|
|
Apart from noise generated by hand held pneumatic air tools, the inherent vibrations are a health risk for everyone who has to work with such tools over a longer period of time. People who work with pneumatic hammers on a daily basis are subject to the so called "white finger disease". Painful inflammation can be the result and under special circumstances, such as hard knocks hairline cracks in the bone mass can appear.
Passive measures to reduce vibration such as special professional gloves have not provided the desired success. Red Rooster has reduced the vibration through design measures to an acceptable level. |
|
these professional chisel compacts are used in soft formations
where fast penetration rates are possible and tooth breakage is minimal. |
|
Chisel hammers
Choose the tools that give the best results in the toughest working conditions, yet are easy on the operator. These are effective, reliable tools for fettling of castings, chipping operations in the mechanical industry, hole making and light demolition of concrete.
- RRF21/31 have a sturdy D-handle in light metal alloy for high power-to-weight and steady grip. The compact, vibrationcontrolled (2.5 m/s2) design offers good accessibility and ease of use.
- RRD37/57 are light, quiet and have a long service life. They have light alloy tool casings, very low vibration (below 2.5 m/s2) and noise levels, vibration damping in both hand grips, and piped away exhaust.
Atlas Copco chipping hammers of type RRC are used mainly: in foundries, in the heavy engineering industry and for holemaking and light demolition in the building industry.
- Dependable their robust construction makes them highly dependable.
- Efficient RRC65 and RRC75 have a blow rate which makes them particularly suitable for roughening.
- Professional chisel retainer for safer jobs all chipping hammers are delivered with a chisel retainer as standard. For the same reason, you should go in for a tool that you can guide via the machine itself and not by holding the chisel.
As standard, Atlas Copco chipping hammers of series RRC are delivered with a standard ISO hexagon manufacturer of nozzle (-01) or a round shank nozzle (-02). |
|
Industrial Tools
Your success is our success
The innovation drive at MANNESMANN DEMAG Drucklufttechnik KG knows no compromise. And the permanent
technical further development of our quality industrial tools always has utmost priority
for more customer benefits.
Focal aspects in the development of new precision tools are therefore
- improvement of performance data,
- extension of the product service life,
- reduction of noise emissions for an added environmental benefit,
- perfection of ergonomic design to make life easier for the worker
In development and design, MANNESMANN DEMAG Drucklufttechnik KG has always used state-of-
the-art technology - from the first CAD 3D drawings right through to the thoroughly tested
end product. |
|
PowerMaxx Li Pro
Variospeed (V) electronics
20-level adjustable torque, plus drilling level
Motor with integrated air cooling
Clockwise and anticlockwise rotation
Quick stop
Suppliers of spindle stop gear for manual turning of screws
Spindle with hexagon recess for screwdriver bits
Pistol grip for optimum power transmission in direction of drilling
Fatigue-free operation due to perfect ergonomy
Rubber-coated handle
3-level planetary metal gears
Sturdy die cast gear housing
Powerful Li-Ion battery pack. No memory effect!
Charger (charge time approx. 1 hours) |
|
SBZ 14.4 Impuls
Selectable impulse mode
Variospeed (V) electronics
5-level adjustable torque, plus drilling level, plus impact drilling level
Clockwise and anticlockwise rotation
Quick stop
Sturdy quick-action keyless professional chuck with metal sleeve
Quick-action keyless chuck and spindle manufacturers stop gear for convenient one-hand tool change: Metabo "Quick"
T-handle for optimum centre of gravity
Fatigue-free operation due to perfect ergonomy
3-level planetary metal gears
Gentle gear change
Built-in collector professional fan to prevent overheating
Bit case for two bits
Maximum system flexibility through free combination of chargers and battery packs (within a voltage class)
Easy and quick change of battery pack
Li-Ion battery packs for up to 40% more power with up to 40% less weight. No memory effect!
|
|
Tradition and Innovation
After 25 years of high professional production mineral exploration, Atlas Copco knows that to consistently hit pay dirt, your professional drill has to work fast, dig deep, and keep working no matter what the rock, weather, or machinery throws at you. This is the mindset behind the Atlas Copco RD10+ hydraulic tophead drive exploration drill. It's a tough high-speed, reverse circulation drill that delivers the depth and durability to bring results. |
|
Highlights:
- Versatile through our distance plate up to Ø 500 mm and 5.2 kW power
- Precise working made easy thanks to our easy adjustable, low-wear steel-bronze professional guides
- Use the extension tracks if you need more penetration. Available from 230 mm up to 910 mm
- High-quality steel toothed rack paired with precise, integrated steel guides
- Wire Professional saw SK-B may be mounted on this professional drill stand
|
|
Electronic Combination Hammer KHE 56
Suitable for bits and accessories with SDS-max shank end
With the appropriate accessories, it is also suitable for bits and accessories with spline shank or ratio thread
Rotation stop for chiselling
Metabo VibraTech (MVT): reduced vibration levels and therefore less impact on joints due to the integrated damping system on the handles
Additional handle can be fitted to three places on the housing
Optional 30% impact reduction setting for working with more pliant materials, such as brick
Vario-Tacho-Constamatic (VTC) full-wave electronics for infinitely variable speed change. Speed automatically remains constant under load.
Electronic soft start for precise spot-drilling
Pneumatic high-performance hammer mechanism for effortless drilling in stone and concrete
Optimum heat dissipation and low weight by magnesium die cast gear housing
Torque limiting professional clutch to limit any sudden reverse torque that can occur if tools jam or get caught.
Stoppable switch for trouble-free chiselling in continuous operation
Professional chisel can be fixed in 12 positions
Auto-stop carbon professional brushes to protect the motor
The service display, for example, indicates when the carbon brush needs to be replaced, plus an LED indicating mains voltage |
|
UHE 28 Multi
Suitable for bits and accessories with SDS-plus shank end or cylindrical shank end (without impact)
Industrial hammer stop for drilling in rotary only mode
Rotation stop for chiselling
Metabo "Quick" chuch change, thereby quick change of hammer professional chuck for hammer drilling and chiselling and quick-action keyless chuck for drilling and fastening screws
Metabo CODE! System: electronic anti-theft system at the touch of a button.
Clockwise and anticlockwise rotation
Vario-Tacho-Constamatic (VTC) full-wave electronics for infinitely variable speed change. Speed automatically remains constant under load.
Thumbwheel for preselection of speed
Robust Metabo Marathon motor for extra long service life
Two-speed gear unit: two drilling speeds for drilling in wood and metal (no impact)
Pneumatic high-performance hammer mechanism for effortless drilling in stone and concrete
Die cast aluminium gear housing for optimum heat dissipation and stability
Ergonomic housing design for fatigue-proof operation
Rubber-coated handle: vibration-reduced, comfortable and safe
Metabo S-automatic torque limiting professional clutch: to limit any sudden reverse torque that can occur if tools jam or get caught.
Metabo winding protection grid to protect the motor from abrasive effects
Overload protection by electronic monitoring of coil temperature. LED for impending overload.
No-volt release professional switch: prevents unintentional machine start
Auto-stop carbon professional brushes to protect the motor
Brush wear indicator |
|
Multihammer P'7911
Diverse range of uses: for hammer drilling, chiselling, drilling without impact and screw-driving
Exclusive housing design made of high-quality materials such as aluminium and carbon
Good centre of gravity and power transmission due to patented handle position at the top of the housing
Two-speed gear unit
Metabo "Quick" professional chuck change
Hammer stop
Rotation stop
Clockwise and anticlockwise rotation
Variospeed (V) electronics
Pneumatic high-performance hammer mechanism
Suitable for bits and accessories with SDS-plus shank end or cylindrical shank end (without impact) |
|
BP 3-10
This variant of BIAX Drilling machine is very useful for robust use. Suitably this tool has a very good engine power.
BP 0,5-10
This variant of BIAX Drilling machine is very useful for robust use. Suitably this tool has a very good engine power. |
|
Atlas Copco pistol-grip professional drills are suitable for most drilling tasks in virtually every sector of industry.
Comfortable grip for high precision.
Cost-saving.
Two-hand grip available.
Lubrication free.
The new LBB36 with its high power gives:
Faster operation
Better hole quality
Reduced risk of stalling
They are strong, reliable and thanks to the professional chuck guard easy to guide, producing perfect holes every time. |
|
CP Industrial professional drills:
These tools are suitable for high production rates such as those on production/ mounting lines, where high durability is required and the tools are used frequently. Our industrial tools combine the best of quality, durability and ergonomics for your most demanding applications.
|
|
Fours models available in three versions to meet all your application :
- hand held for construction and quarrying
- air leg for mining
- semi-stopper or stopper for tunneling or bolting
|
|
Description:
- Punch 16 and 18 gauge structural studs in 5 seconds.
- Punch 200 holes per battery charge, 2 professional batteries included eliminating downtime
- Punches a 1.34 (34.1 mm) diameter hole in 16 (1.5 mm) guage steel. For use with Greenlee 712A bushings.
- Swivel head rotates 360° for use in tight corners.
- Pistol grip handle gives better leverage and reduces fatigue.
- Replacement punch and die.
- Lightweight 9.2 lb. tool provides heavy-duty performance. |
|
|
|
Drilling tools
