ATLAN C-8 is an SPD prepared for 8 line protection, 4 pairs protected per
line. This is done with a Printed Circuit Board with RJ45 input/output
connectors.
With ...
ATLAN 24/16/8 is an SPD prepared for 24, 16 and 8 lines of protection with
four pairs protected per line. This is done with a Printed Circuit Board with
RJ45 input/output connectors.
With ...
ATLAN 12/8/4 is an SPD prepared for 12, 8 and 4 lines of protection with four
pairs protected per line. This is done with a Printed Circuit Board with RJ45
input and already crimped output ...
leste cnc
Powerful, Universal, User-friendly...
The CNC controls of the Leste series ...
FW PCsupervised is a universal CNC Firmware.
Although ...
Designed for applications in computer centres and server rooms
Models in the GEA Denco T-Range are available in 5 versions, for cooling capacities between 5 and 136 kW. They are also provided with the environmentally friendly R410A refrigerant.
Features of the GEA Denco T-Range.
The direct-expansion systems from the GEA Denco T-Range are compact and are available ...
Designed for small rooms and retrofits
Units in the GEA Denco MS-Range are available in 2 versions, for cooling capacity between 5 and 14 kW.
The GEA Denco MS-Range ...
Compact CNC controllers:
The compact CNC controllers 903 and 905 represent an economical solution for simpler applications with one channel and up to 8 axes. The cost-efficient controller is suitable for automation devices, ...
1. Resistance range from 1.00000 Ω to 1.200000 MΩ
2. Error tolerance 0.003 %
3. Temperature coefficient < 1 ppm/K
4. Simulation of RTD (Pt, Ni), Error tolerance 0.02 °C
5. RS232 (IEEE488 optional) ...
TNR-RJ45 series signal devices with multi-interface is designed according to IEC standard, the interface form is standard RJ 45 crystal joint, it can protect several pairs special communication circuits, it is applicable for ...
Main Applications
- Point of Sale
- Retail
- Hospitality
- Airlines
- Postal Services
- Car Rentals
Features
- PC/SC and EMV 2000 Compatible Smart Card Reader Ensures Universal Application Support
- Top Insertion Smart Card Reader Enables Card to Stay in Plain View of the User
- Supports Maximum Smart ...
The Delta Tau PMAC NC controllers incorporate the power of our controllers into an industrial package. The package is designed as a retrofit to an existing ...
PowerStation™ Ultima
Five Test Stations in One
Controls up to FIVE single fuel cells or stacks independently and simultaneously
Simultaneous ...
With the VISION™ 51, we are offering the right CNC control for smaller gantry cutting machines. Even in ...
Fagor Automation offers the widest and most complete range of products and provides a
complete solution for governing all kinds of machine tools from the simplest to the
state-of-the-art.
Fagor ...
For a CNC plasma cutting machine to be efficent, it must be easy to use. Our new control system makes running the machine as easy as clicking the mouse or touching the screen - even a first time computer user can be cutting parts ...
Fideris Brand force controler utilizes closed loop PID controller with pneumatic output and feedback provided by transducer. Available with or without ...
KEL-VARIA with GRINDplusIT CNC Control System Hydrostatic guides in the X- and Z-axes, combined with strict ...
Compact, ergonomic packaging
All 4 Pairs Protected
< 100 MHz, Cat. 5 Capable
Termination: RJ45, Cat. 5 connectors

The LZ-NET series ...
Computer Generated Holograms (CGH)
Computer Generated Holograms (CGH) that convert the wavefront of the test specimen to an aspherical wavefront extend the testing options for traditional Fizeau interferometers for complex surfaces. In the measurement ...
Using a combination of graphics and text the operator is taken through set up routines, grinding cycles and wheel form and dress procedures assisted by prompts at each stage. Also included are optimum suggested default values for certain parameters, that the operator ...
Innov@ Close Control Units
The new series of INNOV@ H Close Control Air Conditioning units are designed to guarantee and respect all environment protection parameters; they represent the perfect answer to all technical requirements of different technological plant concepts (control rooms, EDP rooms, textile industry, metrological rooms, etc ...).
The exclusive design ...
Hot-Swap
Maxim offers the widest range of solutions for +1V to +80V and -9V to -100V voltage rails for networks, servers, and storage and telecom systems. Our ...
With OpenCNC® or WinMotion® open- architecture software loaded on a compact, rugged platform, MDSI's new FlashCNC and FlashMotion solutions ...
The DS-3000 Series puts all the advanced functions required of a signal processing system in a single, compact paper ...
Numerical Controls
S4000 CNC | S3000 CNC | OPTIONS
Selca's Numerical Controls are ideal for milling,
high-speed finishing ...
The performance of a modern machine tool depends not only on a well-designed machine construction but also to a large degree on the CNC control. TRAUB already realized this early on, which is why they have been developing their own control concepts with integrated PC, thus setting new standards. Therefore ...
Techno work
Optimization of the computer rooms
Optimization ...
The control is a high-performance, PC-based control system with integrated SPS.
Operation is accomplished from a separate operator terminal via keyboard and mouse. In addition to the hardware components of the PC-system the ICOS QUICK STEP is ...
CNC-EB600L(S.F)
Built-in 32 bit IPC ensures optimum situational stability during machining.
Chinese & English display.
Metric & British unit displays and programming provided.
1,000 ...
FILAMENT WINDING MACHINES FOR PROTOTYPING AND PRODUCT DEVELOPMENT
Laboratory series filament winding machines is special designed advanced equipment for using in the research and development ...
Omtronix DNC (Direct Numerical Control) provides fault tolerant, reliable communication with NC/CNC machines.
PC based Software, Windows NT, 2000 Pro, XP Pro compatible
Plug-and- play support makes ...
The A1200 PC windows based NC control system for metrology applications includes WINAMC a fully flexible operator ...
The SCITEQ-2000 is a system built up of modular components which all fit into a standard rack. This unique approach allows a system to
be expanded ...
