|
|
| 3-D touch probes from HEIDENHAIN were conceived for use on equipment tools – in particular suppliers of milling machines and machining devices. 3-D touch probes help to save costs in the workshop and in medium-size production runs: NC controls can automatically run setup, measuring and verification tasks – and most controls can also run them under program control. |
|
Features:
» Gemodek Probe
» Probes
» Probe-Changing system
» Optical industrial measuring systems
» Handbox
» Wireless control panel
» Control panel
» Marking tool |
|
One probe head for every inspection task.
With its own family of probe heads integrating a high-precision SWISS MADE
mechanics, TESA offers a complete solution for three-dimensional measure-
ment. |
|
Your Vibration Isolation Stage for Nanosurf AFMs
The Nanosurf isoStage — the world’s smallest commercially available active vibration isolation system — is available with adapted Sample Stages for Nanite, Mobile S and easyScan 2 AFM systems. The isoStage allows for placement of the Nanosurf Micrometer Translation stage and easyScope as options for your convenience. It is the optimal isolation solution for your Nanosurf AFM systems, and protects your scans against vibration disturbances.
The isoStage features active isolation in all six degrees of freedom, is extremely small, and moderately priced! The isolation effect begins at 0.6 Hz and reaches 99.0% isolation (–40 dB) at 10 Hz. The setup of the isoStage Table is exceptionally easy. It does not require any adjustment or tuning prior to use. Just place your AFM on the isoStage as you would for your normal Nanosurf Sample Stages, pull the transport lock buttons, turn on the isoStage, and that‘s it! |
|
Solartron Analogue Gauging Probes incorporate a precision linear bearing, which gives exceptional repeatability.
• Spring Push
• Pneumatic Push or Vacuum Retract
• Feather Touch
The ultimate in rapid, high accuracy measurement. |
|
Irrespective of their type, all precision levels are based on long-time stabilisation and
reliability, but also on a free measuring base – the centre of the earth. Due to the grav-
itation, the liquid with embedded bubble of gas or the gravity pendulum indicates the
horizontal or vertical level based on this natural reference. Electronic tiltmeters or
spirit levels measure the position of the pendulum compared to the measuring faces
fitted on the tool body. |
|
XT Bore Gauges
Superbore Bore Gauges
Specialised Bore Measurement
SmartPlugs
Digital Professional cylinder Bore Gauges
Mechanical Cylinder Bore Gauges
|
|
| Bowers XT Analogue Bore Gauges are an economical solution to accurate shop-floor bore measurement. The extended mechanical travel of these advanced two or three point gauges ensures that exchanging measuring anvils is now unnecessary. Their wide application range, 2 - 300mm, rugged construction and easy read scale, ensure both accuracy and ease of use. XT measuring heads and setting rings are supplied with UKAS certification. |
|
| The PC 2200 is a state of the art flexible electronic/air column capable of operating with air gauging products and measuring probes. The advanced new column contains a multitude of measuring functions including static and dynamic gauging, classification grading, probe mixing, (A+B), (A-B), etc. |
|
The CMS non-contact capacitive based hole and countersink measurement system has been established as the benchmark in measuring critical holes for military and commercial aircraft manufacturers around the world. Based on its ease of use, speed (measurement accomplished in a few seconds) and extreme accuracy ( /- 5 microns),
It has gained in popularity at various Airbus locations throughout Europe. The CMS system is particularly well adapted to the measurement of tapered holes based on its multi-sensor (48-sensor) approach to inside diameter mapping.
The addition of the CMS product line is a natural extension for Capacitec as they are currently the market leader in the supply of capacitive non-contact gap and displacement measurement sensor systems to the Aerospace market.
For further information, please contact :
Capacitec Europe
16 Rue Sejourné- 94044 Creteil – France
(33) 1 43 39 48 68
eurosales@capacitec.com
|
|
MEASURING PLUG FOR INSPECTING BORE DIAMETERS
M1 Star is a highly advanced line of measuring plugs developed by TESTAR, a MARPOSS division, for inspecting bore diameters.
The M1 Star MBG (Mechanical Bore Gauge) is the ideal manual instrument for precision measuring of inside diameter, ovality or taper. |
|
Developed and manufactured at Bowers Bradford Site, this new range of internal industrial measuring devices - Bowers SmartPlugs are designed to give the operator great speed of use, unmatched measuring accuracy and superb repeatability.
|
|
Super Caliper:
- Waterproof and solar powered, with enhanced charge functions
- Top-ranked digital caliper
ABS Coolant Proof Caliper
- Waterproof type available even at worksite.
- Two types of protection levels IP66 and IP67 are provided.
ABS Digimatic Caliper:
- LCD Character Height is 20% increased
- Further smooth slider surface
- Abundant lineup of calipers such as models with no output and with carbide-tipped jaws |
|
- Standard workshop model with stop screw
- Assembly slider model
- 4-way measurement
- Made of hardened alloyed stainless steel
- Chromed scale with engraved graduations
- Measuring surface is micro-lapped
- Packed in plastic box |
|
Calipers are the most popular length measuring instruments used worldwide. Owing to their
simple construction, ease of handling and quick operation, they are the favourites in dimensional
measurement. The wide variety of forms and shapes available with exclusive measuring faces
make them the universal hande-held tools. |
|
Features:
» Digital calipers
» Dial calipers
» Pocket calipers
» Workshop calipers
» Marking calipers
» Special calipers
» Depth calipers |
|
PROBES
• Capacitive absolute measuring probes, plunger type
• Resolution 0.0001 mm
• Measuring range from 2 to 50 mm
• Cable up to 20 meters (standard 1.5m)
• Bead bearing and / or integrated vacuum lifter available with P2 and P5
• Interchangeable contact point M2.5
• Clamping stem Ø 8-h6
• Compatible with the D80S, D90 and D100S display units
• Compatible with the TSM mesuring column
• Compatible with the E25 data collector
D80S
• Display unit with 8 analog channels
• CCFL graphic indicator with backlight
• Resolution up to 0.0001 mm
• Input for 1 Sylvac probe P2 to P50
• Extension to 8 probes using D102 or D108
• RS232 Input / Output
• Analog and Opto-coupled output (command signal) |
|
The Concentromat is a universal gage for checking the concentricity of the round parts having diameter of 1mm to 25mm. Used for checking External dia., Internal dia and Curved surface.
Includes:
-Base
- Two "V" blocks with four replaceable pins.
- Carbide stop, which is flat and perpendicular to the "V" blocks.
- Industrial roller device.
- Retractable articulated arms test indicator holder (indicator not included).
All parts can be easily moved and set along the base, enabling the adjustment for different geometries of parts to be tested. |
|
| The Bowers Depthmatic Digital Depth gauge has a fast slide action to allow the user to quickly and accurately measure plain depths or other features such as groove widths, etc. Simple screw-in extension rods allow depths of up to 300 mm to be measured. The standard gauge can be modified for awkward applications by professional fitting alternative bridges, longer reach extensions, or specialised contact points. |
|
Tubular Type Depth Manufacturers of micrometer: This spindle integral-type enables stable measurement.
Interchangeable Rod Type Depth Micrometer: Allows wide-range measurement with a single unit by replacing interchangeable rods.
Depth Microchecker: 2 models with a maximum measuring range of 150 mm and 300 mm. |
|
- Standard workshop model made
of alloyed stainless steel
- Available with hook (H) or
without hook (B)
- Screw stop solid slider model
- With professional laser engraved graduations
- The scale shows mm value
- Measuring surface is micro-lapped |
|
Large sizes in mechanical engineering mean dimensions in excess of 500 mm.
Besides various measurement procedures like those that apply large internal or external
micrometers with two-point contact, tape rules (wrapping round the outside diameter),
V-bases, rotating measuring disks (rolling-contact) and optical systems (triangulation
with industrial theodolites), resort is often to make use of simple testing means like fixed gauges
(inside calliper gauges), gauge blocks combinations or telescopic adjustable gauges. |
|
List of Dial Indicator: List of functions implemented in various models of dial displays.
Compact type Dial Indicator: Compact type with a maximum professional scale frame diameter of 41 mm.
Dial Indicator 2046S: 10 mm-stroke, regular dial indicator with a minimum reading of 1/100 mm.
Large Dial Type Digimatic Indicaor: Large dial type with a measuring range of 20 mm or more. |
|
|
|
Metrology equipment
