
- Mechanical 2-speed gear provides optimal working torques
1. speed = high torque for drilling with large drilling Ø and screwing,
2. speed = high speed for drilling with small drilling Ø
- Safety friction clutch protects the user
- Auto spindle lock for convenient change of the tools
- Euro collar Ø 43 mm with locking knob for use in the upright of sensitive drill
- 4 m rubber mains cable with patented quick lock. Available as an accessory in 4m and 6m lengths.
|
|
ASge 636
Gewindeschneider bis M 8
Handlicher, leistungsstarker Gewindeschneider.
Kraftvoller Durchzug zur zuverlässigen Aufgabenbewältigung.
Integriertes Wendegetriebe mit Schnellrücklauf.
Stufenlose elektronische Drehzahlstellung für gefühlvolles Ansetzen.
FEIN Kinetik-Griff für ermüdungsfreies und sicheres Arbeiten.
Integralschalter für komfortable Bedienung.
|
|
610 watt electronic hammer drill SBE 610 Impuls
Selectible impulse mode for exact screw-driving and comfortable drilling
Variospeed (V) electronics for infinitely variable speed change
Thumbwheel for preselection of speed
Compact, lightweight machine in pot design for permanent use
Die cast aluminium gear housing for optimum heat dissipation and stability
User-friendly guidance of machine exhaust in all working situations
Long-life motor
Clockwise and anticlockwise rotation
Impact-proof Metabo quick-action keyless chuck Futuro Plus for quick tool change
Spindle with hexagon recess for screwdriver bits
Lightweight design prevents fatigue
Ergonomic housing design for ideal handling
Rubber-coated handle: vibration-reduced, comfortable and safe
Auto-stop carbon brushes to protect the motor
|
|
* Exemplary ergonomics, well-balanced, and providing optimum ease of use for working without fatigue.
* Torque configurable to ten stages (including drilling stage).
* Electronic speed regulator to ensure smooth and safe drilling and screwdriving operations.
* Vibration-attenuating 'soft-grip' for safe handling.
* Right and left-hand running with locking function
* Single sheath drill chuck with internal spindle lock and chucking power safety device.
|
|
|
|
|
|
Electronic Combination Hammer KHE 56
Suitable for bits and accessories with SDS-max shank end
With the appropriate accessories, it is also suitable for bits and accessories with spline shank or ratio thread
Rotation stop for chiselling
Metabo VibraTech (MVT): reduced vibration levels and therefore less impact on joints due to the integrated damping system on the handles
Additional handle can be fitted to three places on the housing
Optional 30% impact reduction setting for working with more pliant materials, such as brick
Vario-Tacho-Constamatic (VTC) full-wave electronics for infinitely variable speed change. Speed automatically remains constant under load.
Electronic soft start for precise spot-drilling
Pneumatic high-performance hammer mechanism for effortless drilling in stone and concrete
Optimum heat dissipation and low weight by magnesium die cast gear housing
Torque limiting clutch to limit any sudden reverse torque that can occur if tools jam or get caught.
Stoppable switch for trouble-free chiselling in continuous operation
Chisel can be fixed in 12 positions
Auto-stop carbon brushes to protect the motor
The service display, for example, indicates when the carbon brush needs to be replaced, plus an LED indicating mains voltage
|
|
|
|
Drilling tools
