|
|
|
|
|
|
The various designs and ultimate pressures of R 5 type pumps allow the pump to be easily and optimally adapted for any process. R 5 type vacuum pumps are designed for continuous operation in industry and have been successfully used for many years in various applications.
Compact design, air cooling and easy access allows rapid and simple servicing with long periods between service. 0.1 mbar to 20 mbar covers every rough vacuum application. No preventative maintenance apart from routine oil and filter change is required.
Features
* Ultimate end pressure of 0.1mbar (previously 0.5 mbar)
* Increased suction capacity at low pressures
* Reduced model variants
* Same price as old model
* Proven reliability, also under continuous operation
* Air-cooled – no water needed
* Excellent water vapour tolerance
* Standard mounted oil mist eliminator
* Easy maintenance
Application
Ideal for use in various industries such as Packaging, Chemical & Pharmaceutical Industry, Plastic, Printing and Paper, Food, Beverage, Wood, Pneumatic Conveying, Brick Making, Drying and Impregnation, Adsorption and Degassing, Handling, Environmental Technology, Metallurgy, Remediation and many more.
|
|
The R 5 Compact range of pumps shares the same design features as the R 5 standard range, but they are optimised for use in applications and machines where space is limited.
They also inherit the wide operating range, easy adaption, continuous operation and excellent operating record of the R 5 range and their compact design makes them easy to service.
No preventative maintenance apart from routine oil changes is required.
Features
* Proven reliability, also under continuous operation
* Air-cooled – no water needed
* Excellent water vapour tolerance
* Standard mounted oil mist eliminator
* Easy maintenance
Application
Ideal for use in Packaging, Chemical & Pharmaceutical Industry, Plastics, Printing and Paper, Food, Beverage, Wood, Pneumatic Conveying, Brick Making, Drying and Impregnation, Adsorption and Degassing, Handling, Environmental Technology, Metallurgy and many more.
|
|
- combination of a diaphragm pump with a rotary vane pump
- for the fine-vacuum range in special applications, e.g. for aggressive gases and vapours, for evacuation of solvent recovery vapours, for pumping of vapours which are soluble in oil
- example of use: freeze drying
|
|
The cutter pumps of the series SFC are capable of cutting aluminum chips and similar materials and pumping of these materials along with the coolant fluid. An agitator located at the pump suction helps to break up and separate any large bundles of chips or birds nests which reach the pump suction.
Axial / semi-open impellers
Large chips
25 ... 1800 l/min
4 ... 35 m
|
|
MultiStream Pumps with adjustible single-channel impeller
MultiStream-pumps are suitable for handling effluent or sewage in municipal and industrial pumping stations as well as in surface water drainage applications. The smaller types are also used very successfully as portable units to deal with emergency situations. The sewage pumps UAK are suitable for handling water without faeces. In hazardous locations or in case the pumps are connected to the public sewerage we recommend our explosionproof sewage pumps UFK
Recommended for:
- effluent which contains fibrous matter
- mixed water
- effluent which contains solids
- rainwater
- raw effluent
- raw sludge
|
|
KT6CC DOUBLE VANE PUMP
Intensive pressure:350 bar
Continuous pressure:275 bar
Maximum RPM:3000 RPM
Displacement:21.3/26.4/34.1/37.1/46/58.3/63.8/70.3/79.3/88.8/100
*Installation dimensions compatable with Dension pump
|
|
DOUBLE VANE PUMPS
FOR PRESSURES UPTO 320 BAR (4650 psi) AND
SPEEDS UPTO 3600 RPM
DISPLACEMENTS- 12.5 TO 540 CC (0.75 TO 32.80 cu.in)
|
|
For industrial & mobile applications
- From 18+18 c.c./rev to 195+118 c.c./rev
- Very high pressure up to 275 bar
- With flow regulating and pressure limiting valves
|
|
Pfeiffer Vacuum is committed to innovation. It was in this spirit that we developed the new PentaLine™ rotary vane pumps for your applications
in the low- and medium-vacuum range of down to 10-3 mbar.
The optimized drive system that is used in these pumps affords you
cost-effectiveness that is convincing and environmentally friendly. The approximate 50 %
Space-saving and hermetically sealed – the innovative PentaLine™ is super clean and requires only little maintenance. Both man and machine benefit equally from these New Generation rotary vane pumps. As a
further innovation, they incorporate a motor concept that makes them easy to deploy anywhere in the world. The PentaLine™ pumps run extremely quiet and with a minimum of vibration.
|
|
The G2000 is a fixed flow, heavy duty, transfer pump. It is available in a variety of materials to suit various fluid types.
Capacity up to 500 M3/hr 2200 USGPM
Pressure up to 40 Bar 580 Psi
Viscosity up to 1,000,000 cSt 4,630,000 ssu
Temperature -40 to +300 C 570° F
|
|
Features and Specifications:
-Built in pressure bypass valve to protect the motor under adverse conditions
-15 GPM flow rates against pressures set by bypass valve
-Integrated reverse flow prevention check valve so that the engine oil pressure can not motor the pump backwards
-Whisper-Vane positive displacement vane technology
-Low maintenance direct shaft coupling
-Easy reorientation of intake and exhaust ports
-Suction hose size: 1.25" max
-Discharge hose size: 1.00" max
-Designed for large diesel engine applications
|
|
Features and Specifications:
-Built in pressure bypass valve to protect the motor under adverse conditions
-15 GPM flow rates against pressures set by bypass valve
-Integrated reverse flow prevention check valve so that the engine oil pressure can not motor the pump backwards
-Whisper-Vane positive displacement vane technology
-Low maintenance direct shaft coupling
-Easy reorientation of intake and exhaust ports
-Suction hose size: 1.25" max
-Discharge hose size: 1.00" max
-Designed for large diesel engine applications
|
|
|
|
|
|
Features:
• Complete assembly of motor and pump that won’t leak
• Requires no scheduled maintenance
• Prewired 208/230 3-phase motor (460VAC available from factory)
• Flow up to 2000 liters/hr (9 gpm)
• Pressure up to 4 bar (60psi) rise
• Continuous duty
• Preloaded rolling contact bearings
• Internally cooled and cannot overheat, when there is some external flow
• Reversible – Switch any two lead wires
• Can deliver oil of almost any viscosity
Applications:
• Draining and filling engine sumps and reservoirs
• Prelubing diesel engines for long life between costly overhauls
• Transferring oil – back and forth and at different elevations
• Finishing and polishing of stored diesel fuel and other oil
• Ink jet carpet printing
• Filling and bottling plants and production lines
• Silent oil cooling of X-ray equipment in hospitals
• Pumping hydraulic oil through heat exchangers for cooling
• Pumping through filters for cleaning
Description
The Daisy oil pump is a completely sealed, positive displacement motor/pump unit for pumping non-corrosive fluids. It is reversible and has no shaft seal. It will deliver up to 2000 liters/hr (9 gpm) 24/7. Pressure rise through the pump is internally limited to approx. 4 Bar (60 psi) over a wide range of viscosities.
The Daisy is a floating-vane type pump produced in two configurations. Both are reversible but P/N 6460 has a built-in rotary reversing switch which is useful for bi-directional applications.
The Daisy uses a unique tripod mount based on the standard NEMA bracket hole locations. The Daisy can be mounted in any orientation, horizontal or vertical, except inverted.
|
|
The EP4 pump is an ideal prelube oil pump for large engines, but it is also a great oil or fuel transfer pump for limited duty cycle applications. It performs well with high viscosity oils. As a positive displacement pump it will self prime but is more efficient and quieter than a gear pump. Anywhere you need to move oil or fuel around you can do it easily and safely with a reliable EP4 pump.
The EP4-24 is powered by a self-contained motor running on 24 Volt DC power. The EP4-12 is the same unit running on 12 Volt DC power. Both voltages are capable of pressures in excess of 60 psi, with a pressure gauge built right into the face to show it. These pumps also incorporate a self-contained low loss check valve to prevent backflow. They are quiet due to their "whisper vane" pump technology, and if they do make noise it's due to a starved suction pipe that is too small. They are so quiet that you can hear the normal rattling sound of cavitation in an inlet starved pump
|
|
Features and Specifications:
-Built in pressure bypass valve to protect the motor under adverse conditions
-15 GPM flow rates against pressures set by bypass valve
-Integrated reverse flow prevention check valve so that the engine oil pressure can not motor the pump backwards
-Whisper-Vane positive displacement vane technology
-Low maintenance direct shaft coupling
-Easy reorientation of intake and exhaust ports
-Suction hose size: 1.25" max
-Discharge hose size: 1.00" max
-Designed for large diesel engine applications
|
|
Hypro's turbine pump is a high-capacity, low-pressure spray pump that is designed specifically for tractors with a 1000 rpm PTO. The 9600C is built using a heavy-duty cast iron body and glass-filled Valox impeller for wear resistance. The shaft is stainless steel and the lip seals are Viton® for corrosion protection.
The 9600C is a direct drive pump for high-volume spraying or liquid transfer applications. The pump features include large 1-1/2" ports, a 15/16" shaft with 1/4" keyway. Heavy-duty sealed bearings are used for longer life in agricultural spraying applications.
|
|
Flow rate: Nominal 365 Litres/min (81 gallons/min) at 1500rpm
Self-priming from dry up to 2.4m (7.8ft)
Pressure up to 3 bar
Features::
• Handles soft solids - max. 18mm diameter
• Certified to US 3A Standard 02-09
• Clean-In-Place (CIP) or easy strip clean
• Handles viscosities up to 50,000 centiPoise
• Minimal shear to thixotropic fluids
• Easy to service and maintain
|
|
Features :
- Self priming to 7 1/2 vertical feet (2.3m)
- Maximum head of 23 feet (10 PSI) (.7 bar)
- Liquid temps from 40ºF (5ºC) to 185ºF (85ºC)
- Thermal overload protection
- Stainless steel shaft
- BUNA-N impeller and lip seal
- Built-in reverse switch and 8 foot cable with battery clips (3000-350 only)
A variety of uses for these pumps has been made possible by the use of a Buna impeller for applications in pumping water to changing oil in cars, trucks, farm equipment and machinery. Pumps incorporate thermal overload protection. The premium model includes a built-in 3 position switch to simplify flow reversal. Dual ports, 3/4" male garden hose and 3/8" NPT (F).
|
|
Hale Floating Pumps
Hale's Fyr Flote and Super Chief pumps are designed especially for the fire services to be highly portable and easy to use. Able to draft in as little as four inches of water, they can be easily used with alternative water sources such as streams, lakes, or pools. They are designed for easy maintenance with a tough long lasting outer shell.
|
|
Goulds Model 3640 API 610 (BB2) between bearings radially split double suction two-stage process pumps are designed for smooth, reliable operation, and meet the toughest specification requirements of API-610 to assure extended service life.
Specifications:
Capacities to 1500 GPM (340 m3/h)
Heads to 1400 feet (425 m)
Temperatures to 850° F (455° C)
Pressures to 750 PSIG (5170 kPa)
Design Features:
Opposed Impeller Design - Balances axial loading
Large Shaft Diameter - For low shaft deflection and stable rotordynamic performance
Radially Split Design - Dependable casing sealing for high temperature process pump applications
Rugged Mounting Flanges - Designed to meet API-610 nozzle load requirements
Between Bearings Design - Improved rotor stability at high speeds and heads
Centerline Mounted - For high temperature services
|
|
KT6C SELECTED highest pressure and utmost RPM vane pump
Intensive pressure:350bar
Continuous pressure:275 bar
Maximum RPM:3000RPM
Displacement:21.3/26.4/34.1/37.1/46/58.3/63.8/70.3/79.3/88.8/100
Application:
Ocean going and Marine equipment, construction equipmnet
Scrap balers equipment, Construciton equipment, oil explortion
machine, Oil exploration equipment, presses and shearing machines
* Installation dimensions compatable with Dension pump
|
|
Feature:
Max. Pressure:245 kgf/cm2
Max. Speed :1800 RPM Min. Speed: 600 RPM
Application: Hydraulic press machine, fishing boat,
lift truck, plastic injection machine.
For detail product dimensions, performance characterisitics and order code, please visit our web site:www.kcl.com.tw
|
|
Corken SC-Series pumps are a rotary side channel design. They produce a maximum differential head of 1,150 ft (350 m). The side channel pump is offered in six different sizes, each ranging from one to eight stages. This provides for a wide range of pressures and capacities ranging from 1gpm to 185 gpm (3.8–700 L/min). These pumps can handle discharge pressures up to 580 psig (40 bar).
Product Features
* Radial vane impellers and two outlet openings per stage allow for high vapor content
* Enclosed centrifugal impeller at pump suction provides improved NPSH capabilities
* Exceptional in light liquid and liquefied gas transfer
* Floating Impeller - No metal to metal contact.
* Modular design
* Smooth continuous flow
|
|
|
|
|
|
Heavy duty process multistage pumps, axially split, diffuser type with single or double entry 1st stage impeller.
Pump components geometry optimised through hydraulic, structural, thermal and dynamic F.E.M. analysis lead to an high product reliability. The "modular design" philosophy permits to cover a wide range of applications replacing the main hydraulic components i.e. only impeller/diffuser. Casing, shaft, mechanical seals, bearing frames result therefore fully interchangeable and reusable. Opposed impeller and diffuser configuration to minimise axial and radial hydraulic thrusts.
Large eye single suction or double suction 1st stage impeller to meet low NPSH requirements.
Hydraulic performances checked on a Single Stage Test Equipment. This is particularly useful to verify the effective 1st stage NPSH.
Easy internal inspectability and maintenance.
Central and lateral balancing drums adequately shaped to optimise pump rotordynamic behaviour.
Near centerline casing mounting for high temperature stability.
Deep stuffing boxes, designed in accordance to API 682 Std., suitable to accept any type of mechanical or packing seals.
Axial split bearing housing for easy inspection and maintenance procedure.
Labyrinths and deflectors at either bearing housing to maximise protection against dirt.
A wide range of sizes and material combinations complete the variety of the offered product.
Main design features
Fully designed according to latest edition of API 610 Std.
Number of stages rangeable from 4 to 13.
Rotor operates away it's critical speeds.
Side-Side suction and discharge nozzles integrally cast on lower casing half.
Contoured grafoil or glassfiber gasket to assure joint between casing halves and eliminate interstage leakages.
A wide range of sizes, number of stages and material combinations complete the variety of the offered product.
Casing guidekeys for high temperature application; over 120°C (250°F).
'CARB' or hydrodynamic line bearing for high temperature application.Three bearings arrangements available:
Ball Radial / Ball Thrust
Sleeve Radial / Ball Thrust
|
|
|
High Temperature Pumps offered in closed impeller construction with centreline mounting. Offered with special stuffing colling to handle to various hydrocarbon liquids upto 320 Degree Temperature.
|
|
Vane Pump - SAE - Denison
• 320 bar max pressure for T7B, 300 bar for T7AS* & T7D, 275 bar for T6C & 240 bar for T7E
• Silent technology even under high pressure
• Wide range of displacements• User friendly = easy conversions & evolutions
• Wide number of shafts available (SAE & ISO)
• Rear drive train options available (SAE A, SAE B or SAE C)
|
|
Our vairable displacemnet vane pump series have designed seven different out put flow for various
application. Such as 8, 12, 15, 20, 23, 26, 30 and
60 litre per minute at 1800 RPM
Pressure adjusting range:1. 5-18 kgf/cm2
2. 15-35 kgf/cm2
3. 30-55 kgf/cm2
4. 50-70 kgf/cm2
Application: CNC Machine Tool, special purpsoe machines
and all cuting machines.
For double pumps and all dimensions, please visit our
web site: www.kcl.com.tw
|
|
|
PVL are variable displacement vane pumps equipped with mechanical compensator for outlet pressure and max displacement adgustment. these low noise pumps are available in 3 different size, have flange ports according to ISO 3019/2 and are designed to operate with anti - wear oil
|
|
|
|
|
|
Excellence Pump Industry Co., Ltd. also offers pump replacement parts. Moreover, we can manufacture from blueprint, or samples provided by our customers.
Excellence has engineers specializing in hydrodynamic design, mechanical production, casting and welding treatment, heat treatment and automatic control. Excellence Pump Industry also has the various types of lathes, milling machines, planers, grinding machines, punch machines, hydraulic presses, pipe benders, wielding machines, numerical-controlled punch press, numerical-controlled benders etc. Moreover, The company has developed and successfully manufactured different types of stainless steel, abrasion-resistant cast iron, corrosion-resistant cast iron and heat-resistant cast iron. The products of Excellence Pump Industry Co., Ltd. are widely appreciated by our customers worldwide. Excellence Pump Industry has invested heavily in precision casting to improve the overall quality of the products. The advanced investment molding technique can customize our precision cast parts according to our clients' needs. With a group of creative engineers and managers, the casting division of the company could manufacture products that meet, and often exceed, the quality as specified by our customers.
If you want to get more details,please click Excellence website:
www.excellencepump.com
|
|
More than equal to any competitive design because of its construction features and highest hydraulic efficiency. If you can't have a WEMCO Model C, this is the best alternative.
Features / Benefits
- Rimmed impeller.
- Highest hydraulic efficiency of any vortex design.
- Wear on rim lengthens vane - hydraulic performance actually improves with wear.
- When rim finally wears off, impeller is essentially a full diameter radial impeller, with like-new hydraulic performance.
- Relatively steep H/Q curve compared to straight radial vanes.
- Low life cycle cost.
- Life of the most expensive component - the casing - is maximized by sacrificing the least expensive - the impeller.
|
|
|
|
Rotary vane pumps, Impeller pumps
