|
|
| Products 91 to 120 of 212 |
Precision measurement requires the use of micrometers. In 1848, the first measuring tool of this type was patented by the French inventor Jean Laurent Palmer as «calibre à vis et à vernier circulaire» (screw calliper with a circular vernier). Today, we continue to
make external micrometers with these typical features. |
|
Features:
» Digital micrometers
» External micrometers
» Special micrometers
» Micrometer heads
» Inside micrometers
» Three-point inside micrometers
» Depth micrometers |
|
Micrometer Head MHC:
- Space-saving type that suppresses the entire length.
- Models with a measuring range of 6.5 mm and 13 mm
Micrometer Head MHS:
- Universal type with a measuring range of 13 mm
- Widely-used compact model
Micrometer Head MHA:
- Universal type with a measuring range of 13 mm
- Easy to adjust the zero point of the thimble. |
|
MICROMETER SCREW
• SYLVAC inductive measuring system, patented
• Digital display LCD, height of digits 6 mm
• Data output RS232, combined with external power supply
• Simplex transmission
• Rotating display Ø 44 mm over 270°
• Non-rotating spindle
• Tungsten carbide anvil
• Fine adjustment as accessory |
|
Automated version fitted with TESASTAR-m – Provides enhanced measuring
capabilities through the use of dedicated accessories such as the modular
probe changer. |
|
Features:
- High-speed, real-time, non-contact measurement solution for probing, scanning, and advanced 6DOF motion tracking
- Kinematic mount for quick, repeated tool attachments with automatic identification
- Advanced MSP targets provide micron-level accuracy
Key Benefits:
- Track, measure, and scan with one powerful tool
- Unlimited range of motion without any off-angle limitations
- Multi-functional use saves money on equipment
- Enables advanced optical tracking applications, such as robot tracking and automatic tool guidance |
|
Features:
- Large Bright High Resolution Color Touch Screen
- Built-In Encoder Interface
- USB, LAN, VGA outputs
- Huge Data Storage Capability
- Longitudinal, Shear, Guided, and Surface Waves
- A-Scan, B-Scan, CB-Scan, and TOFD
- Corrosion Profiling and Flaw Imaging
- Up To 20m Length of One LIne Scanning Record
- Playback A-Scans for Recorded Images
- Enhanced Signal Evaluation - Live and Frozen A-Scans
- Defect Sizing and Pattern Analysis
- Compliance with ASME and RBIM Procedures |
|
Description:
Nowadays, the properties of surface topographies are increasingly influenced by new processing methods and new materials.
The traditional profile stylus method is often not adequate to characterize the functional behavior of surfaces. Three-dimensional recording and evaluation are required. Soft and thin-walled materials also require non-contact measurement.
Moreover, ever higher levels of surface quality are being achieved, greatly increasing the requirements placed on measuring systems in terms of resolution and measuring accuracy.
The MarSurf WS 1 satisfies all these requirements:
- Vertical resolution 0.1 nm (.004 µin)
- Three-dimensional measurement and evaluation in only a few seconds
- Compact measuring station configuration for the workshop and laboratory
- MarSurf XT 20 software
- Topographical evaluation software on the fully standardized and powerful MarWin software platform |
|
The MicroGlider® is the highly precise, multi-sensor platform
measuring system from FRT intended for especially accurate
measuring applications. A linear motor driven, non-contact
air bearing x-y stage guarantees best precision motion during
stage movement. Hence the MicroGlider® measures profile,
topography, roughness, and coating thickness with further
enhanced accuracy. The MicroGlider® is also equipped
with a CCD camera for easy sample positioning and can
automatically perform predefined measurements. |
|
On-line thickness measurement systems for:
* flat films and sheets, thermo-formed sheets made of PET, PVC, PUR, etc.
* coexruded film
* coated and uncoated rubber sheets
Thickness range: 10 µm ... 6 mm
Measuring uncertainty: 1 % of reading
The measuring system is unaffected by variations in density, humidity and colour of the material t be measured as well as unaffected by variations in temperature or vibrations of the surrounding fields. |
|
The Spectra Optical Comparator is an affordable precision comparator. Bright images and interchangable lenses make the system versatile and easy to use.
Floor and Bench Models
High Contrast 14"Screen
Bright Images
10X to 100X Quick-Change Lenses
All Metal Design
High Resolution, Long Focal Length Lenses
12" x 6" x 3" Travel
Available with Edge Detection
Available with InSpec Metrology Software |
|
Features:
- 16"(400mm) Vertical screen for optimum viewin
- Erect profile image with fully corrected surface reflection image
- High resolution ground glass screen with calibration reticle, 90 degree cross lines and chart clips
- Machined chart ring with vernier protractor
- Electronic rotary screen protractor with selectable 1 minute or 1 /100 of a degree resolution
- Coated telecentric parfocal optics
- Quick change single lens mount
- Fiber optic surface illumination
- Integrated hood
- Nickel plated, completely cast iron workstage
.Triple axes solid crossed roller stage system
.Twin universal dovetails
.18" x 5" Overall size
.10" X Axis travel with "glide release"
.6" YAxis travel (rise a fall)
.110 lbs. Capacity
.±15 Degree true parfocal helix table adjustment with 5 minute vernier
- Available with 3 axes of measurement
- Optional 20" extended stage travel on "X" axis Available with internal or external edge sensing Optional swing away lamp house arm
- Optional motorized CNC full computer controlled readout systems
- 10X Lens system included
- NIST traceable calibration certificate
- 2 Year limited warranty |
|
Our VisionGauge® Digital Video Comparators (or Digital Optical Comparators) allow you to display a part's CAD file over the live image of the part itself. VisionGauge® automatically scales the CAD file to match up with the system’s optical magnification.
Our VisionGauge® Digital Video Comparator Systems are complete, ready-to-run solutions. They include a wide field of view, low distortion telecentric lens, a high-resolution digital camera, programmable computer-controlled illumination, a computer, and our powerful and easy-to-use VisionGauge® OnLine machine vision software with support for DXF format CAD file Live Image Overlays.
Our VisionGauge® Digital Video Comparators eliminate the need for films and Mylars. Many different configurations are available, with a field of view up to 3.5" and a resolution as fine as 0.1 micron.
More info at http://www.visionxinc.com/software%20systems%20and%20machines/digital-optical-comparators.html |
|
The MESA Flatness Measuring Gage provides fast, repeatable, and accurate noncontact measurements on a wide variety of surfaces. It provides feedback to grinding, honing, polishing, lapping, and super-finishing processes, permitting these machines to produce more consistent and reliable parts. The measurement results from these gages allow you to improve and refine your processes to maximize throughput and yield.
Whether your parts are automotive fuel injection systems, drive train components, medical valve seats, molds, or investment castings, MESA's precision and reliability help ensure that your parts meet pre-defined parameters throughout your process. |
|
| The Optical Micrometer is a portable instrument capable of making non-contact depth measurements on virtually any surface, curved or flat. Available with either 100x or 200x magnification, an easy to read venier scale enables the operator to optically measure the difference in height of one surface to another; an optional reticle eyepiece allows width measurements. This instrument is useful for measuring depth of scratches, cracks, blind holes, dents, pits and other surface blemishes in all types of materials. For transparent materials (i.e. glass, acrylic), the optical micrometer can measure crazing, fractures, embedded voids and material thickness. Popular in the aircraft industry, the optical micrometer may be used in the field to measure surface features on windshields, leading edges, airframes, fuselage skin, propeller blades, rotor blades, coated surfaces, plus many more. |
|
The MicroProf® is a very versatile and modular measuring tool that
is suited for a wide range of applications. No matter what you are
planning to measure, whether it is profile, roughness, topography
or film thickness, this system is a true all-rounder. Most importantly,
it is very easy to use, expandable, can be automated and
provides instant visible results for a time - and
cost efficient operation. |
|
Wyko NT9800
The Wyko NT9800 Optical Profiler delivers rapid, non-contact, 3D measurements from 0.1 nanometer up to 10 millimeters, with sub-nanometer resolution.
Wyko DMEMS NT3300
Non-contact dynamic MEMS model of the NT3300 delivers automated 3D measurement and analysis of micro-devices in motion
Wyko DMEMS NT1100
Table-top profiler with dynamic MEMS measurement option generates animations of MEMS devices in motion.
Wyko HD8100
Highest performance profiler for data storage metrology provides fast, non-contact characterization of magnetic thin-film heads, including pole-tip recession (PTR) and ABS flatness.
Wyko NT1100
Optical profiler providing high resolution 3D surface measurement, from sub-nanometer roughness to millimeter-high steps.
Wyko NT9300
The Wyko NT9300 utilizes Veeco's ninth-generation optical profiling sensor technology to provide fast, highly accurate 3D surface topography measurements from 0.1 nanometer up to 10 millimeters. The extended, large scan capability makes this system ideal for large-region, stitched, and irregular samples. |
|
| Optical applications are broad and varied. Testing at design wavelength is critical for final alignment and system qualification. Lithographic, DVD, and Infrared imaging lenses all require testing at design wavelength and represent broadly-varying wavelength requirements. ZYGO, long recognized as the world leader in interferometric testing, has designed and built many specially-equipped interferometer systems, including those meeting the most demanding requirements, from the deep ultraviolet to the far infrared. ZYGO offers complete solutions including interferometer mainframes, transmission flats and spheres, mounts and accessories to support numerous wavelengths and testing applications. |
|
Building on the proven reliability of ZYGO's trusted NewView optical profiler, ZYGO's NewView Delta provides important operational and performance enhancements which make it easy to measure precision parts right on the factory floor. The NewView Delta extends the field of view up to a full 30 mm diameter, enabling you to measure the critical area of most precision parts in one shot - no multiple measurements, no waiting. It's fast, it's accurate, it's repeatable.
Two models are available: the NewView Delta SA is designed to be used primarily with one microscope objective for a single type of measurement (flatness, roughness, step height, etc.).
The NewView Delta DA sports two super-long-working-distance (SLWD) objectives on a shuttle, making it easy to switch between two different measurement types (typically roughness and flatness) on the fly. You don't even have to change software setups - the NewView Delta senses which objective is in use and automatically uses the appropriate MetroPro® measurement configuration. |
|
MEASURES THE FLUSHNESS OF WELDS, RIVETS & SCREW HEADS :
Measure the height (or depth) of rivet and screw heads and the flushness of welds; direct to .0005" instantly and with great accuracy.
Easily maintain Mil Spec riveting standards of + .005"/-.000" for flushness. Use whenever flushness, smoothness, and non-interference must be controlled. |
|
Features:
- Self centering sleeve eliminates operator influence for extremely accurate applications
- Non tipping design offers fast / simple accurate results
- Available with a dial or digital indicator or can be fitted with LVDT probles sleeves which is ground approximately .001" smaller than the lower limit of the bore being inspected
- Single dial unit housing can be used with interchangeable plug heads
- Plug heads available in any size between . 078" - 9.00" (2.0mm - 230mm)
- Plug heads: choice of 3 "H" dimensions allows measurement of thru bores, blind holes or super blind holes
- Optional Armoloy coating (Rc 72-74) on plug head |
|
●Pocket-size & economically price
●Large measuring range suitable for most materials
●Measures flat, outer cylinder and sloping surface
●Both Ra and Rz parameters in one instrument
●Features external calibration at keyboard
●Standard conform to ISO and DIN
●Rechargeable batteries, work while charging
|
|
Notes:
- Measuring range: 350 µm/180 µm/90 µm (changes automatically)
- Pick-up: Inductive skidded pick-up, 2 µm (80 µin) stylus tip, measuring force approx. 0.7 mN
- Unit of measurement: Metric, inch
- standards: DIN/ISO/JIS/ASME
- Traversing length Lt* 1.75 mm, 5.6 mm, 17.5 mm; automatic (0.069 in, 0.22 in, 0.69 in)
- Traversing length (acc. to MOTIF): 1 mm, 2 mm, 4 mm, 8 mm, 12 mm, 16 mm (0.040 in, 0.080 in, 0.160 in, 0.320 in, 0.480 in, 0.640 in)
- Cutoff lc*: 0.25 mm, 0.8 mm, 2.5 mm; automatic (0.010 in, 0.030 in, 0.100 in)
- Short cutoff*: Selectable
- Number of cutoffs selectable 1 to 5
- Filter* Phase-correct profile filter (Gaussian filter) acc. to DIN EN ISO 11562, special filter acc. to DIN EN ISO 13565-1, ls filter acc. to DIN EN ISO 3274 (can be disabled)
- Parameters 24 (with tolerance limits): Ra, Rq, Rz equiv. to Ry (JIS), Rz (JIS), Rmax, Rp, Rp (ASME), Rpm (ASME), Rpk, Rk, Rvk, Mr1, Mr2, A1, A2, Vo, Rt, R3z, RPc, Rmr equiv. to tp (JIS, ASME), RSm, R, Ar, Rx
- Languages: 14 including 3 Asian languages
- Memory capacity: Max. 15 profiles, max. 20,000 results
- Calibration function: Dynamic
- Other functions: Blocking of settings (code-protected), date/time |
|
Portable Surface Roughness Measurement Surftest SJ-201:
- Light, compact body and simple operation
- Surface roughness measuring instrument operable in much the same way a hand tool is used
Portable Surface Roughness Measurement Surftest SJ-301:
- Pursuit of operability and various needs
- Ultimate solution of compact surface roughness measuring instruments
Portable Surface Roughness Measurement Surftest SJ-400:
- Allows skid-free measurement regardless of compactness
- Compatible with waviness profile and minute step measurement |
|
Precision measuring probes:
- for universal applications
- stroke length 10 / 30 / 48 mm
- mounting on shaft sleeve
- mounting via tapped holes on body (DIT 30, DIT 48)
- cable lifter
- version with rubber bellows (DIT 30, DIT 48) |
|
|
|
Metrology equipment
