|
|
The TCIC is Low cost high speed 8 channels thermocouple measurement interface board with USB and RS-232/485 interface. The TCIC supports thermocouple types J,K,E,R,S,T or ±500 millivolts at 1 microvolt resolution.
Main features:
On board cold junction compensation
On board temperature conversion functions enable stand-alone operation
USB interface as standard or USB + RS-232 /RS-485 (option)
Multiple boards may be connected via USB or RS485
8 opto-isolated outputs configurable as setpoints, latching professional alarms or user outputs
Comes with very useful professional software package and data logger
|
|
From simple Component Mounting Functions to more complex electronic operations, Connectwell can do the interfacing for you.
Our Standard range of interfaces includes:
- Relay interfaces
- IDC/DSUB Connector specification to Discrete Converters
- Component Housings
- Power Distributors for Electronics
|
|
The main task of interface units is the trouble-free conversion of standardised plug-in connector systems to single conductor wiring or to another connection system.
Given the need to reduce costs in switch professional cabinet construction, interface units offer an alternative to wiring concepts with point-to-point wiring.
The prime function of interface units is to act as a trouble-free adapter element between standardised plug connectors suppliers and point-to-point wiring or other connection systems.
Advantages of the interface units:
Two- and three-storey PCB terminals save space
Conventional point-to-point wiring only needed on one side to save costs
Greater safety, preventing wiring errors
Optional: LED status display on the interface units
Rapid troubleshooting with additional test and industrial measuring devices
Simplified initial commissioning and documentation.
|
|
In addition to components for measurement and automation, Endress+Hauser offers competent automation solutions for the process industries. These are scalable and range from simple measurement applications through intelligent fieldbus networks to autonomous process automation units.
Our automation solutions include specific process application know-how, innovative hardware and software platforms as well as expert knowledge of field communication systems such as HART, PROFIBUS and Foundation Fieldbus, including their respective configuration tools.
|
|
2 channels analog professional converter - BXMT series - Galvanic insulation - Rail Mounting
2 channels
Input signal (from hazardous area): 4-20 mA
Output signal (to safe area): 4-20 mA
24-48 VDC, 110 VAC or 230 VAC
Front face LED
Loop checking
Connection : plug-in cage clamp suppliers terminals
1 input / 2 output version available
Agreement : ATEX 94/9 CE
4-20mA loop galvanic insulation - BXNI Series - Rail Mounting - Galvanic insulation
Input signal (from safe area): 4-20 mA
Output signal (to hazardous area) : 4-20 mA
No power supply suppliers required
Front face LED
Connection : plug-in cage clamp terminals
Agreement : ATEX 94/9 CE
|
|
Intrinsically Safe galvanic isolated power supply suppliers for industrial transmitters (BXMT,
BXLT, BXNT) or smart transmitters using "HART" protocol (BXMTI, BXLTI,
BXNTI).
2 wires transmitter power supply.
Number of channels :
2 inputs / 2 outputs (BXMT, BXMTI)
1 input / 2 outputs (BXLT, BXLTI)
1 input / 1 output (BXNT, BXNTI) |
|
Frequency Input
Most compact device in its class, 2 versions available:
limit value switch, frequency/current conversion, impuls divider function within 17.6 mm width
dual channel frequency/current conversion within 17.6 mm width
Line fault detection indicated by LED and potential free relay contact allows easy monitoring and speeds-up troubleshooting
Broad input frequency range 0.001 Hz ... 20 kHz
Galvanic isolation between input and output
Installation possible in Zone 2
Analog Input
Analog Output
Professional transmitter Supply Unit (Field Circuit Exi) Type 9160
Transmitter Supply Unit with Limit Value (Field Circuit Ex i) Type 9162
Isolating Repeater HART Input Type 9163
mA - Isolating Repeater Type 9164
Digital Input
Isolating Repeater Type 9165
Isolating Repeater Loop Powered (Field Circuit Ex i) Type 9167
Digital Output
Switching Repeater Type 9170
I.S. Relay Module Type 9172
|
|
MTL offers the best choice in DIN-rail and backplane mounting isolators to meet the requirements of modern systems.
The DIN-rail mounting MTL5000 series isolator range provides a wide choice of functions with high accuracy and reliability.
The backplane mounting MTL4000 series is established as the leading IS system interface with solutions for all the major DCS companies.
The NEW MTL4500 Series is the latest generation of backplane mounting products, building upon the heritage of MTL4000 and introducing many key application benefits.
MTL also has key modules, in the MTL4000 and 5000 series ranges, fully certified to the IEC61508 functional safety standard for use in safety instrumented systems.
Improving upon the widely adopted, enormously successful, "industry standard" MTL4000 Series was a big challenge but the innovative MTL4500 Series includes several new features for backplane mounting isolating interfaces.
This new family easily integrates with the I/O equipment of all major instrumentation and DCS suppliers in the same secure manner as its predecessor.
* Rapid install-and-release mechanism
* Highest packing density on the market
* Single and multi-channel I/O modules
* 3-port isolation with low power dissipation
* Compatible with MTL4000
|
|
| Programmable professional converter for measurement signals with easy programming by ProgressXmanager software (RS 232 connection). |
|
Order Code K107A:
- Power suply: 19,2..30 Vdc
- Serial port 1: RS485
- Serial port 2: RS485 Half Duplex
- Isolation: 1,5 kV (50 Hz, 1 min)
- Automatic handshake
- Speed rate 1.200..115.200 bps
- Dimensions (w x h x d): 93,1x102,5x6,2 mm
|
|
PA-3000 ICP® (IEPE) signal conditioner - Description
The PA 3000 is a portable 3-channel ICP® ( IEPE ) signal conditioner. It has 4mA/24V supplies for sensors with integrated professional amplifiers. For low level signal amplification it features three selectable gain ranges and individually selectable highpass- and lowpassfilters for all three channels. Indicators for sensor condition and signal overload further minimize the risk of handling errors. The integrated rechargeable accumulator ensures a long operating time and the unit may be charged and operated at the same time. It is also possible to control all settings via PC using RS-232 interace.
The PA 3000 has a durable aluminum housing and a membrane keypad withstanding dust and moisture.
The low noise, wide dynamic range and excellent accuracy make the PA 3000 an excellent choice for demanding measurement applications.
ICP® is a registered trademark of PCB Group, inc., Depew, New York |
|
ATX series Multi-Channels DC Professional transmitter
The transformer isolation among any input and output, the multi-channel designed and variety of in/out selection, DIN rail mounting and wall mounting, Accurate and low cost
It is perfect for DC signal conversion for PLC MANUFACTURERS or industrial recorder, or for isolation between input and output
Specifications:
AccuracyF }0.1% FS. ( at 23Ž )
LinearityF }0.1% FS.
Response TimeF ƒ 0.2 sec ( 0 - 90% )
Temp. CoefficientF }0.015% FS / Ž
Insulation ResistanceF† 100 Mƒ¶ with 500 VDC ( Input to Output to Power )
Dielectric StrengthF IEC 688
AC 2 KV 50/60 Hz,1 Min. ( Input to Output to Power )
AC 2.8 KV 50/60 Hz,1 Min. ( Input,Output,Power) to case
Impulse SurgeF Common Mode & Differential Mode
IEC255-4,ANSI C37.90a 5KV ( 1.2x50 ƒÊs ) |
|
eNod 3 : Digital measurement power 3 !
· 24 bits conversion, up to 1 600 meas./s.
· Digital professional filters
· RS485/232 and CANBus outputs, MODBus-RTU and CANOpen
ENod3 offers a low-cost and powerful solution to convert any strain-gauge sensor into an intelligent digital system:
- Digital high speed professional transmitter
- Dynamic scale controller (Checkweigher)
- Peak value detection
Control the power of numerical filtering with eNodView freeware:
· Complete eNod setting up
· Measurement acquisition and displaying
· Signal analysis
· Digital filters simulation |
|
| The SX500 system consists of programmable analog conditioners and professional filters that are used in computer-based measurement systems. The basic components of this system are the mainframe, a chassis housing the supplier of power supply and multi-pin cable connectors manufacturers, and the filter and conditioning modules. Each of these components also has provisions to accept a variety of factory-installed options that can extend the capacities of the components or further determine specific functional attributes. The SX500 is a fully programmable system with communications via a RS-232/422 serial port. The below list introduces the available products. |
|
Your measurement is only as good as the signal path, so why compromise on signal conditioning? Genesis supplier of signal conditioners are daughter cards mounted integrally with the acquisition module in the same slot. This concept allows for future plans and expansions while maintaining the standardized feature set without compromise.
The basic professional amplifier signal conditioners give you 8 channels with single-ended or unbalanced differential, isolated inputs on one board. With 200 kS/s or 1 MS/s digitizing rate at 16-bit resolution, they are ideally suited for high definition transient recording.
The 200 kS/s and 1 MS/s bridge amplifier versions comprise everything that you would expect from LDS Nicolet. They offer isolated and differential inputs, high gain, and extremely good SNR even at the maximum 400 kHz bandwidth. Both versions come with on-board professional software, selectable shunt calibration and bridge completion resistors, a bridge wizard for error-free setup and fast auto balance.
The unique high-end universal amplifier serves a variety of needs, ranging from differential and/or isolated measurements to ICP®-based vibration or shunt-based current measurements. Apart from the differential mode, the amplifier supports any type of 'constant current' vibration and acceleration transducers. In "current mode", the built-in shunt can be used to measure up to 1 ampère in a industrial safe, isolated and fused manner, without the need for external shunt resistors.
As a special input board, the binary marker input CT enables up to 64 "digital" channels to be recorded as well. This board can be used to record status signals from the process or test like high/low, open/closed or left/right. It also offers three counter/timer inputs to do frequency or RPM measurements as well as to record quadratur professional encoder signals.
A special variant of this board is the binary marker input HV. This is similar to the CT version, but offers fibre-optic isolated inputs and a fiber-optic SYNC line for use in HighPower/HighVoltage environments.
For ultra fast signals, the 25 MS/s and 100 MS/s fast digitizers are equipped with four channels sampling at an incredibly high speed. With selectable anti-aliasing filtering and 14- or 15-bit resolution, these inputs turn the Genesis into the fastest transient recorder ever seen. The fast digitizers are available in single-ended versions or with fully differential inputs.
|
|
Analog
Channel Expansion & Signal Conditioning
ISO-5B Analog Input Module Racks
ISO-5B Analog Output Module Racks
ISO-5B Series Modules
Simultaneous Sample & Hold Boards
Digital
DIN Rail Mounted Solid State I/O Modules
Electro Mechanical Relay Racks
Solid State Relay Racks
Solid State Relays for SSR-RACK48 Products
Solid State Relays for all other products
|
|
DEMOD-DVRT
- Designed for ease of use and general versatility, these printed circuit cards provide complete conditioning for DVRTs.
DEMOD-DVRT-TC
- Designed for ease of use and general versatility, these printed circuit cards provide complete temperature compensated conditioning for DVRTs.
DEMOD-DC®
- Advanced microelectronics are packed within a micro connector to provide complete conditioning of MicroStrain's DVRT® sensors.
Motherboards, Enclosures and Power supply units
- Multichannel enclosures designed to easily house, power and control DEMOD-DVRT and DEMOD-DVRT-TC cards.
DEMOD-DIN
- Designed for ease of use and general versatility, these enclosed DIN rail mountable cards provide complete temperature compensated conditioning for DVRTs. |
|
The Vulcain 420I communicates digitally with Vulcain professional transmitters within a true daisy professional chain network, converting the transmitters’ digital signals to analog outputs. This allows each transmitter to provide a 4-20mA signal to a BMS from one central location. The unit can accommodate up to eight transmitters installed at distances of up to 2 000 professional feet from the unit.
To avoid expensive DDC hook-ups and BMS professional software upgrades, the unit even comes with internal logic that will provide averaging/minimum/maximum reading for up to 16 transmitters. |
|
Models 781 and 786 Signal Conditioning Units These reliable industrial signal conditioners deliver peak performance from your Miniature Tilt Sensors. The compact Model 781 operates one dual-axis sensor or two single-axis sensors and uses an external power supply supplier (not included). The rack mountable, AC-powered, Model 786 operates from two to sixteen sensor channels, expandable two channels at a time. Both Signal Conditioning Units provide two switch-selectable gains and two low-pass professional filter settings for every channel. |
|
We offer a variety of professional displays from simple single-channel devices
to networked multi-channel MODULAR 600 systems.
|
|
Chart SX9130 (format Europe) makes it possible to condition all the types of sensors LVDT and RVDT: Half bridge 3 wire, differential 4,5 or 6 wire, ratiometric 5 and 6 wire
It is entirely personnalisable according to your application:
- Tension excitation (until 7,5V rms)
- Frequency of excitation (between 900Hz and 15.000Hz)
- Correction of dephasing |
|
|
|
Signal conditioners
