|
|
|
|
|
|
Unimotor fm
055 to 250 Frames
0.72 Nm to 136 Nm(408 Nm Peak)
Unimotor fm
Unimotor fm is a high performance brushless AC servo motor range matched for use with Control Techniques drives. ‘fm’ stands for flexible motor, designed to accommodate a wide range of applications. The motors are available is seven frame sizes with various mounting arrangements and motor lengths.
Reliability and innovation
Unimotor fm is designed using a proven development process that prioritises innovation and reliability. This process has resulted in Control Techniques’ market leading reputation for both performance and quality.
Matched motor and drive combinations
Control Techniques motors and drives are designed to function as an optimised system. Unimotor fm is the perfect partner for Unidrive SP, Digitax ST and Epsilon EP drives.
Features
Unimotor fm is suitable for a wide range of industrial applications, due to its extensive range of features:
Torque range: from 0.72 Nm to 136 Nm
Standard and high energy parking brakes
Numerous connector variants, e.g. vertical, 90° low profile, 90° rotatable and hybrid box on frame size 250
Variety of flange possibilities (IEC/NEMA)
Various shaft diameters; keyed or plain
IP65 conformance; sealed against water spray and dust when mounted and connected
Low inertia for high dynamic performance; high inertia option available
World class performance
Supported by rigorous testing for performance and reliability
Optional high peak torque motors; up to 5 times stall torque
Winding voltages of 400V and 220V
Rated speeds include 1500 rpm, 2000 rpm, 3000 rpm, 4000 rpm, 6000 rpm and others available
|
|
The Dunkermotoren BG range of brushless, direct current motors (EC motors) are notable for:
Very long life
High efficiency
Highly dynamic acceleration
Good regulation characteristics
Wide speed range
High power density
Maintenance-free
Robust design
Integral Hall sensors for rotor position
Low moment of inertia
High degree of protection
Winding insulation - Class E or B
Neodymium magnets
These electronically-commutated DC motors can be combined with control electronics, gearboxes, and encoders in a modular system to provide a flexible, adaptable, market-oriented solution.
|
|
No cogging or preferred rotor position
No iron losses
Extremely low current consumption
Low audible and electrical noise
Extremely light and compact
Smooth and accurate speed, position, and torque control
Low vibration
Speeds up to 100,000 rpm
Electronic commutation for extremely long operational lifetime
High precision gearboxes available in all sizes
Feedback components available in all sizes
Control electronics available for all motor series
Custom systems available from design to production
|
|
No cogging or preferred rotor position
No iron losses
Extremely low current consumption
Low audible and electrical noise
Extremely light and compact
Smooth and accurate speed, position, and torque control
Low vibration
Speeds up to 100,000 rpm
Electronic commutation for extremely long operational lifetime
High precision gearboxes available in all sizes
Feedback components available in all sizes
Control electronics available for all motor series
Custom systems available from design to production
|
|
Diameter: Ø4 to 12
Voltage : DC 5V to 12 v
Any Encoder are available.
Spur or Planetary gear box are available.
Controller for Ø12 is available
Application
-Robot
-Medical pump
-Chip mounter
|
|
For nearly two decades, the name Moog has been synonymous with high performance brushless servomotors and servodrives offering the highest dynamic performance, power density and reliability. We are committed to offering a full range of products as well as custom solutions and systems expertise. Other electric products offered include electro-mechanical actuators and accessories.
Moog's brushless servomotors and servodrives are rugged for long service life and when you need repairs, ask for Moog Authentic Repair Services.
|
|
4-pole sinusoidal brushless motor, in enclosed form.
- Rotor with NdFeB magnets.
- Safety circuit breaker.
- Winding class F according to VDE0530.
- IP65 insulation according to CEI EN 60529 standards.
-Feedback with resolver 2 poles.
On request it is possible to mount a 24 VDC NC brake with permanent magnets, identified by the letter K (BSK).
|
|
SUPERSAX ®
Complete line of sinusoidal brushless servomotors. Torque ranges from 0.35 up to 30 Nm.
With a fashionable design and a torque range from 0.35 to 30 Nm the SUPER SAX® (6 poles) are an excellent solution for the most demanding needs of industrial automation, where very high performance axis control is required. Specially designed for use with AXOR’s brushless servodrives, all types (MAGNUM 400®, MINI MAGNUM® and Micro B® line).
|
|
The SE600 series brushless motors from Trust Automation are stocked at our factory for quick delivery on orders of five or less units. Our low inertia AC motors new design reduces the overall package size, delivering higher torque than older models. They are designed to meet the demands and requirements of high performance motion control applications.
The SE600 motor line includes standard US 2000 line encoders with differential encoder signals, (A, B, Index), and Hall Sensors with standard Hall signals, (U, V, W). They have very low torque ripple, at 0.3 % of rated torque. All models are oil sealed and have brake and tachometer (110W and larger) options.
|
|
The SE700 series brushless motors from Trust Automation are stocked at our factory for quick delivery on orders of five or less units. The modern design of this medium inertia AC motor reduces the overall size of the motor, delivering significantly higher torque than older models. They are designed to meet the demands and requirements of high performance motion control applications.
The SE700 motor line includes standard US 1000 line encoders with differential encoder signals, (A, B, Index), and Hall Sensors with standard Hall signals, (U, V, W). They have very low torque ripple, at 0.3 % of rated torque. All models are oil sealed and have brake and tachometer (110W and larger) options.
|
|
The new series of servo motors SM2A with integrated motor can be easily programmed through EVER's windows PC based user friendly development environment called ATOMIC.
The SM2A series are constructed with a high protection degree of IP65 and are equipped with reliable connectors. Other features are: AC power supply, fieldbus CANbus or serial RS232/485, optoisolated inputs and outputs, an encoder for the closed loop control of torque, velocity and position (optional), The motor section is made of magnetic Low Loss material and has a holding torque from 3,4 to 12,5 Nm.
|
|
The Gefran-Siei ARTDrive S - XVy series of servo drives offers the most advanced technology for drives used in Motion Control applications.
Integrated state-of-the-art functions and the availability of a wide range of ratings for brushless and asynchronous motors make these ideal for use with the most modern industrial servo systems. Moreover, the integration in the drive of dedicated application software programs allows for unique customisations, to suit specific controls of complex machinery.
|
|
Servo Motors
AC Brushless Servo Motors
Use our Servo Motor Virtual Ship program and have your Servo Motor order shipped within 5 days ARO!
- MDM-5000 Brushless Servo Motor
- Stainless Steel Brushless Servo Motor
- Food Grade Brushless Servo Motor
- N-Series Servo Motors
- H-Series Servo Motors
|
|
|
Kollmorgen's brushless servomotors are designed to operate over a broad range of speeds and have the advantage of reduced maintenance since there are no brushes or commutators. DC brushless motors offer superior performance with our highest torque/inertia ratio and high speed capability of up to 20,000 rpm for typical designs (up to 70,000 rpm for special designs). Our linear brushless motors can exceed 10 m/s.
|
|
|
|
|
|
Servo Dynamics IB Servomotor provides applications with low inertia to attain the highest acceleration capability – to allow you to position faster. The IB series is used in the world's fastest machines and demanding applications. IB Servomotor provides low inertia and high torque desired for excellent performance response, and is a rugged, durable design, they have heavy duty continuous operation for dependability and assurance that it will always perform, and high acceleration capability to move faster, and high torque to inertia ratio enables the machine to produce more parts per hour. And winding potted for high voltage protection and for improved reliability and improved heat transfer.
The IB brushless servomotors provide a very responsive acceleration in a rugged, durable design with high energy Neodymium-Iron-Boron magnetics. This series provides continuous stall torque capability ranging from 3.9 Lb-In (0.45 N-m) to 117 Lb-In (13.3 N-m). Peak torque capability is nominally 4 times continuous. This series has the lowest inertia to provide the maximum torque per package size.
|
|
|
|
|
|
All of Teknic's motors are brushless AC servo motors with integrated encoders. Neodymium-Iron-Boron magnetic material is used to attain high power density while maintaining a low cost per watt. These high power density motors help increase throughput even when available space for the motor is constrained. The magnetic design of the motors includes skewed stators and/or rotors for minimum cogging torque and low torque ripple.
Since the motors are brushless, the only parts in mechanical contact are the shaft bearings. The bearings are oversized, single row, deep groove radial bearings with non-contact lubrication seals. The large ball bearings have diameter variations of less than 15 millionths of an inch, and the steel used is vacuum-degassed and heat-treated for maximum endurance. Thus, these motors are exceptionally reliable.
Teknic offers brushless servo motors in two lines: Instrument grade and Industrial grade. Instrument grade motors are value-engineered, high-torque motors intended for typical lab environments or where the motors will be reasonably protected from harsh environments. Industrial-grade models are robust, sealed motors perfect for harsh environments.
|
|
Rated torques from 0.5...4.3 Nm in three sizes
Compatible with planetary gears
Designs with parking brake
Samarium-cobalt magnet systems
Motor shaft with key
|
|
FS synchronous servomotors (FSA and FSP series) are small brushless AC with permanent magnets. They are ideal for any application requiring great positioning accuracy. These motors are exclusively servo driven by Innova series drives MCSi and MCPi.
General characteristics:
* Highly reliable uniform output torque and low maintenance.
* Mounting flange of 40, 60, 80 and 120 mm square.
* Rated torque of: 0.32 - 0.64 - 1.27 - 2.39 Nm.
* Maximum speed of 5,000 rpm.
* Incremental or absolute encoder.
|
|
BGK-Economy-Servo motors with
integrated digital AC-servo regulator DIS 48/15
The low-cost system makes the use for modern drive technology possible at small prices even in ranges, where we thought until now, that a use of servo systems is from cost reasons not conceivable.
The decentralized structure of the system makes the installation very easy.
- no complex wirings
- no expensive motor leads
- conceivablly simple Plug & Play.
|
|
|
|
|
|
M-Series Servo Motors
ORMEC’s M-series AC brushless servo motors provide high torque-to-inertia ratios and excellent continuous torque and peak torque performance in a compact design. These industrial quality servo motors incorporate high performance neodymium permanent magnets and a highly efficient stator winding design which results in excellent power density while maintaining low cogging characteristics.
Key Features
* Continuous Stall Torques from 1.4 to 248 in-lb (0.16 to 28 N-m)
* High Peak Torques from 4.4 to 557 in-lb (0.5 to 63 N-m)
* Output Power from 50 to 4,400 Watts (0.07 to 5.9 HP)
* High Maximum Speeds from 3,000 to 5,000 RPM
* Incremental Encoder resolutions up to 24,000 counts per revolution
* Optional Absolute Encoders feature multi-rev operation up to 1,048,576 cts/rev
* Class F Insulation over Class B temperature rise provides additional thermal headroom
* Minimum Torque Ripple & Cogging for smooth low-speed performance
* Totally Enclosed Non-Ventilated (TENV) standard IP-65 except shaft opening
* Optional Fail-Safe holding brakes
The M-series servo motors also completely eliminate brush wear maintenance problems, and feature extremely durable construction which includes heavy duty bearings. Rugged MS connectors provide reliable interconnections to both motor and optical encoder.
|
|
Series FXM:
This synchronous motor series with permanent magnets offers unmatched dynamic characteristics, sturdiness and great acceleration capability.
Velocity feedback is obtained through an encoder.
They may also have an optional brake and/or shaft with keyway.
|
|
# Peripheral operation, minimized installation needs
# Versions for operation at 24VDC and 48VDC
# Compact and powerful design
# Versions with CANopen interface acc. to CiA DSP 402 V2.0
# Versions with incremental output 1024/rev. RS422 A-,B-,Z-signal
# Dynamic speed control and positioning
# To combine with planetary gear GPK45/55 (1-, 2-stages; up to i=49:1)
# Parking brake available
# High protection class IP54 (IP65 as an option)
# Maintenance free and robust
# Customer specific design
|
|
DC Brush Servo Motors
DC Brush Servo Motor Platform 2100
- 2105 Servomotor
- 2110 Servomotor
- 2115 Servomotor
- 2120 Servomotor
- 2130 Servomotor
DC Brush Servo Motor Platform 2600
- 2605 Servomotor
- 2610 Servomotor
- 2615 Servomotor
- 2620 Servomotor
- 2630 Servomotor
- 2640 Servomotor
DC Brush Servo Motor Platform 3500
- 3505 Servomotor
- 3509 Servomotor
- 3515 Servomotor
- 3528 Servomotor
DC Brush Servo Motor Platform 4100
- 4101 Servomotor
- 4102 Servomotor
- 4104 Servomotor
- 4106 Servomotor
DC Brush Servo Motor Platform 40TT
- Drop in replacement for the discontinued Kollmorgen* TT Servo Motors
- Matched Windings, Connections, and Mechanical Interface
- Heavy Duty Steel Housing for Demanding Service
- Full Performance Testing Included
- Resonably Priced, Excellent Value
- Reliable Operation in Sever Service
|
|
Danaher's family of DC motors offers an extremely wide variety of size and package types. From frameless pancake motors to high acceleration housed/shafted motors, Danaher offers the most complete range of high performance motors available today.
Pacific Scientific PMDC motors offer rugged, quality construction providing dependable operation. A well deserved reputation for value, these motors are backed by a two-year warranty.
Kollmorgen ServoDisc™ Brush Motors differ from conventional DC servomotors in their unique slotless disc armature design. This enables them to deliver a concentrated level of performance, in both incremental motion and continuous speed that is not attainable with conventional ironcore motor designs.
Direct Drive DC Torque Motors are particularly suited for servo system applications where it is desirable to minimize size, weight, power and response time, and to maximize rate and position accuracies.
|
|
DC1500:
Brushless direct current motor in compact design for flange mounting with integrated incremental encoder
- Pnom = 400W;
- Mmax = 3 Nm;
- Nmax = 9000 rev/min
DC1550:
Brushless direct current motor in compact design for flange mounting with integrated incremental encoder
- Pnom = 600W;
- Mmax = 8 Nm;
- Nmax = 5000 rev/min
|
|
DC-motors
* Good efficiencies, high peak load through the use of premium ferrite materials and optimized magnet systems
* High-quality design
Steel tube housing, externally accessible brushes
* Versatile compatibility
Well-graduated gear series, parking brakes, tachometers and incremental encoders
|
|
Custom windings are available on select SmartMotors. These special windings allow SmartMotors to achieve higher speeds or greater torque.
Custom shaft lengths and diameters are available on select SmartMotors. Flats and keyways are common options found on motor shafts. SmartMotors can be purchased with various versions of these shaft modifications.
Torque vs. Speed curve data is derived under dynamometer testing using a power/battery supply at an ambient temperature of 27°C (80.6°F).
Connector kits and cable options are available.
SmartMotor servos have CE certification.
|
|
|
|
|
|
Integral, high torque density servo drive with Canopen interface and absolute multiturn positioning.
Universal 350 and 550 Vdc bus supply
2.5-9 Nm torque, 5000 rpm max
Multi axes machines
Direct drive without gearbox
Intrinsic multiple electric gear
Built in single turn and multi turn 4096 turn + 16 bit absolute encoder, 1 arcmin accuracy
No zeroing cycles
CanOpen DS301, DSP402v2.0 compatible
Double insulation
Built in RFI filter, Class B
IP 68 protection
The new TorqueWire series of integral servo systems creates a different approach to complex automatic machinery architecture. Torquewire motors are complete, self sufficient servo axis building blocks which allow the design, integration and operation of large multi axis systems with minimum hardware and surprising ease.
The TorqueWire motor systems consist of an advanced, high performance rare earth brushless servo motor, a DSP based, high voltage interpolating servo drive and a single or multi turn absolute encoder, all assembled in a very compact IP 68 protected frame.
|
|
PANdrive PD-163-42
Description
42mm BLDC motor with integrated controller/driver
The PD-163-42 is a full mechatronic solution including a 42mm brushless DC motor (NEMA17). It combines a convenient BLDC controller/driver electronic (TMCM-163-42) with a range of different motor types with internal HALL sensors. The PD-163-42 offers two motor torque options and can be controlled via RS232 or RS485 interface. The power supply is connected via flat connectors and the interface and the multi-purpose I/Os can be connected via high density JST connectors. It integrates a position regulator and a ramp generator. The integrated ramp generator provides for parameterized smooth positioning and supports an external switch as an absolute position reference.
|
|
|
|
|
|
The IG series DC brushless three-phase servomotor delivers high continuous torque in a cost reduced package.
The increased torque is the result of eight magnetic poles on the rotor compared to the traditional four magnetic poles. This design uses neodymium magnets for maximum performance. The IG series has an open-lamination design reducing cost. This series come with NEMA standard flanges size 17, 23, 34, and 42 with continuous torque rating from 25 to 820 oz-in (0.18 to 5.80 Nm).
An optical encoder having A, B and C encoder tracks and uvw commutation tracks comes standard with the servomotor. Encoder resolutions available are 500, 1000, 2000, 2048, 4096, and 8192 ppr (pulse per revolution).
The servomotor is designed with a 40 in (101.6 cm) shielded/grounded power and encoder cable extending from the rear of the servomotor for fitting into those tight locations.
Both IP 40 and IP 65 are available for the environmental rating. All models are available with gear heads.
The motors are available with and without a build-in holding brake. The motor length and specifications would vary if a servomotor with a brake is chosen.
|
|
|
|
