|
|
JUN-AIR has introduced a wide variety of accessories for the compressors to comply with the requirements of the user, resulting in increased satisfaction and efficiency.
JUN-AIR offers a wide range of filters, automatic drains, fans, trolleys etc.
|
|
Mattei produces also accessories for compressed air, as such as filters, condensate separators, dryers and vertical receivers.
The filters for compressed air absorb oil and dust. The condensate separators and the dryers avoid water and humidity.
The installation of an air receiver allows an improved pressure steadiness inside the air system, provides for possible peaks in the air demand, and it optimises the operation of the linked compressor.
|
|
Clean and dry compressed air: it is vital to power up your busy production environment. Containing moisture, aerosols and dirt particles, untreated compressed air poses a substantial risk as it can damage your air system and end product.
Incorporating unique, patented technological innovations and extra energy-saving options, Atlas Copco's FD refrigerant dryers provide you with the clean, dry air you are in need of to expand the life of your equipment and ensure the quality of your end product.
|
|
The operation of compressed air systems with conventional adsorption dryers suffers from system-related pressure drop. This deficiency needs to be compensated via an increased compressor performance, this requiring a higher energy demand.
Cold-regenerated DRYPOINT® AC adsorption dryers offer a convincing solution to the problem:
BEKO has developed an adsorption dryer which limits the pressure drop to an average of only 0.25 bar, including the pre- and final filters.- Compared with conventional constructions, this represents an improvement of over 50%.
|
|
BOSSMAN Heatless dryers unique features
Supplied as a complete unit, which is ready for use.
Low initial cost. The heatless method contributes to low maintenance and is most reliable.
They are self-regenerative and produce low levels of noise.
The specially designed digital electronic control for the variable cycle of adsorption dryer allows automatic switching off of the regeneration air.
This resulting in a lower cost expenditure.
The specially designed high -efficiency dryers can be used in all
applications,and the regeneration air flow can be adjusted to suit the
particular operating conditions.Therefore running cost reduced
The specially mixed adsorption medium ensures a longer life to the unit.
Fully automatic systems work continuously gives uninterrupted airflow.
It requires only 230V,AC power supply to operate the system.
Even if power fails it giving uninterrupted air flow.
|
|
- Reliable operation with standard components tested for continuous service.
- The compact dryer can be installed on the fl oor (fl oor mounted kit as standard).
- The inlet prefi lter FMM and the outlet postfi lter FPRE, have to be mounted on the air distribution line. The fi lters are included but not pre-mounted.
Technical Info
- Capacities from 1917 up to 7800 l/1’ at 7 bar.
- Standard dew point -40°C.
- Max. working pressure 16 bar.
- Working pressure range 4 - 16 bar.
|
|
|
Aquasorb A-30B/Bp is a sorption dehumidifier that condenses out the moisture. The chassis is made of stainless steel, which is especially important in condensing units. The rotor is, as always, washable, all energy is accumulated in the dry air. Aquasorb operates at dew-points below 0°C.
|
|
Xebec's line of adsorption dryers makes it easy to comply with evolving energy conservation requirements. A base model design supported by three progressive upgrades makes ADX Solutions a smart investment that pays off in world class performance and long-term peace of mind.
DESIGNED TO MEET ENERGY CONSERVATION NEEDS TODAY
Xebec's common platform design allows any dryer to be upgraded to the most efficient model available while maintaining the same outlet flow. Select a low cost Heatless model today and upgrade to an energy efficient Vacuum Regenerated Dryer tomorrow.
|
|
Solid performance
_Steady pressure dew point
_No freezing of condensed moisture
_No chance of moisture entering the compressed air system.
Simple reliability
_Quality components, generously sized
_Simple and proven design
_Effective control system (hot gas bypass).
|
|
As quality air from an oil-free air compressor is the requirement for your application, so dry air is equally desirable. For a quality end product and reliable production process Atlas Copco offers the unique range of MD adsorption dryers, specially designed to work with proven oil-free air Z-compressors.
Clean, oil-free, dry air
A reliable production process
A quality end product
Easy installation, delivered complete with piping to reduce costs
No loss of compressed air
Oil-free air condensate
Safeguarding the compressed air net
Oil-free Z-compressor / MD dryer - a proven and reliable combination
A cost-effective design
|
|
BD : "The industry benchmark for desiccant dryers"
Incorporating unique, patented technological innovations and extra energy-saving options, Atlas Copco's BD desiccant dryers provide you with the clean, dry air you are in need of to expand the life of your equipment and ensure the quality of your end product.
Dry air at any time
Supreme energy efficiency
Easy installation, Complete design, Plug & Play
Advanced Control & Monitoring Solutions
The Reliable choice
Proven Peace of Mind
Built for Endurance
|
|
|
|
|
|
Technology: Adsorption Dryers.
Operating principle: Designed for extracting humidity from compressed air, these dryers consist of aluminium columns each of which contains two twin chambers filled with a desiccant agent which dries the compressed air crossing over it. When a chamber is in service (drying phase), the other is in regeneration mode.
Flow rates treated:
From 5.1 m3/h to 34 m3/h
Pressure Dew point:
- 40°C as standard
- 70°C optional
Standard equipment:
Integral high efficiency oil removal SCH filter and 2-in-1 type cartridge (consisting of SCR anti-particle filter and desiccant).
Electronic display with operating condition by LED and audible alarm. Condensates removal by integral pipes.
Corrosion-resistant protection by epoxy painting and alocrom treatment.
Regeneration method:
By pressure variation: a small quantity of the treated compressed air is taken to regenerate the saturated desiccant agent. The dilatation of that air which changes from the circuit pressure to atmospheric pressure provides the means for extracting the humidity absorbed by the desiccant and thus for regenerating it. The humidity is then dispersed into the atmosphere through the exhaust silencers.
Key points: Installation at the point of use: supply of dry air right where it is needed. Easy installation, small dimensions and reduced noise level. Fast, simple maintenance.
Applications:
Suitable for all users wanting to obtain dry compressed air for a specific application, thus avoiding unnecessary and costly full treatment of the whole of the air network.
|
|
|
|
|
|
Technology : Adsorption Dryers.
Operating principle: Designed for extracting humidity from compressed air, these dryers consist of aluminium columns each of which contains two twin chambers filled with a desiccant agent which dries the compressed air crossing over it. When a chamber is in service (drying phase), the other is in regeneration mode.
Flow rates treated:
From 40 m3/h to 2040 m3/h
Values given for a pressure of 7 bar and aspiration at 1 bar and at 20°C.
Pressure Dew point:
- 40°C as standard (SM and SMH models)
- 20°C optional (SM230 to SM1200 models only)
- 70°C optional (SM and SMH models)
Standard equipment:
High resistance extruded aluminium construction. Humidity indicator for monitoring the quality of air supplied. Fast re-pressurisation valve providing easy commutation and improving reliability.
Regeneration method: By pressure variation (SM models) and temperature variation (SMH models): the saturated desiccant agent is regenerated using a small quantity of the treated compressed air (SM models) with an additional heat contribution through heating elements (SMH models only). The dilatation of that warm air which is changed from the circuit pressure to atmospheric pressure provides the means for extracting the humidity absorbed by the desiccant agent and thus for regenerating it. The heating elements (SMH models only) provide the means for significantly reducing the quantity of dry air used and at the same time the dryer's operating cost.
|
|
Moisture and dust that are naturally present in air can lead to premature deterioration of your pneumatic equipment, and increase the risk of product spoilage.
The DB adsorption dryer range guarantee delivery of dry, clean air that will satisfy even the most sensitive applications.
It’s a global solution for any demanding air treatment.
|
|
Submicron Filtration for the Cyclotron or Other Dust Collectors
Filter 1's Safety After-Filters are designed to attach to the Cyclotron Separator and will remove even sub-micron sized particles, meeting OSHA requirements for circulating filtered air as well as EPA standards when venting to the outdoors. As custom specialists, Filter 1 also provides after-filters as needed to fit various dust collection systems.
Features:
- High suction velocity
- High efficiency at collecting dust
- Large filter area
- Seared felted polyester filter material
- Benefits
- Low operating cost
- Easy to service and maintain
- Large dust holding capacity
|
|
Features :
• Modern Design and Appearance
• 0.5 Micron Element
• Light Weight
• High Flow Capacity with Minimal Pressure Drop
|
|
Air Cleaners / Housings
Donaldson recommends the use of our housings with RadialSeal%u2122 sealing technology for compressors. Our FPG style housings are ideal because they%u2019re reliable, durable, plastic and easy to service. Many air cleaners are stock product, but custom design support is also available.
|
|
The equipment made by LTA Industrial Air Cleaning can be divided into four main categories.
Source extraction:
contaminated air is extracted right at the source and cleaned.
Group extraction:
contaminated air from a group of machines is collected and cleaned locally.
Central exhaustion:
air to be cleaned is collected by a duct system, cleaned in a central system, and exhausted.
Industrial room air cleaning:
when operating open machines or to meet strict regulations on air purity, building air cleaning can be used.
Further differentiation of the precipitation types is possible between electrostatic or solid media filtration.
|
|
|
|
|
|
Radial Seal Air Filters
Unique design advantages not only improve strength and ease of service, but contaminant holding capacity and removal efficiency as well. These advantages make Baldwin Radial Seal air filters the best choice as the aftermarket replacements for popular applications.
The Baldwin Design
Every Baldwin air filter is designed to have an efficient balance of three important characteristics maximum efficiency, minimum initial restriction and cost-effective service life.
The primary components of a typical heavy-duty Radial Seal air filter are the seal, molded ends, inner and outer metal wrappers and the media. The metal wrappers protect the filter media and provide structural strength for the completed filter. With 73 percent of the surface area of all Baldwin metal wrappers open, minimal air flow restriction is attained.
The most important part of the air filter is the media. Baldwin ensures maximum strength and minimum restriction through its PermaPleat design. PermaPleat is a special embossing process, which creates built-in pleat spacing in the media. This adds extra stability and separation to prevent pleats bunching together from incoming air.
|
|
Atmospheric air contains already in its origin impurities like: dust, various forms of hydrocarbons and water in form of humidity, which once sucked by the compressor is compressed and delivered to the line together with eventual oily particles. These polluting agents, interacting among each other, may generate abrasive and corrosive emulsions able to damage the distribution lines, the pneumatic devices and the product itself.
This leads inevitably to:
- Leakages of air in the piping
- Greater maintenance costs for the machine using it
- Production decrease
- Loss in product quality and corporate image
LINE FILTERS of Ceccato Aria Compressa S.p.A. can hold and remove those polluting agents that can damage the regular operation of the production cycle.
|
|
Cartridge filter FL
Item#FL
Cartridge filter complete with painted steel protection to protect the filtering component from atmospheric agents.
|
|
- Model / code: F509
- Body Material: Brass or stainless steel
- Inlet Pressure: 280 and 420 bar
- Connections: inlet port: 3/8 female
- outlet: 1/4 and 3/8 BSPP male/female
- Internal Ø: 6 and 6,5 mm
- Filtration available: sintered s.s. 5 and 14µ
- clothed s.s. 5, 10, 25µ
- sintered bronze 25µ
- Category: Filter
|
|
|
|
|
|
Filtering liquids or air in hostile environments-such as those subject to temperature extremes, high orders of shock/vibration, and caustic fuels or fumes-has posed problems for paper filter elements. These types of elements simply will not withstand these types of operating conditions.
Since paper filters are typically composed of organic materials, they are also subject to attack by the caustic byproducts of many industrial processes- such as those involving combustion. For example, corrosion often takes place when high-temperature lubricating oils are loaded with such acids. After extended use, the surface area of the paper filter becomes heavily loaded, resulting in filter weak spots. (If the pressure relief valve is not set low enough, and the pressure is allowed to remain at normal operating pressure [500 to 700 kPa], paper filter elements may tear, fracture, or even burst.)
Sintered metal filters-due to their granular construction-are also prone to fracture or disintegration when subjected to the stresses of high temperature and shock. Unless the fusion process involved in their construction is 100% complete, small particles may begin to break away. As a result, when installed on either rotating or reciprocating machinery, little particles of filter material very frequently detach and migrate to block the very devices the filter was designed to protect.
|
|
Air Inlet Filters
Mikropor air filters are the first line of defense for a compressor and have the biggest impact on the service life of the compressor, lubricant, air/oil separators and oil filters. Mikropor offers high efficiency air intake filters which outperform all existing air filters on the market. This performance results in longer service life of the air/oil separator, lubricant and oil filter - delivering more value to customers.
Mikropor NanoFiber Media Air Filters: Our high performance NanoFiber Media air filters reach a 99.99% initial efficiency faster than cellulose air filters and provide better protection by allowing fewer contaminants to pass through the media. Mikropor Nano Media holds up to 5 times more contaminants than conventional cellulose air filters, making them ideal for extended maintenance intervals.
|
|
Trade name: ECO III
Filtration of the air of admission - News approaches
Advantages:
- Not need for supports to measure
- Important Profit of time and money
- Output raised for small overall dimensions
it system of air filtration can be close to the turbo-compressors
- Profit of output
- By its reduced dimensions, releases from space in the driving compartment.
Applications:
- Road vehicles including the buses
- Specialized Applications, practically including all the types of vehicles and installations.
|
|
Lubricator
L03 EconOmist
Features
• Proportional Oil Delivery over a Wide Range of Air Flows
• Precision Needle Valve Assures Repeatable Oil Delivery and Provides Simple Adjustment of Delivery Rate
• Ideal for Low and Ligh flow Applications with Changing Air Flow
• Transparent Sight Dome for 360° Visibility
Lubricator
L18
Features
• Integral Sight Dome and Adjustment Knob
• 1/2" NPT / BSPP-G Over-port
• Fillable Under Pressure
• Quick-disconnect Bowl / Bowl Guard
• Manual Drain
• High Flow Capacities
|
|
|
This range of filters has been designed for use on machines for which excellent suctioned air filtration is essential. The filter cartridges are of such dimensions as to assure the stated capacity values with a minimum pressure drop; however, in the case of heavy-duty operations, we recommend that the capacity be calculated as being 2/3rds of that indicated. We can alter the “C” length for threaded attachment types, on request.
|
|
This after-filter retains polluting particles thanks to the following main filtration effects: diffusion, inertia and direct interception.
It is recommended for those machining processes producing fine mists from soluble oil mixed with dusts (especially of conducting materials: e.g. cast iron processes, pressure die-casting etc.).
Our after-filter is available in various models with two different levels of efficiency:
EU9 and EU13. The last one is able to retain also some smokes.
The fibreglass after-filter can be used in combination with the three kinds of air filters (turbine single and double centrifuge) and with all our modular filtration units.
|
|
Vertical or Horizontal constructions mounted on legs or skirts.
Designed to international Pressure Vessel Codes and Standards.
These filters have multiple cartridges securely mounted with the vessel.
Cartridges offered can be of various types of construction depending on the application i.e. Pleated, wound or all metal construction.
Access to the internals can be via a Quick Opening Closure or Bolted Cover.
Flow passes through the cartridges in an in - to out flow direction.
We are able to offer elements that will accept a high differential pressure before mechanical damage can occur.
|
|
Cartridge filters
Automatic compressed air cleaning filters
Bagging filters with polypropylene bags
Self-cleaning filters with closed-circuit storage of waste in collectors
|
|
|
|
Pneumatic filters, Compressed air treatment
