|
|
| Products 91 to 120 of 281 |
Distinguishing features of the MS-series are consistent modularity, attractive design and straight forward configuration of application-specific service units. Available in three sizes: MS4, MS6, MS12.
• Quick assembly and dismantling
• Safety features integrated as standard
• All compressed air preparation functions in 14 freely combinable individual modules
• Standard combinations available
|
|
Festo plug and work®: extra sturdy, ready-to-install service units, delivering extremely high flow rates for standard applications, e.g. filter regulator, on/off valves, fine filters and micro filters.
• High flow rates up to 12, 500 l/min
• Wide choice of preassembled service units
• Heavy-duty design thanks to metal bowl and sturdy connection technology
• 4 sizes: MICRO, MINI, MIDI, MAXI
|
|
Compressed air is a dependable, flexible and safe energy source. however, the air must be treated before use to ensure that the pneumatic tools last well and works reliably.
An extensive range of filters, regulators, lubricators, pressure gauges, micro-filters, drains, separators and dryers provide solutions for all issues associated with polluants in air pipes.
|
|
Trade name: Moduflex40 FRL
A treatment D `air modular in an obstruction minimal
Technical description:
· Openings G1/8" and G1/4"
Cast solid construction of the filter cartridge for a fast disassembling in a few seconds
Very out of aluminum
· Profit of maximum weight.
Advantages:
· Single system of connection patented "Cliplok"
- Connection between elements without tools and intermediate kits of connection
Range including/understanding filter, regulating pressure, lubricating elements valves of opening/closing, progressive pressurization and cut of air
Complementary options - Purgings manual, semi-automatic and automatic, terminal blocks, kits of mural fixing, kits of connection in air in end and kits of inviolability on regulators.
Applications: Packing Automation Car.
|
|
Metal Work offer a full range of FRL units to meet all possible requirements for compressed air treatment to the user circuit.
The technical choice of the rolling diagram on the Skillair and BIT families ensures top performance. Full modularity of all elements and the variety of accessories available makes it possible to meet the most demanding requirements.
The New deal range combines high reliability and top performance with proven guaranteed technology.
|
|
Combination
C08
Features
• Components Integrated into Single Unit
• Modern Design and Appearance
• Light Weight, Ready-to-Mount Assembly Comes Standard with Flush-Mount Pressure Gauge and Modular T-bracket / Joiner Assembly
• High Flow Capacity
• Quick-Disconnect Bowl / Bowl Guard
Combination
C18
Features
• Components Integrated into Single Unit
• Modern Design and Appearance
• Light Weight, Ready-to-Mount Assembly Comes
Standard with Pressure Gauge and Modular
T-Bracket / Joiner Assembly
• High Flow Capacity
• Quick-Disconnect Bowl / Bowl Guard
• Joiner Assembly / Connector Patent No. 5,383,689
|
|
New developments and improvements are constantly being made to increase the use of this clean burning, efficient fuel. Natural gas comes from underground, and thousands of kilometres of pipeline exists in Europe to transport the gas. Compressor stations located along the length of pipeline move the gas from the wellhead to consumer distribution points.
However, the raw gas from the ground requires processing and refining before it is ready fro use. The installation of Parker filters makes it possible to improve process efficiency and provide optimal process protection. The rigid, graded-density structure of Parker filter products efficiency removes solids and conaminants that would quickly plug competitive filters.
|
|
|
|
|
|
Separators, fine and superfine filtration technology for removal of liquid (e.g. water or oil) and solid
particles down to 1µ from compressed air and gases.
Efficiency at normal capacity: 99,9999% (1µ).
Residual oil content: ≤ 0,5 mg/m3 (1 bar (abs.), 20°C).
Recommended temperature range: 1,5°C - 80°C.
Standard equipment: Complete filter including automatic condensate drain.
CE mark in accordance with the Pressure Equipment Directive97/23/EC (PED) for Fluid Group 2. No CE mark is authorised under Article 3 paragraph 3 for smaller filters or CE mark in accordance with Article 1 paragraph 3.3.
Filters suitable for Fluid Group 1 see page 20.
As an option available DELTATRONIC filter monitoring. Real messurement of filter status incl. software to minimize the operating cost in relation to the differential pressure of each Filter.
Also available:
-Paint compatible filters
-High pressure filters (up to 350 bar ü / 5000 psig)
-Stainless steal filters
-Vent filters
-Filter silencer
-Activated charcoal filter elements
-Sterile- and steam filters
-Filter elements for competitor housings
|
|
Features:
- operates in accordance with the actual condensate quantity
- avoids unnecessary loss of compressed air
- is equipped with a fault signal
- has large cross-section value to prevent emulsification
|
|
DESCRIPTION:
Compressed air drain trap with inbuilt strainer, in full stainless steel construction suitable for draining light moisture loads from air lines.
FEATURES:
Complete stainless steel construction ensures better mechanical and corrosion resistance properties. The disc and seat are hardened by a special induction hardening process with seat harder than disc, to withstand continuous, prolonged
operation.
Specially designed disc makes the trap operate periodically, effectively discharging liquid immediately as it accumulates, even in operating conditions that are characterized by heavy oil contamination.
|
|
Kaeser's Eco-Drain Series of electronic condensate drain traps efficiently eliminate moisture from the compressed air system. They are ideally suited for equipment such as dryers and filters. The capacitance sensor technology ensures that only condensate is released - not valuable compressed air.
Important features and advantages:
Reliable condensate removal in a variety of industrial and commercial environments
Wear-free, capacitance level sensor
Electronically controlled diaphragm valve releases condensate not compressed air
Patented valve technology protects internal components from contamination even in harsh environments
Simple installation and maintenance
|
|
Collecting and eliminating condensates is an active part for improving the quality of your air production.
An efficient drain system eliminates completely the risk to have condensate water in your air network and pneumatic installation.
It is a guarantee of increased lifetime of your equipment and less production rejects.
|
|
Pressure up to 16 bar, temp. range: 1 - 60°C
C A P A C I T Y
Model compressor refrigeration Filter Connection
aftercoooler dryer
ED2002 --- --- 720m³/h G 3/8
ED3004 240 m³/h 480 m³/h 2,400 m³/h 1 x G 1/3, G 1/8
ED3007 420 m³/h 840 m³/h 4,200 m³/h 2 x G 1/2, G 1/8
ED3030 1,800 m³/h 3,600 m³/h 18,000 m³/h 2 x G 1/2, G 1/8
ED3100 6,000 m³/h 12,000 m³/h 60,000 m³/h 2 x G 1/2, G 1/8
Standard version with BSP thread (G) for 230V/50 - 60Hz supply voltage. Alternatively versions NPT thread (N) or 115V/50 - 60Hz or 24V/50 - 60Hz available. 24V DC on request
ecodrain 2000, for pressure up to 50 bar, temp. range 1 - 60°C, intern. heater available!
C a p a c i t y
Model Compressor Refrigeration Filter 2* Connections
aftercooler dryer
ED2010 1,290 m3/h 2,580 m3/h 12,900 m3/h 2 x G 1/2
ED2020 6,000 m3/h 12,000 m3/h 60,000 m3/h 3 x G 3/4
ED2060 66,000 m3/h 132,000 m3/h 660,000 m3/h 3 x G 3/4
|
|
CONDENSATE CLEANER ACR 1
With activated carbon coalescense filter
Specs Compressor capacity (HP, max.) 15
Condensate connection (input, '') 3 x 1/2
Water connection (output, ") 1 x 3/4
Working temperature (min./max., ºC) 5 - 60
Dimensions (l x w x h, cm) 45 x 28 x 21
Weight (kg) 4.3
|
|
|
|
|
|
EPG's CS-16b Condensate Separator
Since 1988, EPG Companies Inc. has built hundreds of its CS series condensate coalescer separator filter silencers for removal of both particulates and liquid droplets from air streams. Its unique up-flow design passes the air stream through a mixed media element which coalesces fine liquid vapor into larger droplets which, by gravity, drop to the bottom of the sump. Those droplets which are too small to overcome the velocity of the air stream are trapped in the separator layers of the media until they become large enough to drop out of the air stream at an efficiency of 99%. As the liquid droplets fall back down through the media pack, they tend to wash particulate matter out of the five (5) micron filter media carrying the particulates down to the sump. Inlet sound levels are absorbed in the CS vessel by change in velocity, direction and recovery trumpet. Typical sound reduction is 8 to 12 dBA. By design, the vessel including media has a pressure drop of only 1 /2" W.C. at maximum air flow. This equates to more energy available for the system.
- 16" diameter, 40 1 /2" high with mounting feet
- Inlet and outlet ports are 4 1 /2" diameter
- Dry weight of the vessel is 130 pounds
- Fifteen (15) gallon sump capacity
- Hot dipped galvanized coated steel
- Access ports for sampling and sensors
- Easy to remove media for cleaning or replacement
- Flow up to 350 SCFM
- Vacuum to 16" HG
|
|
|
With the introduction of the OSM 500 and 900 oil-water separators, with the latest filter membrane technology, Atlas Copco offers a most cost effective, safe, environmentally friendly and simple system to handle condensate from oil-injected compressors, fully in compliance with governmental regulations.
|
|
Features:
Safeguards against oil leaking into the sewage system
Large oil overflow for clotted oils.
No oil backup into the filter
Two-fold filter monitoring: Integrated level
indicator and optical reference turbidity for
comparison of samples.
Optional fault message transmission to a control
system by an electrical alarm sensor on the level
indicator
|
|
|
Splitting plants are indispensable in their main area of application: compressed air systems. BEKOSPLIT® splitting plants clean up emulsified condensates which occur under unfavourable process conditions or with certain lubricant/compressor combinations. In addition to compressed-air condensate, BEKOSPLIT® is also suitable for treating other oil-containing industrial wastewaters: water-insoluble organic impurities oils, vegetable or animal fats and a large variety of solid contaminants can all be removed. Any heavy metals, dirt or paint particles present in the water are reliably adsorbed.
|
|
|
To separate oil from the condensates produced by the lubricated compressors is an environmental need. The purifiers of condensates Atlas Copco recover all types of oily mixtures.
|
|
|
|
|
|
Res-Kem’s Condensate Polishers are high quality industrial systems. They are available in a wide range of self-contained packages configured in single, double and triple unit arrangements.
The white paper, "Condensate Polisher Savings of 23% Realized Through Value Engineering", shows how a value engineering team comprised of personnel from a well-known university, Res-Kem Corp (the equipment manufacturer), and a mechanical contractor yielded the best system for the money.
Standard features of a Res-Kem Sodium Cycle Condensate Polisherare as follows:
- All Stainless Steel Wetted Parts
- Flow Rates up to 710 gpm for single units
- ASME Code Stainless Steel Vessel Designed for 100 psig
- Factory Assembled Stainless Steel Butterfly and/or Aquamatic Valve Nest
- Stainless Steel Hub and Lateral Underdrain
- NEMA 4XFG Electrical Enclosure
- Outlet Water Sample Valve
- Automatic Backwash Flow Controller
- Separate Cold Water Connection for Regeneration Cycles
- High capacity, High Crosslinked Macroporous Cation Resin
- Raw Water Bypass Piping
- Factory, pre-assembled valve nest on each tank
Optional features are as follows:
- Allen Bradley PLC
- Differential Pressure Switch
- Flow Sensor
- Water Sample Cooler
- Manual Isolation Valves
- Skid Assembly
|
|
It is globally recognised that condensate from oil-injected compressors is an oil-water emulsion, classified as oil residue and must not be drained into the sewage system nor into the environment. Legislation, worldwide, has become more and more stringent as to the disposal of this oily waste water.
With the introduction of the OSM 500 and 900 oil-water separators, with the latest filter membrane technology, Atlas Copco offers a most cost effective, safe, environmentally friendly and simple system to handle condensate from oil-injected compressors, fully in compliance with governmental regulations.
|
|
Condensate is a by-product of all compressors. This oil/water mixture also contains particulates and hydrocarbons, and is concentrated during the compression process. Federal and local regulations prohibit discharging this contaminated water into surface drains and municipal water systems. Special handling and disposing of condensate in large volumes can be quite expensive.
The Aquamat system removes the oil and contaminants from the water, reducing the amount of contaminated condensate, and significantly saving on the disposal costs.
Important features and advantages:
Saves about 90% of disposal costs
Pays for itself in a short period of time
Includes test kit to simplify water quality testing
Level sensor indicates filter contamination level allowing planned filter changes
Quick and easy filter changes
Multiple condensate inlet lines for up to four compressors (Models Aquamat 2 and up)
|
|
|
|
|
|
Technology: The oil/water separators form an integral part of compressed air systems as they provide treatment of the condensate, a source of pollution for the environment. The separation of the oil and water in the condensate is provided through natural decanting and active carbon based filtration.
Residual oil content:From 5 to 25 mg/l
Models and Output: 7 models available to provide the optimum solution. Treatment up to 3,500 m3/h depending on the type of oil, service pressure and ambient conditions)
Maximum service pressure:16 bar
Standard equipment: 7 models available.
Corrosion resistant, polyethylene construction. From 2 to 4 inlets for multiple connections. Sampling device for visual comparison test and check on the water quality. Oil collection container.
Key points: Simple installation, use and maintenance.
Effective separation of the oil from the water thanks to a large-dimension expansion chamber. Extended service life of the active carbon filters thanks to the use of pre-filters.
Applications : Suitable for all users seeking a simple and effective condensates treatment solution to prevent any discharge of polluting oil into the environment.
|
|
BD : "The industry benchmark for desiccant dryers"
Incorporating unique, patented technological innovations and extra energy-saving options, Atlas Copco's BD desiccant dryers provide you with the clean, dry air you are in need of to expand the life of your equipment and ensure the quality of your end product.
- Dry air at any time
- Supreme energy efficiency
- Easy installation, Complete design, Plug & Play
- Advanced Control & Monitoring Solutions
- The Reliable choice
- Proven Peace of Mind
- Built for Endurance
|
|
|
Ingersoll Rand’s heatless desiccant dryers deliver superior compressed air quality at a constant -40°F to -100°F (-40°C to -70°C) pressure dew point. Our heatless dryers are simple to operate, dependable and very economical.
|
|
Clean Air System
- Removes water vapor at the point of use
- Desiccant changes color when it needs to be change or recharged
- Outlet screen keeps desiccant particles out of tools
- Oil Removal filter removes 99.9 % of all oil aerosols
- Easy Maintenance
|
|
BD : "The industry benchmark for desiccant dryers"
Incorporating unique, patented technological innovations and extra energy-saving options, Atlas Copco's BD desiccant dryers provide you with the clean, dry air you are in need of to expand the life of your equipment and ensure the quality of your end product.
- Dry air at any time
- Supreme energy efficiency
- Easy installation, Complete design, Plug & Play
- Advanced Control & Monitoring Solutions
- The Reliable choice
- Proven Peace of Mind
- Built for Endurance
|
|
Champion Dessicant Dryers
CDT Series
Heatless Desiccant Compressed Air Dryers For pressure dew points of +38°F to -100°F, (+3°C to -73°C)
Basic Controller:
* The basic controller presents a traditional heatless drying
system.
* Using a simple timer based controller, it offers a reliable
fixed cycle operation.
* Automatic time controlled bed regeneration cycles offer
consistent performance.
* The controller LEDs reflect: power on, left tower drying,
right tower drying.
Standard Controller Features:
* Four dew point selections
* State-of-the-art Controller
* Purge Optimizer
* Programable shut-down capabilities
* Dew point performance per ISO 8573.1
|
|
* Atmospheric Dew Points as Low as -100°F
* No Electrical Connection Necessary
* Twin Units Available for Double Service Life
* Color change of the Desiccant provides an instant status of the Compressed Air System
|
|
|
|
Pneumatic filters, Compressed air treatment
