|
|
List of Dial Indicator: List of functions implemented in various models of dial indicators.
Compact type Dial Indicator: Compact type with a maximum scale frame diameter of 41 mm.
Dial Indicator 2046S: 10 mm-stroke, regular dial indicator with a minimum reading of 1/100 mm.
Large Dial Type Digimatic Indicaor: Large dial type with a measuring range of 20 mm or more. |
|
- Satin-chromed body
- With Tungsten carbide measuring tip
- With double dial indicator for measuring mm stroke
- Shockproof
- Micron versions are jewelled
- Adjustable scale with stop screw
- Some models offer tolerance indicators, see picture
- Can be supplied with or without "lug" on back plate
- 400-03 features remote operation control by cable plunger
- Packed in foam box |
|
| Noga offers four sets combining the most popular holders with the world's best made indicators. |
|
Provide the advantages of mechanics combined with electronics – All in one.
• Inductive measuring system,
patented.
• Analogue and numerical
indication.
• Numerical interval to
0,01/0,001 mm.
• Selectable scale division :
10, 20, 50 µm/1, 2, 5 µm.
• Water and coolant resistant
(IP65).
• Metric/inch conversion.
• RS 232 data output combined
with external power supply.
• Displayed measuring modes
(NOR/MIN/MAX/MAX-MIN).
• Automatic shut-down.
• Compatible with all TESATAST
accessories. |
|
This range of advanced electronic calipers is capable of operating in areas previously unsuitable for this type of gauge i.e. in the presence of water and coolant.
Features:
- Constructed in hardened and ground stainless steel
- Max. error 20µm up to 100mm / 30µm above (DIN862)
- Data output opto RS232
- Lithium 3v CR2032 battery
- 3000h battery life
- Display LCD 6mm
- Slider speed max. 2m/sec
- Protection to IP65
- Section of the beam 16 x 3mm
- Depth rod (150 and 200mm) 4x 13mm |
|
Patented measuring system – TESA magna µ system
New electronic caliper – The highest degree of protection ever achieved
with hand-held tools of this type – Totally immune to the penetration
of liquids and particles of metal.
Magnetic measuring system – a TESA’s technology guaranteeing full
reliability and accuracy, even in the toughest conditions of use –
SWISS MADE. |
|
The BARCOR Electronic CHAMFER GAGE is a precision instrument designed specifically to measure the top diameter of chamfers, countersinks, center drills, or tapered holes. Simply press the Electronic CHAMFER GAGEs spring loaded Gaging Plunger into the piece being measured and directly read the size in .0002" or .005mm with the SAME gage. Or, at the press of a button, change to Comparative Mode from a known standard.
Like BARCOR's well-known mechanical counterpart, the Electronic CHAMFER GAGE requires no Setting Master (Standard) or lookup chart. To Zero or Set the gage, just press the base against any flat ground surface and press the "on" button. Equipped with rechargeable long-life batteries, the gage may also be powered continuously through its 110 VAC adapter/battery charger or directly from a printer, PC, data collector, etc. |
|
We offer three main versions of our Digital Probe
• Spring Push
• Pneumatic Push
• Feather Touch
The Probe is an absolute measuring device that delivers accurate results when switched on, regardless of any 'OFF' movements. |
|
• Measuring Range 0.5 mm
• Resolution Programmable to <0.01 µm
• Tip Forces down to 5 g
• Excellent Repeatability
• Up to 3906 Readings/Second
• Industry Standard Styli
• Compact Size
• Direct Reading in mm/inch
Solartron's new Digital Lever Probe has been conceived for the precision measurement market. This probe is ideally suited to applications where the use of axial measuring probes is not possible, and where a low tip force and a high number of probing points are required. Its simple design and exceptional reliability result in a reduced cost of ownership without any reduction in performance. |
|
- Digital outside micrometer with 'easy read'
large 7.5mm character height, digital display
- Features interchangeable v-anvil inserts for different Metric pitches
- Full set of Metric anvil inserts included
- Tapered for easier access to difficult areas
- Modern design
- Soft keys' for maximum operating comfort
- Long life guaranteed
- Features non-rotating spindle and constant force ratchet thimble
- Hammertone finished frame with high
quality insulated grip
- ABS/INC, preset, on/off, zero-setting, dataoutput, battery low indication
- Packed in plastic box with standard and
adjusting key |
|
• 0.5 mm Total Measurement Range
• Resolution Programmable to < 0.01 µm
• Simple Installation and Sensor Change
• Excellent Repeatability and Robustness in two planes
• Suitable for Operation in Bores with key slot
• Very Compact Size
• Changeable Tips
• Up to 3,906 Readings/Second
• IP65 Protection
• Traceable Calibration
• CE Marked
The Solartron Digital Mini Probe is a compact, low profile, transducer intended for measurements in confined spaces such as bores. The product is based on a parallel spring structure that is significantly more robust than a single leaf arrangement. This greatly improves the reliability of the sensor, extending its working life and allowing it to be used in more demanding applications, such as automatic gages. The parallel spring also ensures a high level of repeatability, both on axis and across axis, so that it can be used in dynamic applications where profiling is required. |
|
Slim Type ABS Digimatic Indicator ID-N/ID-B:
- Slim 35 mm wide body greatly enhances application range.
- Various features including waterproofness, display inversion, and back plunger.
ABS Digimatic Indicator IDS: Simplified economy type with a single function.
ABS Digimatic Indicator IDU: Single-function, economy type with a measuring range of 25.4 mm.
ABS Digimatic Indicator IDC:
- Widely used as a general-purpose, multifunction indicator
- Model provided with various measuring ranges, measuring forces, etc. |
|
Electronic dial gauge with additional functions such as min / max, TIR and tolerance indicator lights.
- Switchable sensitivity
- 0.01mm, 0.001mm / 0.0005", 0.00005"
- Direct Inch / Metric conversion
- Preset
- Zero setting
- Memory hold
- Ref I / Ref II
- Min / Max memory
- Display Min / Max
- Setting and display of tolerance limits
- Preset value recall
- Selection of measuring direction
- Half duplex transmission |
|
• Digital display LCD, height of digits 6 mm
• Water and coolant resistant, protection IP65 according to IEC 529
• Data output RS 232 combined with external power supply
• Polyamide case, fixed display
• Stainless steel measuring pin
• Interchangeable contact point M2.5
• Clamping: Stem Ř 8-h6 in hardened and ground stainless steel and dovetail back
• Self-contained use: 5000 hours continuously
• Automatic power shut down |
|
Brass Thickness Gage
Plastic Thickness Gage Assortments
Stainless Steel Thickness Gage
Steel Feeler Gage - Decimal Thicknesses
Steel Feeler Gage - Metric Thicknesses
|
|
The SYNCROTRAK® flow prover was designed by Calibron Systems personnel, who were also responsible for the research, development and design of the first small volume prover, as well as the concept of double chronometry. This is currently used by all manufactures of small volume provers.
SYNCROTRAK® flow prover features include a simple mechanical operation, no hydraulics or pneumatics and equal upstream and downstream volumes. There is also no adjustment for changing line pressures which eliminates operator error thus assuring superior and consistent proving results.
The SYNCROTRAK® flow prover meets the most stringent accuracy requirements of custody transfer meter proving or laboratory flow meter calibrations. Because of its small size, the rugged and reliable SYNCROTRAK flow prover is ideal for both portable and stationary applications. The highest accuracy, low pressure drop and smooth operation make the SYNCROTRAK flow prover the number one choice for proving coriolis mass flow meters, turbine meters and all types of flow meters. |
|
Rectangular Guage Block:
- Practical master gage for dimensional measurement
- Two types of steel and ceramic gauge blocks are available.
- Four classes of Class K, Class 0, Class1 and Class 2
Long Size Gauge Block Accessory Sets BMX-S1:
- Accessories for gauge blocks with a nominal size of 125 mm or more
- Used to create the masters of height and size.
- A scriber is also available.
Square Gauge Block:
- 24.1 x 24.1 square gauge block
- Three classes of Class 0, Class 1, and Class 2
- Absolute wringing using the hole |
|
Features:
» Special-steel gauge blocks
» Tungsten-carbide gauge blocks
» Ceramic gauge blocks
» Angle gauge blocks
» Gauge-block accessories
» Measuring balls |
|
CMM Plug Gauges Tooling Ball
The range of specially manufactured products by Spheric-Trafalgar is designed and engineered to suit the needs of engineers in industry. These include Spherical Plug Gauges, CMM Reference Balls, Plain Reference Balls and Tooling Balls (sometimes known as Icky Balls). Typical uses for these special products include the gauging of internal bores, setting of CMM machines, setting of precision measuring equipment and general purpose use in jigs and fixtures. |
|
| Rocking type inspection instruments for gears and splines are a cost-efficient solution for single productions and small batches. With a bit of skill, the actual dimension over and between balls, i.e. the highest measurement point, can be found by rocking the instrument. We recommend a Frenco UPM-certificate for all VA inspection instruments in order to verify a sufficiently small measuring uncertainty regarding the tolerance to be measured. |
|
Granite as material for optical plates brings important advantages for many applications. The absence of internal stress and the low thermal expansion coefficient assure long-term stability. The acid resistance, the hardness and the high achievable surface quality set granite apart from other construction materials.
With a density comparable to aluminum and a high stiffness the first structural resonances are so high that possible vibrations normally show negligible small amplitudes. The surface finish is grinded according to ISO 8512-2, grade III, and low reflecting which makes granite plates an ideal choice for laser applications. A 100mm grid of M6 threaded inserts is the standard mounting option. |
|
Digimatic Height Gage:
- High-efficiency height measurement with the optional dedicated probe
- Measuring range: up to 1000 mm with 3 models
- Universal type that places emphasis on the ease of operation.
- Measuring range: up to 1000 mm with 3 models
ABS Digimatic Height Gage HDS:
- Provided with the ABS function of well-established rotation drive handle.
- Measuring range: up to 600 mm with 2 models
Square column with the ABS function
- Measuring range: up to 1000 mm with 2 models
Standard Height Gage:
- Universal type of square column height gages
- Measuring range: up to 1500 mm with 5 models |
|
- Zero reference point can be adjusted for calibration
- Beam and slide made of hardened stainless steel
- Measuring faces are micro-lapped for high accuracy
- Chrome plated scale
- Super solid heavy base for greater stability and rigidity
- Carbide tipped scriber
- With magnifier reading glass from range 300mm and higher |
|
Z_CAL
• Very easy to use - very light - very handy
• Self-contained operation
• Small base to be used close to the machine
• Measurements of internal and external diameters, centerlines, gaps, without any manipulation from the keyboard
• Measurements of heights, depths, thicknesses, distance bore-shaft
Z_CAL 150 N° 930.0150
• Measuring range: 0 - 150 mm
• Application range: 0 - 150 mm
• Max error 2.5 + L [mm] / 125 (with standard probe, at T° = 20 ±0.5°C)
• Repeatability 0.002 mm
• Operational speed 0.1 m/sec
• Measuring force 0.3 N (0.25 - 0.5 N)
• Operational time 40h
• Height 350 mm
• Weight 3.7 kg
• Data output RS232 |
|
Noga high quality comparator stand holds indicators and probes for thickness and comparator work.
The Concentromat is a universal gage for checking the concentricity of the round parts having diameter of 1mm to 25mm. Used for checking External dia., Internal dia and Curved surface.
|
|
|
|