|
|
Wrapped Charge Air Hoses
Hoses and Hose Lines for Charge Air
Charge air hoses are air conduction hoses that counterbalance the relative movements of the various units of the supercharged vehicle power unit.
Depending on the materials selected, these charge air hoses (NW 60 to 180 mm) operate mainly in commercial vehicles under temperatures of between 50°C and 260°C and a pressure of -100 kPa to 500 kPa (overpressure).
The flexibility of these hoses is determined mainly by their geometrical configuration and the optimum integration of defined folds.
For less-complicated applications, we manufacture connecting sleeves in all the most commonly used diameters.
|
|
Textile Air Hose - Novaflex 1000
Textile Air Hose - Novaflex 1011
Hot Air Blower - Novaflex 1208
Hot Air Blower - Corrugated - Novaflex 1971
Oxygen Charging Hose - Novaflex 9131
Oxygen Charging Hose
|
|
|
Goodyear offer a range of General purpose , Heavy duty and Push on hoses suitable for the air industry.
|
|
Goodyear offer a range of General purpose , Heavy duty and Push on hoses suitable for the air industry.
Visit our website below for a complete list of the hoses available
|
|
| ... products without technical information |
| |
... see all the products in the category
Hoses
|
For almost ten years, Valpar has offered tubing specially designed for the automotive industry. Many leading manufacturers around the globe use Valpar fuel lines and air brake tubing. As a cutting edge innovator, Valpar has progressed and increased its portfolio to offer value-added products such as thermoformed and cut to length tubing.
Valpar manufactures a wide range of nylon airbrake to meet the stringent demands of the automotive market. Valpar nylon air brake tubing is an alternative to other materials like rubber hose and metal tubing. The benefits of nylon over other materials include:
• Great savings in weight of the tubing, making it easier to work with
• Superior resistance to elements which can effect this part of the system eg. oil, gasoline, chemicals and many others
|
|
To carry out any geometry of pneumatic network, final or temporary Atlas Copco proposes Airnet piping to you: 6 diameters of aluminum tubes and a panoply supplements connections and accessories.
Insensitive with corrosion, the Airnet system preserves the quality of the air up to the point of use and offers a major asset in the control of escapes and the pressure losses énergivores. Very smooth, the internal surface of the tubes supports the flow of the fluid, minimizing of as much the energy request. The Airnet modules are guaranteed 10 years and in conformity with the directive the DEVELOPING COUNTRIES 97/23/EC. Their blue coating of standardized color makes them easily identifiable.
Diameters: from 20 to 80 mm (3/4 inch with 3 inches)
Temperatures: of -20 C with +70°C
Maximum operating pressure: 13 bars
|
|
INFINITY
Brass push-in fittings and aluminum tubes.
Easiness and quickness of assembling.
Special patented fittings for outlet.
Diameters available: 20, 25, 32, 40, 50, 63 mm
Compatible Fluids: Compressed air, Inert gases and Vacuum
Minimum temperature: -20°C
Maximim temperature 80°C
Minimum pressure: -0.99 bar
Maximum pressure: 15 bar
UV resistant. Fireproof. Anticorrosive coating.
"MOVE THE AIR POWER"
|
|
- Aluminium pipe
- Diameters 16.5 to 100 mm (1/2'' to 4'')
- Quick connection, easy to install
- Efficient flow, no leaks
- 10 years guarantee
|
|
PIPES AND FITTINGS FOR COMPRESSED AIR RINGMAINS
System PVR (PVC alloy) and Concept ALR (aluminium) offer an easy to use, modular system for installing air networks.
|
|
Suction and blower hoses for temperatures from -20 °C up to +280 °C, DN 40 up to DN 900
Applications:
extraction af gaseous media: air conditioning and ventilation industry, suction plants, ventilation and suction, welding fume extraction (with increased spark concentration), tent heating, in areas with raised safety requirements, low pressure applications
Properties:
- highly flexible
- compressible
- small bend radius
- external steel helix protects against abrasion
Connecting elements:
- hose clamps
- hose connectors
- hose reducers
|
|
Gokser Machine Co Ltd founded in 1987 ,primarily manufactures air ducts which are capable of being bended ,folded to be reduced to be lengthened.Ducts are manufactured with different sizes and materials interms of their suitability with its ease of use,convenience and efficiency for air and other gas fluids transfer at industrial systems,with the heating rande of -40 ºC to +1100 ºC .
Please ask for our compatible prices of our high quality products
|
|
|
Polyurethane and TPV Hoses; abrasion resistant, hot-air, semi-flexible, hardly inflammable, microbe and hydrolysis resistant, food and pharmaceuticals, antistatik and electrically conductive hoses, fully flexible ducts.
|
|
|
|
|
|
Air Wipe Blow-Off System - Ring-Blade™:
Air Wipe Blow-Off System - Ring-Blade™ from Nex Flow™ is easy to mount and maintain and reduces both compressed air consumption and noise levels.
It produces a "laminar" flow of air along its 360º angle using the "Coanda" effect which "entrains" a large volume of air from the surrounding area along with the small amount of compressed air from the Ring-Blade™ air-saver wiper-blade to produce an output flow up to 30 times.
Air Wipe Blow-Off System - Ring-Blade™ pay back on compressed air savings can be as soon as a few weeks in some applications when compared to nozzle "rings" or simple annular slots used by other air wiping systems.
Blow-off, cool & clean items like pipe, cable, wire and hose with the Air Wipe Blow-Off System Ring-Blade™ from Nex Flow.
Air Wipe Blow-Off System - Ring-Blade™ Features:
- System is made of coated aluminum to provide even air flow 360º around the part.
- Designed as two pieces hinged together to open and close around the part.
- Instant on-off with no moving parts, no electricity or explosion hazard.
Air Wipe Blow-Off System - Ring-Blade™ Benifits:
- Even blow off around the part, light in weight and compact.
- Easy to install and maintain and allows removal of a continuous piece.
- Reduced compressed air use for energy savings plus lower noise levels.
- Maintenance free with output easily controlled, safe to use.
|
|
Sonic Standard Air Wipe
%u2022 For product diameter range 0.75 to 2.25
%u2022 Accommodates multiple sizes without changing out air wipes
|
|
• Blower air wipe and air knife systems are designed for any wire size and speed
• Eliminate expensive compressed air and reduce energy usage by 75%
• Products are CE Registered with IEC motors
• Sonic is an ISO 9001:2000 Registered company
• Most Blower/Motor assemblies shipped in 5 days from receipt of order
|
|
Sonic Large Diameter Air Wipe:
- For 2" to 5" diameter product range
- Accommodates multiple sizes without changing out air wipes
|
|
Streamtek's Air Wipes provide a uniform 360º airflow ideal for drying, blowoff, cleaning, and cooling of extruded shapes, hose, pipe, cable, wire and more. The unique
FEATURES
- Instant ON/OFF with no moving parts, no electricity or explosion hazard.
- Unique, split design makes it easy to clamp around the surface, eliminating the need for threading.
- Amplification up to 25:1
- Greatly reduces noise (~75dBA)
SPECIFICATIONS
Stainless steel or aluminum are materials of construction. Six standard (inside) diameters: 1" (31mm), 2" (51mm), 3" (76mm), 4" (200mm), 5" (127mm), 6" (152mm). Other sizes available upon request.
|
|
Super Air Wipe™
EXAIR's Air Wipes provide a uniform 360° airstream ideal for blowoff, drying, cleaning, and cooling of pipe, cable,
Five Year Built to Last Warrantyextruded shapes, hose, wire and more. The unique, split design makes it easy to clamp around the surface, eliminating the need for threading.
Two styles are available:
The Super Air Wipe resists corrosion and is ideal for high temperatures up to 800°F (427°C). It is constructed using stainless steel screws, shims along with a stainless steel wire braided coupling hose (for sizes up to 4" (102mm)).
The Standard Air Wipe is a good choice when stainless steel screws and shims are not required. A general purpose PVC coupling hose is included (for sizes up to 4" (102mm)).
|
|
|
... see all the products in the category
Air knifes
|
|
|
|
|
• Pitot tubes Type L : pitot tube with ellipsoidal head. An intake for total pressure and 6 holes for static pressure. Body made of stainless steel.
• Pitot tubes Type L with TCK : pitot tube with ellipsoidal head. An intake for total pressure and 6 holes for static pressure. Sheated thermocouple K probe integrated, with connection cable length 1,5 m. Body made of stainless steel.
• Pitot tubes type S with TCK : pitot tubes with TIG welding and protective tube made of stainless steel. Sheated thermocouple K probe integrated, with connection cable length 1,5 m. Body made of stainless steel.
• Air Flow Measuring blades DEBIMO : simple and cost effective method of providing permanent air flow measurement in rectangular or circular ducts. When used with a KIMO differential pressure device (pressure, transmitter, electronic micromanometer, liquid column manometer, differential pressure switch, ...).
DEBIMO air flow measuring blades ensure accurate indication, control or recording of air flow velocity and volume. Permit velocity measurements from 3 to 100 m/s (9 Pa to 10000 Pa).
Join our distribution network all over the word....Contact us !
|
|
Low inertia pneumatic brakes and clutches, also available as spring-applied emergency brakes.
Air tube concept offers sensitivity and versatility to a huge number of high-frequency industrial processes.
The multidisc system gives very high torque in a compact size.
Max. torque from 210 to 49 500 Nm.
|
|
Low inertia pneumatic brakes and clutches, also available as spring-applied emergency brakes.
Air tube concept offers sensitivity and versatility to a huge number of high-frequency industrial processes.
The multidisc system gives very high torque in a compact size.
Max. torque from 210 to 49 500 Nm.
|
|
|
... see all the products in the category
Clutches
|
The NOVAIR medical compressed air stations are designed and manufactured according to and in compliance with the European standards (ISO EN 7395-1, ISO EN 737-3). All of of our medical vacuum stations are marked as CE medical devices according to 93/42/CEE European Directive.
Medical air stations are available in a wide range of EN 737-3 compliant configurations:
- reciprocating and screw type compressors configurations
- adsorption or refrigeration medical air treatment lines
- single, duplex, triplex and multiplex sources
- horizontal, vertical, modular and shelterized configurations
- electromechanical and/or electronic control features
- output flow: from 4 to 600 m3/h
A complete range of medical air piping accessories is also available.
|
|
Mass production, all products of the same quality, subsequent components identical.
Extraction of harmful substances like dust, steam and solvents
Our pull-ring system with U-shaped seals can be used in almost every line of business because it is tight against condensed liquids.
Certificates "shock explosion proof up to 3 bar overpressure"are available on request (angle flange connection is shock explosion proof up to 10 bar).
|
|
Sub-Zero Temperatures From Compressed Air
Using only factory compressed air, ITW Vortec's Vortex Tubes generate temperatures down to -40¢XC for spot cooling in a wide variety of industrial applications and processes. A Vortex Tube separates compressed air into hot and cold air streams, lowering the supplied air temperature by as much as 40¢XC and delivering refrigeration up to 6000 BTUH. With no moving parts to break or wear out, Vortex Tubes offer reliable, maintenance-free operation and easy installation. Various models are available for specific cooling requirements and, at only 150 mm to 330 mm long, they serve as a very compact, cooling component on machinery and equipment.
|
|
|
|
|
|
Vortex Tubes With Metal Generators, Stainless Steel Body:
Vortex Tubes are devices that work on a standard compressed air supply. Air enters the vortex tube and literally splits the air flow into two parts - cold air at one end, and hot air at the other - all without any moving parts.
Vortex Tubes have an adjustable valve at the "hot" end controls the volume of the air flow, and the temperature exiting at the cold end. By adjusting the valve, you control the "cold fraction" which is the percentage of total input compressed air the exits the cold end of the vortex tube.
Inside is the interchangeable brass "generator" which can alter the air used in the vortex tube, and control the temperature ranges you wish to have at the cold and hot ends. There are several ranges of generators for compressed air capacity. There are also two basic types of generators - one to produce the extreme cold temperatures (maximum cold temperature out called the C generator) and one type to produce the maximum amount of cooling (maximum refrigeration called the H generator).
WHY USE Frigid-X Vortex Tubes over others?
Vortex Tubes - Frigid-X are constructed of stainless steel and use a generator and valve made of brass and sealed with viton o-rings to allow their use in the widest range of environments. Others use plastic generators and standard Buna N O-Rings and charge extra for brass and viton. The unique design and quality of materials used in Frigid-XT™ products will deliver years of maintenance-free operation.
Frigid-X™ Vortex Tubes Advantages:
- No moving parts, reliable, maintenance free
- No coolant
- Compact and lightweight
- Low cost application
- Maintenance free units
- Instant cold air in environmental chambers
- No spark or explosion hazard
- Interchangeable generators
|
|
Adjustable Spot Cooler - Frigid-X™ is a low cost and maintenance free Adjustable Spot Cooler system which utilizes a vortex tube to produce cold air at one end.
Adjustable Spot Cooler - Frigid-X™ temperature can be adjusted using a knob at the hot end to set the temperature precisely to your requirements. Temperatures range from approximately minus 30ºF to room temperature and can be easily set with a thermometer.
Adjustable Spot Cooler - Frigid-X™ comes with three brass generators for flow rate adjustment - 15 SCFM (425 SLPM), 25 SCFM (708 SLPM) and 30 SCFM ( 850 SLPM) providing refrigeration up to 2100 BTU/hr (615 Watts).
Features:
- No moving parts or electricity
- Compact and lightweight
- Low cost
- Maintenance free
- Instant cold air
- Quiet
- Magnetic base
- Interchangeable generators
|
|
Cabinet Enclosure Cooler - Frigid-X™ series for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air.
Cabinet Enclosure Cooler - Frigid-X™ series are compact and can be installed in minutes through a standard electrical knockout. There are virtually no moving parts.
Cabinet Enclosure Cooler - Frigid-X™ series are ideal for all NEMA 12 and NEMA 4 rated panels.
Cabinet Enclosure Cooler - Frigid-X™ - Advantages:
- Low in cost
- Compact
- No CFC's
- Fast installation
- Stabilize enclosure temperature and humidity
- Virtually maintenance free (No Moving Parts)
- Mounts in a standard electrical knockout
- Stops heat damage and nuisance tripping
- Eliminates fans and filters
- Prevents dirt contamination by keeping enclosure at positive pressure
- Units applicable to all environments including high temperature to 200ºF
|
|
|
Vortex Coolers from ITW Vortec keep electrical cabinets and control panels cool, clean and protected. An affordable, maintenance-free alternative to air conditioners, the easy-to-install Coolers have no moving parts to wear out. Vortex Coolers incorporate vortex tube technology that uses filtered compressed air to produce a refrigerated air stream distributed throughout the enclosure. Unlike fans that pull in hot, dirty air, the enclosure Coolers maintain a light positive pressure inside the cabinet to effectively seal out the surrounding contamination, heat and humidity that can wreak havoc on sensitive electronic controls. Refrigerated air produced by the vortex tube enters the cabinet while hot air is expelled through a relief valve. Models are available to deliver up to 5000 BTUH of refrigeration. The UL-listed enclosure cooler systems are thermostatically controlled and are available in NEMA 12, 4 and 4X rated models.
|
|
|
|
see the results for the following category : 
