Plasma surface treatment machines

Plasma systems from Diener electronic have long since established themselves in a wide variety of industrial sectors. With the PlasmaBeam PC atmospheric pressure plasma system, you can rely on modern and future-proof plasma jet technology ...

The 2.6 litre LOW-COST PLASMA LAB SYSTEM ZEPTO with manual, PC, and PCCE control is primarily intended for the following applications: Small batch production, Analytics (SEM, TEM), Medical engineering, Sterilising, Research and development ...

The 10.5 litre LOW-COST PLASMA LAB SYSTEM ATTO with manual, PC, and PCCE control is primarily intended for the following applications: small-series manufacture, analytics (SEM, TEM), medical engineering, sterilising, research and development ...

Orifice diameter: 0.15 mm - 0.6 mm
Flow: 0.14 l/min - 1.95 l/min
Pressure: 100 bar

Tip sizes to be defined depending on applications SF Airless Flat Tip SS Body The reference nozzle in the wood and Leather industries Robotic applications

Orifice diameter: 1.5 mm - 4.5 mm

The C Series of tungsten carbide inserts, with its larger head, is specifically designed for Airless applications with higher flow rates. The internal diameter ranges from 1.50 mm to 4.50 mm. The 'big' head C insert is available in ...

Orifice diameter: 0.01 in - 0.02 in

Exitflex offers a new kind of tungsten carbide inserts, cut in a way to produce asymmetrical fan patterns. The asymmetrical shape of the spray guarantees an even coating, for instance on drums or gas bottles when spraying with an angle ...

ULS OMEGA has all available interfaces and flexibility required to integrate plasma technologies into complex scientific or industrial environments. This perfect solution fits specific needs for plasma parameters follow-up and monitoring ...

ULS NANO has all of AcXys Technologies’ plasma power and high performance into a cost effective, compact and versatile machine. ULS technology – Integration made easy thanks to a compact design and nozzle – Local, yet powerful ...

ULD has 7 versions available with a plasma curtain from 6 to 50 cm large. ULD technology – Homogeneous plasma curtain from 60 to 500mm – Suitable for flat parts or complex plane-like shapes – Very low temperature treatment – ...

The XQ69 pre-treatment line is an equipment that performs surface shot blasting and rust removal on steel plates, and applies a layer of protective primer. Pre-treatment of steel can improve its corrosion resistance and fatigue resistance, ...

Belmeko is producer of pretreatment tunnels, single and multi-chamber spraying systems and bath series; all produced in its own workshop in Oostkamp, Belgium. The tunnels can be made of stainless steel or polypropylene. The pretreatment ...

Spray Pre-Treatment Systems Spray surface pretreatment lines are ideal for automated powder coating systems where the product quantity is high and where dipping type pretreatment does not meet the demand. The work pieces moving ...

Orifice diameter: 2, 1, 0.8 mm

Air booster nozzles, TAIFUJet® series (42 mm-wide, Flat type) TF-F42 Material • PPS or Stainless steel 316L equivalent Weight • PPS: 30g, S316L: 144g Max. Air Pressure • PPS: 0.7MPa (100psi), S316L: 1.0MPa (140psi) Features • ...

Orifice diameter: 0.2 mm - 10.3 mm

Standard Flat Spray Nozzles - One-piece Structure Mountain Shaped Distribution [Features] • Flat spray pattern with a mountain-shaped spray distribution having gradually tapered edges. • Tapered edges overlap to provide uniformity ...

Flow: 2.2 l/min - 13 l/min
Pressure: 3 bar
Media temperature: 80 °C

Air booster TAIFUJet® TF-PF series (Long flat type with replaceable PPS nozzle tips) Features • Long flat air booster nozzle suitable for installation in confined spaces. • Blowing manifold with replaceable nozzle tips for easy maintenance ...

Pre-treatment equipment is always designed after the specific demands for every project. All technical and environmental aspects are considered. Solutions for most chemical processes on the market can be supplied.

In Dip Tank Lines parts are loaded inside baskets and treated by dipping them inside each process tank for prefixed period of time. Ironphosphate and Zincophosphate surface treatment processes can be done in dipping lines. Materials ...

Chamber Pre-treatment Lines Chamber Pre-Treatment Lines are compact systems in which several processes can be made in one unit, therefore occupying much less space. It has made for an alternative to classical spray cleaning lines ...

Orifice diameter: 4, 8, 15 mm

The internationally patented Variacor® system enables you to assemble spraying systems quickly and easily as well as adjusting nozzle positions efficiently. Economy: You don't waste time calling a piping specialist or boiler-maker. Ease ...

Acetone Dipping Machine The Acetone Dipping Machine is a semi-automatic equipment to treat acetate products in acetone vapors. Respectful of anti-pollution and safety norms and respectful of operator’s health. All steps of the working ...

Automatic Flux Treatment Machine The model referred to as “AUTOFLUX” is an automatic device, ideal for the treatment of spectacle frames in metal by immersion in bath of “FLUX” and subsequent hot air drying. Respectful of anti-pollution ...

The standard system V6-G is designed as a tabletop unit for industrial small series production as well as for the low-pressure plasma treatment in R&D laboratories. It can be used for the surface treatment processes cleaning and activation. The ...

The batch system V10-G is designed for the removal of photoresists. Furthermore, it can be optimally used for the cleaning of wafers. Areas of application Ideal system for removing photoresist layers (also SU-8) after drying processes ...

Standard systems for activation, cleaning, coating, etching The system is integrated in a 19“ rack, which is equipped with rollers and height- adjustable feet. A professional PLC control unit serves as a storage for definable process ...

Orifice diameter: 0.25 in - 0.38 in
Flow: 2.3 m³/h - 5.7 m³/h
Pressure: 1, 0.2 bar

The DD 106 discharge nozzles in the neXt® product family are designed to fit existing ball heads of 1/4" Ariana articulated hoses. This means that you may, for instance, extend your existing articulated hose system by adding deionising ...

Orifice diameter: 0.25 in
Flow: 2.3 m³/h - 5.7 m³/h
Pressure: 0.5 bar - 2.5 bar

The DD 206 and DD 206 (A) discharging nozzles are flow-optimised. A greater electrostatic discharge reach and cleaning effect on the material to be discharged may be achieved with the additional support of compressed air. Air connection ...

Flow: 3.7 m³/h - 9.45 m³/h
Pressure: 0.2 bar - 2.5 bar
Media temperature: 5 °C - 80 °C

Discharging Nozzles, Antistatic, The DD 306 and DD 306 A discharging nozzles in the neXt® product family are flow-optimised. Due to their short design, they are, among others, used in areas requiring air-supported discharge and also ...

Application : Equipment for surface preparation using chemical processes - all industries. Decription : Spraying tunnel – pre surface treatment Dimensioning to the customer's exact requirements Scrolling or cell part treatment Possible ...

Nozzle ball adjustable DPL model The nozzle ball adjustable is easily mountable on the clamps ZPL series and through NPL locking ring. Available with a wide range of flow rates ranging from 3.9 to 22.3 lpm at 3 bars, the standard ...

All flat tips series “Airless” integrate high quality tungsten carbide inserts, which provide maximum resistance to abrasion and uniform distribution. We suggest to check usually the tips and replace them in time in order not to lose ...