|
|
Solid performance
_Steady pressure dew point
_No freezing of condensed moisture
_No chance of moisture entering the compressed air system.
Simple reliability
_Quality components, generously sized
_Simple and proven design
_Effective control system (hot gas bypass). |
|
As quality air from an oil-free air compressor is the requirement for your application, so dry air is equally desirable. For a quality end product and reliable industrial production process Atlas Copco offers the unique range of MD adsorption industrial dryers, specially designed to work with proven oil-free air Z-compressors.
Clean, oil-free, dry air
A reliable production process
A quality end product
Easy installation, delivered complete with professional piping to reduce costs
No loss of compressed air
Oil-free air condensate
Safeguarding the compressed air net
Oil-free Z-professional compressor / MD dryer - a proven and reliable combination
A cost-effective design
|
|
BD : "The industry benchmark for desiccant dryers"
Incorporating unique, patented technological innovations and extra energy-saving options, Atlas Copco's BD desiccant professional dryers provide you with the clean, dry air you are in need of to expand the life of your equipment and ensure the quality of your end product.
Dry air at any time
Supreme energy efficiency
Easy installation, Complete design, Plug & Play
Advanced Control & Monitoring Solutions
The Reliable choice
Proven Peace of Mind
Built for Endurance
|
|
The operation of compressed air systems with conventional adsorption industrial dryers suffers from system-related pressure drop. This deficiency needs to be compensated via an increased compressor supplier performance, this requiring a higher energy demand.
Cold-regenerated DRYPOINT® AC adsorption dryers offer a convincing solution to the problem:
BEKO has developed an adsorption dryer which limits the pressure drop to an average of only 0.25 bar, including the pre- and final professional filters.- Compared with conventional constructions, this represents an improvement of over 50%. |
|
Legendary DHA Series and CDA Series Heat-Les™ Dryers
(60-1,600 scfm)
Critical applications and hostile environments challenge common industrial drying designs. DHA Series (-40°F) and CDA Series (-100°F) dryers deliver unrivaled performance and reliability through standard and customized orientations. Pre-configured dryer packages range from a basic fixed-cycle unit to a high pressure, corrosion-resistant model. Every unit we build incorporates our AMLOC® energy management system to assure long component life cycles and maximum energy savings
|
|
Moisture and dust that are naturally present in air can lead to premature deterioration of your pneumatic equipment, and increase the risk of product spoilage.
The DB adsorption industrial dryer range guarantee delivery of dry, clean air that will satisfy even the most sensitive applications.
It’s a global solution for any demanding air treatment.
|
|
Clean and dry compressed air: it is vital to power up your busy production environment. Containing moisture, aerosols and dirt particles, untreated compressed air poses a substantial risk as it can damage your air system and end product.
Incorporating unique, patented technological innovations and extra energy-saving options, Atlas Copco's FD refrigerant professional dryers provide you with the clean, dry air you are in need of to expand the life of your equipment and ensure the quality of your end product. |
|
Absorption Compressed air dryer (heatless purge and externally heated purge)
1). Heatless purge absorption/desiccant manufacturers of air dryer
Inlet temperature: 0~45 celsius degree
Inlet oil content: ¡Ü0.01ppm
Working pressure: 0.6~1.0Mpa
Dew point: -20~-70 celsius degree
Purge air: ¡Ü12%
Desiccant: Activated industrial alumina & molecular sieve
Purge mode: Heatless purge
Working method: Continuing alternation between two towers
Working periods: T=10~20min.
Control mode: Micron computer auto controlling
Installation mode: Indoor, non-basement
2). Externally heated purge absorption/desiccant air professional dryer
Inlet temperature: 0~45 celsius degree
Working pressure: 0.6~1.0Mpa
Dew point: -40~-70 celsius degree
Purge air: ¡Ü4~6%
Desiccant: Activated alumina & molecular sieve
Purge mode: Externally heated purge
Working method: Continuing alternation between two towers
Working periods: T=120~140min.
Control mode: Micron computer auto controlling
Installation mode: Indoor, non-basement |
|
P-2000 Series High Performance Professional filters for Compressed air & Gas
(35 to 15,000 scfm)
State-of-the-art filtration media, CAD engineered designs and ISO 9001 manufacturing practices combine to produce the P-2000 Series of compressed air filter products. The result is a product unmatched in value-Long element life, high contaminant removal efficiencies and low differential pressure drop at a system price you can afford.
Contaminants in your compressed air and gas system dramatically increase your operating cost. Dirt, moisture, oil, hydrocarbons, gases and bacteria aggressively attack, corrode and erode your piping system, controls, instruments and tools. Maintenance and repair costs escalate dramatically. P-2000 Series filters remove these harmful contaminants from your system utilizing the follow features:
Pleated filtration media used in both coalescing prefilters and particulate afterfilters, offering 6 to 9 times the surface area found in "wrapped" or "depth-style" elements.
Coalescer liquid removal efficiency of 0.001 ppmw based on 20 ppmw challenge. Removes liquid aerosols down to 0.01 micron.
Particulate filters have a 100% absolute removal rating down to 0.9 micron.
Single element, aluminum housing design 35 to 1,200 scfm.
|
|
Clean and dry compressed air: it is vital to power up your busy production environment. Containing moisture, aerosols and dirt particles, untreated compressed air poses a substantial risk as it can damage your air system and end product.
Incorporating unique, patented technological innovations and extra energy-saving options, Atlas Copco's CD professional dryers provide you with the clean, dry air you are in need of to expand the life of your equipment and ensure the quality of your end product. |
|
Pneumatics always contains moisture, traces of compressor oil and dust particles.
These impurities can lead to serious problems. Corrosion pockets or deposits build up in air tools and equipment. This makes them operate less efficiently and reduces the quality of the products manufactured. Maintenance work becomes necessary and costly downtimes occur. |
|
The demand for 100% clean and dry air is becoming more and more essential because of both environmental demand and in order to prolong the lifetime of your equipment requiring pneumatics.
To ensure both clean and dry compressed air, JUN-AIR offers three types of industrial dryers: adsorption dryers, membrane dryers and CO2 dryers, which are - unlike many types of dryers in the market - designed for continuous operation.
|
|
high quality air for laboratories, food processing, robotics, telecommunications, professional laser applications
electronic instrumentation and control
compressed air systems operated at temperatures of less than 3°C
sawmills, ready-mix concrete plants, quarries, chemical and pharmaceutical industries
ALC adsorption professional dryers provide hi|gh efficiency continuous operation. Upline and downline filtration with automatic purge are fitted as standard, enabling the dryers to provide dry, dust-free air.
Advantages of ALC dryers:
Dependable continuous operation at maximum capacity
Desiccant changes colour when saturated, enabling the dew point to be monitored
Low pressure drop
Columns pressurised regularly and progressively ensuring constant output pressure and long desiccant life
Tough, compact epoxy-coated steel casing
High quality industrial silencers keep noise levels below 78 dB(A)
Upline fiitration: 0.01 micron with submicron professional filter, downline filtration: 1 micron
Simplicity and low maintenance costs. No-mess desiccant cartridges are quick to replace. |
|
Legendary DHA Series and
CDA Series Heat-Les™ Dryers
(60-1,600 scfm)
Critical applications and hostile environments challenge common industrial drying designs. DHA Series (-40°F) and CDA Series (-100°F) dryers deliver unrivaled performance and reliability through standard and customized orientations. Pre-configured dryer packages range from a basic fixed-cycle unit to a high pressure, corrosion-resistant model. Every unit we build incorporates our AMLOC® energy management system to assure long component life cycles and maximum energy savings
|
|
Drying Systems - LFT/LFE/LFA Series
Ultra Air Heatless Regenerative Professional dryers delivers a -40 F PDP, a dewpoint lower than that required by the Instrument Society of America. In colder climates, weather can negatively affect productivity by literally freezing and completely blocking outdoor air lines. Instrument air requires a quality of air that only a Regenerative type dryer can deliver. Therefore, whenever lower dewpoints are required for outdoor piping, instrument air, process air or gas drying, the Ultra Air Regenerative Dryings are the perfect solution.
Features:
Generous quantities of activated industrial alumina desiccant
Centrally mounted pressure gauge specifications and relief cocks on each tower
ASME inspected and stamped and CRN registered pressure vessels (100 CFM and above)
Purge air mufflers to reduce exhaust noise
115-160, NEMA 4x electrical
Repressurization of regenerating tower before it goes on drying cycle to prevent desiccant dusting.
-40º F pressure dewpoint (lower dewpoint available)
Control professional air filter
Low pressure drops (3PSID maximum)
Fail safe mode
Dryer sequence lights
Reliable and proven inlet air control valves and purge valves assure years of reliable shifting of towers and proper dryer operation (Lifetime Warranty) LF Series 25-620 CFM.
1 year warranty
NEMA 4x |
|
Low Dew Point Combined Compressed air drying
Working pressure: 0.6~1.0Mpa
Pressure drop: ¡Ü0.05Mpa
Inlet temperature: Less than 45 celsius degree (Normal temp. Type)
Inlet temperature: Less than 80 celsius degree (High temp. Type)
Dew point: -40~ -70 celsius degree
Cooling watre temperature: ¡Ü32 celsius degree(water cooling type)
Purge air: 3~5%
Control mode: Micro-program controller
Installation mode: Indoor, non-basement |
|
Supplier of air treatment system: professional filter, regulator, lubricating
- A modular, compact range for all types of pneumatic circuits
- Quick mounting and connection on installation: filter, regulator and lubricator functions in a "single unit"
- Lightweight and robust for direct professional fitting on rigid conduits
Accessories: Softstarter cut-off cocks, padlockable manual isolating valves, bypass modules.
|
|
| The professional filters Atlas Copco stop the particles (dust, vapors of oil, water droplets) harmful with the network of compressed air and the processes. Clogging indicator or differential pressure gauge, float drainer or electronics, audible alarm in the event of disassembling under pressure make them practical and sure. |
|
After compressing the air, the concentration of particles and moisture increases. This creates an abrasive mixture that can cause extensive damage.
Instruments and tools can malfunction, spray painting and breathing air can be rendered unusable, maintenance costs will increase and products will be spoiled.
The range of Atlas Copco's DD - PD - DDp and QD industrial filters, when used in the correct combinations, will provide high quality air from 9 to 7200 l/s at nominal working conditions. |
|
After compressing the air, the concentration of particles and moisture increases. This creates an abrasive mixture that can cause extensive damage.
Instruments and tools can malfunction, spray painting and breathing air can be rendered unusable, maintenance costs will increase and products will be spoiled.
The range of Atlas Copco's DD - PD - DDp and QD industrial filters, when used in the correct combinations, will provide high quality air from 9 to 7200 l/s at nominal working conditions.
|
|
After compressing the air, the concentration of particles and moisture increases. This creates an abrasive mixture that can cause extensive damage.
Instruments and tools can malfunction, spray painting and breathing air can be rendered unusable, maintenance costs will increase and products will be spoiled.
The range of Atlas Copco's DD - PD - DDp and QD professional filters, when used in the correct combinations, will provide high quality air from 9 to 7200 l/s at nominal working conditions.
DD range:
Coalescing and particulate filters for general purpose protection, removing liquid water and oil aerosol to 0.1 mg/m (0.1 ppm) and particles down to 1 micron.
DDp range:
Particulate filters for dust protection, removing particles down to 1 micron.
PD range:
High efficiency coalescing and particulate filters, removing liquid water, oil aerosol to 0.01 mg/m (0.01 ppm) and particles down to 0.01 micron.
QD range:
Active carbon filter for removal of oil vapours and hydrocarbon odours with a maximum remaining oil content of 0.003 mg/m (0.003 ppm) to be installed after a PD filter.
|
|
Features:
- Integrated monitoring of the useful lifetime of the professional filter element to automatically indicate the optimal time of element change
- Easily readable, informative display
- Potential free contact for relaying a fault signal to a control centre
- Condensate discharge at the rear through elbow supplier of connector, ideal for installation close to a wall |
|
Compressed air filtration
Sizes Available: Miniature Series 1/8", 1/4" NPT, Compact Series 1/4", 3/8", 1/2" NPT, Large Series 1", 1-1/2" NPT
General purpose professional filter removes water, dirt and dust from the air line.
Manual and Automatic drain types available. The automatic drain operates only when flow change occurs.
Bowl available in transparent polycarbonate or metal zinc die cast.
Filter Element size: Miniature: 5, 25, 100 micron, Compact: 5, 25, 50 micron, Large: 5, 50 micron |
|
|
|
Pneumatic filters, Compressed air treatment
