|
|
The RatioMatic is a nozzle-mix industrial burner designed for direct air heating, indirect air heating and professional oven applications up to 1800° F. (1000° C.)
The burner package includes a combustion air professional blower and an air:gas ratio regulator to allow firing over a wide gas turndown range at a controlled ratio.
This burner is available with the Eclipse HeatPak packaged cock train - flame safety option.
|
|
Eclipse Air Heat Industrial burners are line type burners ideal for generating large volumes of clean, hot air. Applications include professional ovens, industrial dryers, fume incinerators, and similar industrial lines.
The "AH" models feature an integral combustion air professional blower mounted on the back of the burner’s steel case. By supplying the correct air volume and pressure to the burner, the blower allows stable operation over a wide range of duct velocities without installing a profile plate around the burner.
|
|
The Peabody Blast Furnace Gas (B.F.G.) professional burner from
Hamworthy Combustion Engineering has been designed for
use in boilers, industrial furnaces and fired heaters that utilise low
calorific value gas as the main fuel.
The burner is a volute plenum chamber, which the gas enters
tangentially and flows In a single uninterrupted stream until it
leaves through the unobstructed annular exit port into a
refractory throat. |
|
INDUSTRIAL INDUSTRIAL BURNER
Production as per DIN 4787-4788 and European standards
CE and other certificates
- Low emission values
- Silent operation
- Superior Design
- High efficiency
- High technology |
|
BABCOCK WANSON designs and manufactures its own industrial burners, to match its boilers with the best possible synergy.
User advantages :
- reliability and robustness ;
- total gas combustion, minimised CO generation ;
- shape of flame adapted to the professional boiler optimising the heat transfer (radiation and convection) ;
- NOx levels and exhaust gas figures derived from actual operating conditions ;
- electronic modulation of the combustion air professional fan to increase efficiency ;
- easy access to the various components ;
- extensions of guarantee up to 6 years ;
- range of modulation 1:8 ;
- noise level lower than 85 dB with full power, improved to 75 dB by additional silencing ;
- stated fuel consumption ;
- minimal fouling when used with viscous fuels.
|
|
The ImmersoJet (IJ) is a nozzle-mix tube-firing industrial burner that is designed to fire at high velocities through small diameter immersion tubes.
The combustion gases from the burner scrub the inner tube surface and produce high heat transfer rates. This, in combination with the high velocity flow through the smaller diameter tubes allows for system efficiencies in excess of 80%.
The smaller IJ tubes also have smaller bends which means less tank space is occupied by the tubes. With a combustion chamber that is integral to the burner body, the new version of the ImmersoJet can sit lower on the tank than previous IJ models.
This burner is available with the Eclipse HeatPak packaged cock train - flame safety option.
system. |
|
MAXON Industrial control panels provide the primary operator interface with combustion systems of varying sizes to meet your specific control needs.
For safe ignition and control of industrial industrial burners, MAXON Control Panels can provide:
Standard or custom designs to suit the application and comply with local standards.
Analog or digital control circuits with or without PLC SUPPLIERS options
Flame Safeguard and permissives in compliance with various world wide standards and codes
Approved high temperature limit and temperature controllers
First out annunciation for convenient system status
General purpose, weatherproof enclosures with options for hazardous duty service
Highly visible indication lights and easy-to-operate switches
Combustion air professional blower motor starters and options for system motors
Customized panels available upon request |
|
MULTIFIRE® Industrial Industrial burners incorporate a nozzle-mix refractory block design capable of "on-ratio" firing over a broad range of operating conditions. The dual fuel capability allows MULTIFIRE® Burners to fire on either gas or oil. Maximum application flexibility is provided with five different sizes and "on-ratio" capacities up to 17,500,000 Btu/hr per burner. In addition, MULTIFIRE® Gas burners atomize fuel oils with
low pressure combustion air eliminating the need
for pneumatics or steam. |
|
Fully modulating versions using proven technology of variable
speed motor control and fuel/air ratio gas control valves manufacturers
are also available in the Hamworthy range of monobloc industrial burners.
Oil and gas fired versions also incorporate a suitable
oil pump and gas train respectively, the latter including governor, automatic shut-off cocks, gas cock and test point.
Pilot assemblies, where fitted, also include governor,
automatic shut-off valves and gas cock. |
|
Combustion Chambers
standard or custom-built combustion chambers.
especially designed to allow a flame inside
short heat-up and cool-down times
designed for optimum professional burner performance.
available in various materials.
adapted to customers process.
Commissioning & After Sales Service
MAXON combustion systems and equipment have been engineered for a minimum of maintenance.
MAXON can provide technical support during and after commissioning in almost every corner of the world through a broad international network of offices and representatives.
All MAXON offices have a stock of common spare parts, allowing MAXON to respond quickly to parts requests. |
|
ECOSTAR PROFESSIONAL DUCT, PROCESS INDUSTRIAL BURNERS
Production as per DIN 4787-4788 and European standards
CE other certificates
- Low emission values
- Silent operation
- Superior Design
- High efficiency
- High technology |
|
The purpose of an ignitor is to supply the necessary heat release for startingup an industrial burner.
Taking advantage of over 80 years expertise in combustion, PILLARD propose a wide range of electricgas ignitors which may fit all types of industrial burners for boilers, refinery heaters, process industrial furnaces, hot gas professional generators,
rotary furnaces, and reactors of Claus units.
The PACKLIGHT ignitor fires on natural gas or propane.
Its particularity is to incorporate the high industrial voltage transformer in its rear
housing generating the lightingup spark, as well as the ionization
industrial electrode ; the self-checking ionization detector (type PILLARD “IONY” leaflet n° 0202) allows the presence of the ignitor’s flame to be permanently monitored.
The PACKLIGHT ignitors join together the following advantages :
• Ability to supply a heat release of up to 19 kW (400 kW in special
version).
• Incorporation in the rear housing of the high voltage transformer and
the ionization self-checking detector which simplifies installation.
• Display of ionization detection level and gas pressure, which eases
commissioning and maintenance.
• Plug-in connexion which eases maintenance.
• Sturdy and compact construction.
• Easy and quick replacement of the complete rear housing, which eases
maintenance.
• Available with or without external air feed, operation as intermittent
ignitor or permanent pilot, and available in EXPLOSION PROOF
version. |
|
Dräger Safety optical flame detection provide the reliable detection of a wide range of both hydrocarbon and non-hydrocarbon based fires. Providing a perfect solution to the ever increasing demand of flame detection throughout industry, they can also be used along with Dräger supplier of gas detection technologies to form part a complete safety system
The reliability and flexibility of Dräger flame detectors, along with their worldwide approvals ensure suitability for just about any application anywhere in the world.
|
|
The Model FL3111HT is a high temperature rated (125°C) ultraviolet (UV) optical flame sensor designed to detect unwanted fires while maintaining false alarm immunity. The FL3111HT detects only in the UV spectral range for optimized speed of response.
The FL3111HT's electronics are integral within its stainless steel explosion-proof housing, allowing detector information to be processed at the point of detection. The electronics are fully separated from the Exe wire compartment offering protection during installation and service. |
|
Flame detector for continuous operation IFW 50
Flame detector for flame signalling or for multi-flame control in conjunction with IFD 450/454, for continuous operation, ionisation control.
Mains voltage: switchable from 220/240 V AC to 110/120 V AC, for earthed or unearthed mains.
Flame detector IFW 15
Flame detector for flame signalling or for multi-flame control in conjunction with IFS 110/111IM, for intermittent operation, ionisation or UV control. For earthed or unearthed mains, mains voltage:110/120 V AC or 220/240 V AC.
Flame detection PFF
Flame detector in 19" standard rack for multi-flame control in conjunction with PFS/PFD or for flame signalling.
PFF 704: for intermittent operation, ionisation or UV control,
PFF 754: for continuous operation, ionisation control,
with 4 independent flame professional amplifiers,
mains voltage: switchable from 220/240 V AC to 110/120 V AC, for earthed or unearthed mains.
|
|
Flare Tips
- Pipe types (FN, FNS, FNH3)
- Steam-assisted (FC, FUS, FSX)
- Air-assisted (FAB, FAB MKII and MK III)
- Sonic (FSM Tulip, FSM Multibranch MKII and MK III)
- Offshore
Elevated Flares
- Self-supported
- Guyed
- Derrick supported
- Guyed Derrick
- Derrick with demountable risers
Ground Flares
- Enclosed
- Open multi-point
Other Flares
- Portable flares
- Pit flares
- Dry and wet liquid industrial burners
- Bio-gas flares
- Steelworks flares |
|
Efficient and Simple, Winnox Industrial burners Meet Tomorrow's Emissions Mandates Today
Designed to comply with the global emissions mandates of the 21st century, Winnox burners are also simple to set up and operate.
Ideal for air heating and professional oven applications, Winnox burners incorporate direct-spark ignition and an air/gas regulator to fire efficiently over a wide gas turndown range at a controlled ratio.
|
|
Circular INCINO-PAK® Industrial Industrial burners have been specifically designed for the incineration of combustible gaseous effluents inside cylindrical combustion chambers. With INCINO-PAK® direct combustion, higher efficiencies can be achieved than with powered burner systems. The special cone-type COMBUSTIFUME® Natural Gas burners provide easy outside access to the raw gas pilot, ignitor, and flame monitoring components.
|
|
Industrial burners for gas BIC
Burners with cast steel housing, connection for ceramic tube provided.
Burner size: 50 to 140,
capacity: 10 to 360 kW,
flame shape: normal flame or long, soft flame,
gas type: natural gas, town gas or LPG,
length of burner tube: depending on ceramic tube,
connection:
gas: thread,
air: thread or flange.
The following versions are available:rnburner with integrated ignition lance.
Burners for gas ZIC
Burners with steel-plate housing, connection for ceramic tube provided.
Burner size: 165 and 200,
capacity: 630 and 1000 kW,
flame shape: normal flame or long, soft flame,
gas type: natural gas, town gas or LPG,
length of burner tube: depending on ceramic tube,
connection:
gas: thread,
air: flange.
The following versions are available:
burner with integrated ignition lance.
|
|
MAXON's OVENPAK® 400 Series is the world's most flexible and reliable industrial professional burner. The OVENPAK® burns most any fuel gas and requires only low pressure fuel. This natural gas burner provides clean combustion with low NOx levels while providing unmatched turndown.
OVENPAK® Manufacturers of gas burners provide outstanding performance in professional ovens and industrial dryers, paint finishing lines, paper and textile machines, food baking ovens, coffee roasters, grain dryers, and fume incinerators.
|
|
GAS AND OIL INDUSTRIAL BURNERS
Production as per DIN 4787-4788 and European standards
CE and other Certificates
- Low emission values
- Silent operation
- Superior Design
- High efficiency
- High technology |
|
The Eclipse Vortometric v2.00 is a dual-fuel, high intensity burner which operates at maximum efficiency whether firing fuel oils or natural, propane, butane, manufactured or other mixed gases.
The high combustion air swirl rate produced by the Vortometric burner results in a stable flame with high turndown capabilities on a wide range of fuels. The burner can be operated with low excess air where maximum efficiency is required or high excess air for high volume process air heating.
The intense and thorough mixing of the air and gas results in low NOx and CO emissions.The novel design of the oil atomizer uses shear forces and acoustical energy created by a "vortex professional generator" to vaporize the fuel for clean, smoke-free combustion.
Vortometric v2.00 industrial burners are available with capacities of 6mmBtu/hr.to 210mmBtu/hr. Low combustion air pressure is used (7.5"w.c.)with all sizes and atomization of the fuel oil can be by steam, air, or any gaseous fuel.
|
|
| In industrial heating today, a successful installation demands careful consideration of efficiencies, emissions, process optimization, and loss prevention. MAXON provides the most complete line of industrial industrial burners including natural gas burners, low nox burners, and complete industrial burner systems to ensure your successful heating solution. Backed by a worldwide staff of combustion engineers, MAXON is your smart choice for value, reliability, and performance. |
|
|
|
Burners, Accessories
