Torque: 3 Nm - 256 Nm
Rotational speed: 250 rpm - 3,600 rpm
The AL series from Lovejoy is an aluminum jaw coupling which is highly durable, lightweight, and resistant to corrosion, oil, dirt, sand and grease. It features a fail-safe operation as it still continues ...
Torque: 10.2 Nm - 256 Nm
Rotational speed: 250 rpm
The SS Type Stainless Steel Jaw Coupling is the stainless steel version of the industry's model for shaft coupling. It operates without metal to metal connection, and is exchangeable with the AL and ...
Rotational speed: 1,750 rpm - 5,000 rpm
Lovejoy RRS/RRSC radially removable spacer - couplings have a simple elastomer installation without any hubs or realignment issues. The shaft is properly separated thanks to the center drop out. Both American and European ...
Torque: 15,000 Nm
Rotational speed: 19,000 rpm
Spider couplings also known as jaw couplings, are torsionally flexible shaft couplings which enable the connection of shafts or flanges via a polyurethane drive ring. Parallel, angular ...
... protects driver/driven equipment under stall condition. Our torsional couplings solve torsional vibration problems typical of those found in diesel engine applications. The torsional coupling dampens ...
Torque: 1 Nm - 7 Nm
Rotational speed: 0 rpm - 8,000 rpm
... an oldham-type coupling with a radial clamping hub, manufactured by Norelem. The unit is made out of spacer polyacetal, while the hub is made out of aluminum. It has a short assembly time, due to the ...
Torque: 52 Nm - 1,360 Nm
... lock washer. The thin walls of the clamping cones, combined with low hub pressures enables use with soft materials, such as aluminium and small hub diameters.
Torque: 5 Nm - 300 Nm
Torque: 0 Nm - 3,000 Nm
Rotational speed: 0 rpm - 14,000 rpm
Bellow coupling 'GSF' Hubs made in aluminum fully turned and bellow in stainless steel. Suitable for applications with high temperatures (> 300 °C). High torsional rigidity and low inertia. ...
Torque: 0 Nm - 9,600 Nm
Rotational speed: 0 rpm - 34,000 rpm
Backlash free jaw coupling «in steel» 'GAS/SG-ST' Made in steel fully turned with standard phosphating treatment. Several elastomer hardnesses available (page 27). High torsional ridigity. Electric insulation ...
This flexible shaft coupling has a monolith body construction that allows precision information transmission in both directions of motion without loss making it backlash free. It is made form aluminum ...
ENGRENAGES HPC completes its wide range of transmission couplings by adding two new models that offer great value for their price, these are a domed coupling and an elastic aluminium ...
Torque: 20 Nm - 1,600 Nm
... customized length up to 3 m • plug in, backlash free, oszillation dampening • split- hub on both sides • stainless design (aluminum) • Torque range: 20 - 1600 Nm • Shaft diameter: 10 - 100 mm • temperature range: ...
Torque: 8 Nm - 2,000 Nm
• radial clamping hub on both sides • cost-effective, very short design, standard series • plug in, backlash free, oscillation dampening • Torque range: 8 - 2.000 Nm • Shaft diameter: 8 - 90 mm
Torque: 15 Nm - 2,000 Nm
• simple installation due to split-hub design • can be combined with EKM - hub or ESM-A - hub • mountable without disassembly of motor • Torque range: 15 - 2.000 Nm • Shaft diameter: 8 - 100 mm
Rotational speed: 0 rpm - 28,000 rpm
coupling without backlash Backlash-free couplings under initial load axial plug-in easy mounting no time-consuming screw connections compact design low rotating inertia maintenance-free 3-part ...
Torque: 0 Nm - 0.8 Nm
Rotational speed: 0 rpm - 10,000 rpm
The cross-slotted coupling is a very inexpensive shaft coupling manufactured using injection technology. Backlash-free, angularly aligned transmission of rotary movements, medium torsional stiffness, ...
Torque: 0 Nm - 3.5 Nm
Rotational speed: 0 rpm - 3,000 rpm
Unique multi-purpose coupling for lighter applications, with large angular and radial compensation properties. A special feature of this coupling is the resistance to axial movements. This makes it suitable ...
Torque: 7.5 Nm - 3,600 Nm
Rotational speed: 2,800 rpm - 19,000 rpm
Features 1. Torsionally flexible, maintenance free. 2 Ali over machining good dynamic properties. 3.Compact design
Torque: 21 Nm - 327 Nm
Rotational speed: 100, 1,500, 3,000 rpm
... maintenance. 2.Only Screw Driver is required to dismantle coupling for Maintenance / Inspection. 3.Down Time is very low. 4.Having 2 Snap-wrap Elastomers means double flexibility. 5.Floating Aluminum ...
Torque: 11 Nm - 2,250 Nm
Torque: 23 Nm - 2,454 Nm
Rotational speed: 3,550 rpm - 19,000 rpm
Torque: 0.02 Nm - 0.6 Nm
Rotational speed: 8,000 rpm
Material Aluminium/Chromised Popular Bore Combinations For all popular bore combinations d 1 & d2 alternatives please see back of catalogue.
Torque: 0.62 Nm - 7.68 Nm
Rotational speed: 0 rpm - 6,000 rpm
Extra flexible with low bearing loads Aluminum for low inertia Multiple beam cuts improve parallel misalignment capabilities Zero-backlash Bore tolerance: +.025mm/–.000mm Maximum speed: 6,000 RPM Temperature range: ...
Torque: 0.9 Nm - 64.6 Nm
Rotational speed: 8,000 rpm
Ruland Manufacturing offers a full line of curved jaw couplings with bore sizes ranging from 1/8" to 1-1/8" in the inch series and from 3mm to 30mm in the metric series. Jaw couplings consist of two ...
Torque: 75 Nm - 600 Nm
... wear-resistant over the long-term The robot couplings VERO-S NSR 160 and NSR mini 100 are now more wear-resistant than ever. Imprecise positioning of the robots means that the contact points for pallet coupling ...
Torque: 2.5 Nm - 120 Nm
Rotational speed: 10,000, 9,000, 7,000, 4,000 rpm
Coupling flexible, compact, for reduced mounting nesting couples. Flexible element: Natural rubber block bonded to. V-shaped metal armatures. Flange: aluminium or cast-iron: DRIVE-SEGMENTFlexible ...
Torque: 2 Nm - 10 Nm
Rotational speed: 5,000 rpm
Metal Bellow Couplings MBK features aluminum hubs and a stainless steel bellow. Working with a high torsional stiffness, the machine has a zero backlash. It is built for dynamic placement and servo systems, ...
Torque: 0 Nm - 3 Nm
BKL MINIATURE COUPLING WITH CLAMPING HUB UP TO 3NM Design: With a single radial clamping screw per hub ISO 4762. Temperature range: -40° C to +200° C (-40° F to +392° F) Backlash: Absolutely backlash-free. ...
Torque: 0.035 Nm - 50.84 Nm
Beam Couplings are a class of coupling called Information Transmitting Couplings - These zero backlash, high torsional rigidity couplings are for precision positioning ...
Torque: 0.4 Nm - 0.6 Nm
Rotational speed: 12,000 rpm
Integral clamp with alloy steel (blackened) socket head screw. Hubs anodised aluminium alloy. Polyamide 6.6 fibreglass reinforced membrane disc. Bore diameter tolerance H8.
Torque: 932,126 Nm
Rotational speed: 10,000 rpm
... connecting shafts with close proximity to one another. The most popular T10 design features a two piece, horizontally split, cast aluminum cover that provides for easy installation and servicing.
Rotational speed: 0 rpm - 10,000 rpm
... alignment during assembly operations. Its your ticket to greater system accuracy and reliability. Available only in 7075-T6 aluminum.
Torque: 1 Nm - 22 Nm
The aluminium beam coupling with clamp fixing is manufactured by Bervina, and has a parallel design with 3D misalignment which has an angular precision in rotating systems. It also has a high torsion ...
Torque: 0.6 Nm - 280 Nm
Rotational speed: 6,400 rpm - 42,000 rpm
This is a single disk type flexible coupling. High-torque specification with rated torque 1.5 times higher than conventional products. This is the most appropriate for a servomotor with the instantaneous max. torque of ...
Torque: 15 Nm - 4,800 Nm
Rotational speed: 3,300 rpm - 22,200 rpm
The standard jaw type couplings transmit the torque form-fi t andcompensate little axially and angular dislocations.