|
|
|
Aerzen High-Pressure Blowers are equipped with a compression-proof housing (PN 25). Driving shaft and conveying chamber sealed by various sealing combinations. Direction of flow vertical to the bottom. Drive via direct coupling with motor or via flexibly coupled spur gear.
|
|
Breezy Bud, Inc. has devoted itself since its founding to manufacturing high quality industrial blowers and fans. Our customers appreciate our dedication to working with them to produce a blower that meets their requirements.
Our blowers are engineered to run continuously trouble-free. Our blowers have a number of features that contribute to our blower's efficiency and long operating life. Some of these features include high quality materials expertly assembled, ease-of-maintenance, low vibration, and low noise operation. Listed below are some of the types of blowers that we manufacture:
-Casting Multi-Stage Centrifugal Blower
-Casting Single-Stage Centrifugal Blower
-Clean Room Fan
-Conveyor Blower
-Corrosion Resistance Blower (Titanium, Hastelloy, etc)
-Cutter and Trim Blower
-Gas-Tight Booster (1~15kg/cm2G, depend on system required.)
-Gas-Tight Blower
-High Temperature Resistance Blower 900℃
-Spark Resistance Blower
-Wear Resistance Blower
|
|
If high air pressure is required, AIRPACK is the right answer. With high static pressure of up to 24 kPa at 50 Hz and 28 kPa at 60 Hz, the AIRPACK high-pressure blower offers unbelievable performance. With the appropriate accessories, several Leister air heaters can be supplied.
• High pressure
• Sound-suppressed
• Continuous operation
• Can be fitted in every position
• Air-inlet and outlet adapter can be mounted on both sides of the turbine
|
|
DESCRIPTION: Single Stage, High-Speed Centrifugal Compressor, Oil-Less, Spindless Design.
DRIVE SYSTEM: DirectDrive™ Technology (Patent Pending), Impeller directly coupled to Motor Shaft with Variable Speed Frequency Drive Control. Integrated Motor Protection, Maximum Air Inlet Temperature: 150ºF [60ºC]
CONSTRUCTION: A356-T6 Alluminum, 79lbs. [36kg]
HIGH-SPEED MOTOR: TEFC, IP54, External Junction Box, 15/20HP [11/15kW] 3-Phase, 190-600VAC, 50/60Hz, 105ºF [40ºC] Ambient.
VARIABLE FREQUENCY DRIVE: IP20 (IP66 Availabl dame), 15/20HP [11/15kW] 3-PMI/RFI Electrical Filter, Digital & Analog I/O, Network Communication.
|
|
New York Blower Pressure Blowers lead the industry in efficient, stable performance and overall customer value. Pressure Blowers are used in a variety of process and environmental applications where low volumes and high pressures are required. Examples include pneumatic-conveying, soil remediation, combustion and numerous high-pressure, gas-handling systems.
|
|
Breezy Bud, Inc. has devoted itself since its founding to manufacturing high quality industrial blowers and fans. Our customers appreciate our dedication to working with them to produce a blower that meets their requirements.
Our blowers are engineered to run continuously trouble-free. Our blowers have a number of features that contribute to our blower's efficiency and long operating life. Some of these features include high quality materials expertly assembled, ease-of-maintenance, low vibration, and low noise operation. Listed below are some of the types of blowers that we manufacture:
-Casting Multi-Stage Centrifugal Blower
-Casting Single-Stage Centrifugal Blower
-Clean Room Fan
-Conveyor Blower
-Corrosion Resistance Blower (Titanium, Hastelloy, etc)
-Cutter and Trim Blower
-Gas-Tight Booster (1~15kg/cm2G, depend on system required.)
-Gas-Tight Blower
-High Temperature Resistance Blower 900℃
-Spark Resistance Blower
-Wear Resistance Blower
|
|
Ionized air blower for static neutralization
ELCOWA's ECOBLOWER 350-C has been designed to efficiently remove static charges from a distance. It is built in a robust painted steel cabinet enclosing the high voltage power supply, tangential fan, and a blowing nozzle in which three shockless ionizating bars. The pivoting mounting bracket makes it easy to install and adjust. The ionization blower ECOBLOWER 350-C is a compact, self-contained unit ready for service. As the high voltage power supply is incorporated into the blower, there is no high voltage cable nor remote power supply, reducing electrical hazards.
|
|
|
Where air is required to affect static removal at a distance and compressed air is not available, the Ion Blower can be used with either the standard Model RN static bar or the extra powerful Model VS bar.
|
|
|
|
|
|
Dual Anti Static Blowers
H&O Single Ionising Air Blower is designed for the neutralization of the static charges which cause some serious problems. High technology used in design can produce more efficient results for static electric problems even in high-speed applications. It provides high performance and efficient ionization with fast discharging time. Blower seperates air molecules to the positive and negative ions by the electric field it generates and transports them.
Any static charged product passed from the efficient distance of the Air Blower will draw the opposite charged ions and neutralize the product. This will prevent the sticking of products to other products or parts of machines.At the same time electrical shocks, explosions, fire danger and dust attraction of which is caused by static electric will be prevented.
Thanks to Air Blower which doesn't need any calibrations and can be cleaned and cared easily. Machines will perform hygienic, safe and high quality production with high performance without problems. There is one fan in Air Blower for increasing ionization distance and supplying enough air flow. System can be mounted to places which are hard to reach by the connection apparatus that is provided on the system. Blower filters should be cleaned occasionally.
|
|
|
Plastics attract dust due to static electricity. The dust particles stick firmly to the surface, which makes it difficult to remove them. Due to their configuration, numerous plastic products have to be neutralised from a distance. For this purpose, SIMCO has developed ionising air blowers. The emitter points of the anti-static bar ionize the air which is blown towards the electrostatically charged object. The part is then neutralised by the ionized flow.
|
|
EXAIR static eliminators neutralize static electricity charges in a wide variety of industrial processes. Anti-static products eliminate static cling that causes dust attraction, jams and tearing. Materials such as paper, plastic and textiles normally contain an equal number of positive and negative charges - that is, they are electrically charged. This static charge causes the following problems:
* Dust clinging to product
* Product clinging to itself, rollers, machine beds or frames
* Materials tearing, jamming or curling
* Sheet feeding problems
* Hazardous sparks or shocks
|
|
The name says it: with 61 dB(A), the SILENCE blower is a pussyfooter – and offers very respectable performance. Along with all Leister blowers it is well known for its dependability.
• Low noise emission
• High air flow
• Continuous operation
• Can be fitted in every position
|
|
TB-125X5T
Breezy Bud, Inc. has devoted itself since its founding to manufacturing high quality industrial blowers and fans. Our customers appreciate our dedication to working with them to produce a blower that meets their requirements.
Our blowers are engineered to run continuously trouble-free. Our blowers have a number of features that contribute to our blower's efficiency and long operating life. Some of these features include high quality materials expertly assembled, ease-of-maintenance, low vibration, and low noise operation. Listed below are some of the types of blowers that we manufacture:
-Casting Multi-Stage Centrifugal Blower
-Casting Single-Stage Centrifugal Blower
-Clean Room Fan
-Conveyor Blower
-Corrosion Resistance Blower (Titanium, Hastelloy, etc)
-Cutter and Trim Blower
-Gas-Tight Booster (1~15kg/cm2G, depend on system required.)
-Gas-Tight Blower
-High Temperature Resistance Blower 900℃
-Spark Resistance Blower
-Wear Resistance Blower
|
|
The impeller, with small fins, turns inside the side channel causing that the air is compressed and accelerated, creating small vortexes of air that are drawn by the blades from the intake to the exhaust.
There are no parts in contact between the stator and rotor; this means the blowers do not need lubrication nor routine maintenance.
|
|
Insulation Blowers - SERIES 100/300 - Powerful, Portable All-Fiber Performance
Meyer's SERIES 100 and SERIES 300 insulation blowing machines provide versatile and portable alternatives for the small professional contractor, equipment rental outlet or do-it-yourselfer.
Capable of all-fiber installation of loose fill or spray materials, the SERIES 100 features:
* Welded steel construction
* Heavy-duty rotary air lock
* Powder coated finish
* Recessed control panel and a 100' corded remote
* 8 cu. ft. hopper capacity
Designed for versatility and economical operation, the electric portable SERIES 100 provides exceptional production and coverage.
|
|
|
|
|
|
Multi Stage Fans
Quiet running and maintenance-free operation are the key benefits of ACI Multistage Blowers. They are direct driven units and are ideal for many higher pressure applications.
Direct mounting of the impellers together with low motor speeds result in minimal noise levels as well as high pressure performance. In addition, the Multi Stage’s modular system design offers a wide choice in the number of stages and power supply possibilities. Flow rates are up to 850M³/Hr (500CFM) and pressures range up to 150 mBAR (60 In.Swg)
The Multi Stage also has a unique simple airflow shut-off feature. With side-channel blowers an additional pressure-relief valve would be required in order to avoid motor burn out. This is not only an added expense to the system, but also creates further noise pollution.
- Available in single or three phase, DC, 400Hz, and ATEX versions.
- Comprehensive range of accessories is available, including hoses and filters.
- Volume or specialised bespoke available.
- Full design and testing facilities, including airflow and noise testing.
|
|
TB-350X3T
Breezy Bud, Inc. has devoted itself since its founding to manufacturing high quality industrial blowers and fans. Our customers appreciate our dedication to working with them to produce a blower that meets their requirements.
Our blowers are engineered to run continuously trouble-free. Our blowers have a number of features that contribute to our blower's efficiency and long operating life. Some of these features include high quality materials expertly assembled, ease-of-maintenance, low vibration, and low noise operation. Listed below are some of the types of blowers that we manufacture:
-Casting Multi-Stage Centrifugal Blower
-Casting Single-Stage Centrifugal Blower
-Clean Room Fan
-Conveyor Blower
-Corrosion Resistance Blower (Titanium, Hastelloy, etc)
-Cutter and Trim Blower
-Gas-Tight Booster (1~15kg/cm2G, depend on system required.)
-Gas-Tight Blower
-High Temperature Resistance Blower 900℃
-Spark Resistance Blower
-Wear Resistance Blower
|
|
Key Facts for the LAMSON/HOFFMAN Multi-stages Centrifugal Blower:
Specifications/Performance:
> Airflow to 41,000 cfm (70,000 m3/h)
> Pressure to 22 psig (1.52 bar)
> Vacuum to 17.6" Hg (447 mm Hg)
> Require minimal care - known for extremely low maintenance.
Gardner Denver is the world's largest manufacturer of multistage centrifugal blowers / exhausters with an extensive model selection and performance range to match the exact requirements for the most demanding applications.
|
|
|
MI-CO find many uses and among the other we mention: landfill biogas treatment, gas processing environments Atex, pneumatical cleaning, pneumatical transports, pneumatical sample and post, agitation of liquids, moving of liquids with air jets, screens of air, tunnels ventilation, air handening, cooling, driving, blowing in the cupola, heat exchangers, alimentation of gas under strong pressure, gas burners, booster of gas line, gas welding under pressure, naphtha burners, trial of combustion engine, removing of chip and slag, spraying system, intake under strong depression for feeding sucker and similar, blowing and intake in the typographic machines.
|
|
|
Housing compression-proof for PN 2,5/PN 6. Cylinder with noise reducing chamber on the discharge side, housing with connections for injection- and water flushing, as well as for lubrication - and purge oil supply systems. Conveying chamber by single-acting oil-purged mechanical seals in combination with labyrinth seals sealed on the shaft. Direction of flow horizontal/vertical (depending on size). Drive directly via coupling or flexible spur gear (depending on size).
|
|
Breezy Bud, Inc. has devoted itself since its founding to manufacturing high quality industrial blowers and fans. Our customers appreciate our dedication to working with them to produce a blower that meets their requirements.
Our blowers are engineered to run continuously trouble-free. Our blowers have a number of features that contribute to our blower's efficiency and long operating life. Some of these features include high quality materials expertly assembled, ease-of-maintenance, low vibration, and low noise operation. Listed below are some of the types of blowers that we manufacture:
-Casting Multi-Stage Centrifugal Blower
-Casting Single-Stage Centrifugal Blower
-Clean Room Fan
-Conveyor Blower
-Corrosion Resistance Blower (Titanium, Hastelloy, etc)
-Cutter and Trim Blower
-Gas-Tight Booster (1~15kg/cm2G, depend on system required.)
-Gas-Tight Blower
-High Temperature Resistance Blower 900℃
-Spark Resistance Blower
-Wear Resistance Blower
|
|
Radial blowers achieve high delivery volumes with very little pulsation. The frequency inverter integrated on the motor provides the capability of matching volumetric flow exactly to customer requirements. Accessories, such as intake filter or suction sound absorber, are available as optional extras.
|
|
General description
Application
These fans are designed especially for local ventilation. They are installed on wall brackets inside the rooms. Ability to over-come signi! cant " ow resistances makes them especially useful in installation with local exhausts.
Structure
It consists of a spiral steel housing, motor with a radial impeller mounted on its shaft. The fan inlet is equipped with a " ange, to install it on the wall bracket or ! ltering unit. It is recommended to install silencers type TK at the fan inlet and outlet.
|
|
The air-flow giant in the Leister blower program. At 50 Hz the air output is 13 500 l/min and 15 900 l/min at 60 Hz.
With the appropriate accessories, it supplies one or more
Leister air heaters.
• High air flow
• Robust
• Continuous operation
• Can be fitted in every position
|
|
DESCRIPTION: Single Stage, Hi ideal for coatinggh-Speed Centrifugal Compressor, Oil-Less, SpindlDesign.
DRIVE SYSTEM: DirectDrive™ Technology (Patent Pending), Impeller directly coupled to Motor Shaftwith Variable Speed Frequency Drive Control. Integrated Motor Protection, Maximum Air Inlet Temperature: 150ºF [60ºC]
CONSTRUCTION: A356-T6 Alluminum, 79lbs. [36kg]
HIGH-SPEED MOTOR: TEFC, IP54, External Junction Box, 10/7.5HP [7.5/5.5kW] 3-Phase, 190-600VAC, 50/60Hz, 105ºF [40ºC] Ambient.
VARIABLE FREQUENCY DRIVE: IP20 (IP66 Available), 10/7.5HP [7.5/5.5kW] 3-Phase, 190V-600V, 50/60Hz, CE EMI/RFI Electrical Filter, Digital & Analog I/O, Network Communication.
|
|
RTS Fans
New York Blower RTS Fans combine the rugged construction required in heavy industrial-process applications with pre-engineered fan designs for unequaled performance, quality and value. RTS radial-tip wheels handle a wide variety of airstreams usually reserved for field-erected equipment including baghouse exhaust, recirculation of dust-laden gases and induced-draft service.
|
|
Regenerative Blower Product Lines
AMETEK Rotron designs and manufactures an assortment of regenerative blowers for industrial, environmental, instrumentation, and chemical processing applications. These oil-free products feature compact construction, low acoustical noise, highly reliability, and long lives without scheduled maintenance requirements, providing you with high air pressures/vacuums and the best warranty in the business.
|
|
Gast's Regenair regenerative blower line for high volume vacuum or compressed air applications offers motor-mounted, separate drive, and models with explosion-proof motors used in Soil Vapor Extraction (SVE).
· Double-sealed, permanently lubricated bearings on many models minimize maintenance while maximizing performance
· The design ensures exhausted air is always clean and oil-free
· Integrated mufflers on single ended units minimize operating noise and eliminate the hazard of an exposed impeller
· Strong fan cooling helps dissipate heat around bearings and impeller housing, prolonging bearing life and allowing cooler air delivery.
· All blower models shown are equipped with UL & CSA certified motors except separate drive models
|
|
|
|
|
|
Dutair remote drive side channel blowers are high pressure blowers equipped with a bare shaft and used in combination with a v-belt or coupling drive. They are an excellent solution for mobile applications because these remote drive side channel blowers can be driven by electric motors, hydraulic motors, pneumatic motors and combustible engines. Moreover, the rotation speed of Dutair remote drive side channel blowers can be increased to 4500 rev/min to raise the performance. By choosing the matching rotation speed the flow and pressure can be optimized for your process.
Dutair remote drive side channel blowers can be used for applications without electricity as power supply. Examples like material transport, vacuum lifting or mist generation show how remote drive side channel blowers can be applied as mobile use. Also in cases where only direct current is available and DC-motors have to be used the remote drive side channel blower is the best answer.
Sjerp & Jongeneel presents a program with single and double impeller versions of the Dutair remote drive side channel blower. Feel free to contact us as we will be glad to advise you about your application.
|
|
|
M-D Pneumatics rotary lobe blowers from Tuthill Vacuum & Blower Systems are available in our Competitor, Equalizer and PD Plus blower product lines.
|
|
|
|
Blowers
