|
|
These drum pumps are portable and are particularly suitable for the transfer of fluid from drums, even with corrosive fluids. This pump, immersed in the fluid, does not use internal mechanical seals (subject to high wear), and its construction guarantees that any leakage of the fluid, even accidental, is collected in the tank. The TR pump is available with an electric or a pneumatic motor that are perfectly interchangeable. Its open rotor allows continuous flow pumping of clean corrosive fluids with an apparent viscosity of up to 600 cps with a 500-watt motor ( 20°C) and up to 900cps with an 800-watt motor (at 20°C).
Description:
The drum pumps are composed of a suction hose on the end of which is housed the open rotor fixed to the pull shaft connected to the pump by a convenient ring nut, whilst the transmission is carried out using a transmission joint.
|
|
|
|
|
|
Two-Way Air Operated Drum Pump for Fast Cleanout of Sumps and Parts Washers Vortec has introduced the new Dual-Force Vac - a powerful yet economical two-way air operated drum pump. Its all-new, patent pending design offers many unique features. The quiet and safe operation of this air-powered drum pump means no motor burn out and no shock hazard. This high quality, dual mode drum pump is priced at or below other's vacuum-only models.
Air Operated Drum Pump Applications:
Using filtered compressed air, the heart of the Dual-Force Vac is Vortec’s Transvector air amplifier, which moves a large volume of air using a lesser amount of compressed air. Electric driven vacuums frequently experience motor burnout from handling liquids. The Dual-Force Vac offers both safe and powerful vacuuming of fluids, as well as instant pump out capability.
The Dual-Force Vac is truly a versatile, plant maintenance tool for fast cleaning and pump in/pump out handling of:
- Coolant sumps, even with chips and swarf
- Tramp oil
- Sludge and waste water from parts washers
- Hydraulic oil
- Solvents
- Liquid spills
- And much more
|
|
The Reversible Drum Storm is a maintenance free system used to suck up Liquid Spills, waste water, tramp oil, coolant, sludge, chips, hydraulic oil, and other liquids all powered by just compressed air.
Its high powered vacuum fills the drum in less than two minutes. With a simple turn of the knob, the same stainless steel pump quickly empties the drum. The flow rate in and out of the drum can be controlled with the knob itself.
ADVANTAGES - REVERSIBLE DRUM STORM VACUUM)
- Beats shop vacuums on reliability, performance, and price.
- Has an automatic float valve to prevent overfilling.
- Safe in wet areas requiring no electricity.
- Eliminated double handling of toxic material and emptying vac canister.
- Eliminates need for "floor dry" absorbent
SPECIFICATIONS
- Stainless steel is the material of construction.
- Consumes just 19 SCFM @ 80 PSIG.
- Compact in size (10.5" Long x 2.75" Wide)
|
|
|
The safety devices of the CARBUSET AP 40 L electric pumps are supplemented by a built-in anti-siphoning system that, in case of accidental damage to the delivery tube or fuelling gun, ensures that the liquid contained in the drum does not leak out due into the surrounding environment to a siphon effect.
|
|
DOPAG drum pumps have proved themselves to be particularly useful as central material supply systems as well as being able to supply single stations.
They feed viscous materials such as grease, adhesives and sealants or the base components of silicone, polyurethane and epoxy resin directly from original containers.
|
|
HIGHLIGHTS :
·complete range of mobile or static drum drainer pumps for very fluid to very viscous products, from manual hydraulic pumps to very sophisticated metering systems.
·adaptation of the CM tec positive-displacement technology to each of our drum drainers
ADVANTAGES :
· static or mobile unit
· designed to give value for money, even on the spares
· robust product designed for intensive use
· filling option with ultra-precise metering system
· two-year warranty
· steady discharge
· self-priming
· tailored to clients' needs, developed with their design offices
|
|
|
The easiest, most reliable and economical way to transfer or sample liquids from drums, vats and carboys. Jabsco's container emptying pumps offer many options of tube materials which can handle a wide range of liquids found in chemical, metal-finishing, food and general manufacturing industries. The heavy-duty tubes are driven by either an electric motor featuring the latest cut-out switch or a compressed-air motor for areas where electricity is unavailable or would be unsafe.
|
|
This drum drainer system for fully opening drum is used to transfer high viscosity products, even those with no flow capacity such as grease, lubricants, glues, silicones, inks or similar products.
This is a hybrid system, pneumatic for the descent of the follower plate, guaranteeing constant feeding of the pump, and electric for the positive displacement CM tec-technology pump to facilitate the transferring of large quantities.
The volumetric pumps that equip this system have a capacity of up to 90 L/min and 10 bars of pressure.
Product Features
Drum drainer pump :
§ CMtec technology with monoblok blades and a curved stator.
§ Hybrid system : pneumatic frame with a follower plate and a volumetric pump.
§ Optional : metering system and a trigger gun.
-Designed for an intensiv use
-Excellent quality/price relation
PERFECT FOR THE PUMPING OF VERY HIGH VISCOSITY PRODUCTS
Such as :
- grease
- glues
- lubricants
-products containing additives
-silicones
-inks
|
|
These pumps vacuum-barrels light and handy are specialized for the transfer of fluids of low viscosity, neutrals or corrodents. In fixed telephones or mobiles, they constitute the ideal solution for all the intermittent uses. All your transfer operations are ensured of an irreproachable effectiveness and a safety due to a technique without fault and of a great simplicity. The modular concept allows strict interchangeability between plunger and driving tubes. In option, an electronic variable speed transmission enables you to adjust the flow with your needs.
Various models are available of which a specific model for zone ATEX 100, tight with projections, IP 54.
Various accessories: gun, flowmeter, strainer, adapter of barrel... etc
Flow up to 200 L/min
Tube plunger in PP, PVDF, stainless 316Ti, Aluminum
Head of discharge up to 28 m
Viscosity max: 1000 CP
Mono or three-phase engine
|
|
|
Finish Thompson powered, portable drum pumps are designed to provide safe and easy transfer of a wide range of fluids including difficult to handle liquids such as acids, bases and solvents. Containers are quickly filled or emptied without spills or splashes. Many different models and pump tube lengths are available to satisfy diverse customer requirements.
|
|
JESSBERGER offers a complete range of electric and pneumatic driven drum and container pumps for many applications. Pumps can be used for nearly all media up to a viscosity of 1.000 mPas - whether neutral or aggressive, whether flammable or not flammable, whether thin or lightly viscous.
Pump tubes are made of Polypropylene, PVDF, Aluminium or Stainless Steel. The drum pumps can be delivered in 700, 1000, 1200, 1500 and 1800 mm.
Special pump tube lengths are available from 200 - 3000 mm.
The products of this manufacturer have a very good cost/ performance ratio. The pumps have standed the test of time since many years in nearly all industries worldwide.
|
|
|
|
|
|
In all cases where corrosive liquids, such
as acids and lyes, but also neutral liquids, have to be removed from drums, tanks, and other containers, we can offer you a suitable solution with our modular pump tubes and motor systems.
As part of these systems, pump materials suitable for almost any liquid can be selected, which combine excellent chemical resistance and exceptional material quality.
The free selection of the type of drive enables an economical work with ideal delivery results. Suitable accessories, such as nozzles, emission proof drum adapters, flow meters, and hoses, complement these pumps to a safe transfer system.
Also available as ready-to-use, pre-assembled pump sets fitted with ideally matched components.
- For corrosive liquids, such as acids and lyes
- Robust, rigid design for industrial use
- Powerful and convenient
- Optionally with Universal-, Three-phase- or
compressed air motor
- Pumptube made of PP, PVDF, Aluminium, Stainless
Steel or Hasteloy C
- Mechanical sealed or sealless construction
- Special lengths up to 2500mm available
|
|
HIGH POWER DRUM PUMPS - For safe & fast transfer of chemicals, solvents, corrosive liquids in hazardous or non-hazardous environments.
* Sealless
* Empties 55 gallon drums in less than 2 minutes
* Self priming
* High power double insulated 1150 watt motor
* Easy maintenance, field repairable
* One piece tube insures safe, leakproof operation
* Choice of Polypropylene, Kynar®, or Stainless Steel pump tubes
|
|
Blackmer sliding vane hand pumps provide a safe, convenient method of dispensing or transferring non-corrosive liquids from drums, barrels, tanks or vats. They are designed for easy, efficient operation in handling a wide range of liquids in industrial, construction and agricultural applications.
Operating on the same principle as Blackmer power pumps, these positive displacement, self-priming, sliding-vane pumps provide steady, non-pulsating flow at easy turning speeds. The sliding vanes self-compensate for wear to maintain high-suction lift and are easily replaced at low cost after years of service.
|
|
Submersible Drum Pumps (MarFlow)
if your task is to remove chemicals from drums, barrels or totes
|
|
A steady rise of fuel prices, rapeseed oil becomes more and more popular as reasonably priced alternative for fossil fuel. The number of users in agriculture farms and in the freight forwarding business is steadily growing. This development poses a new challenge for both, the pump technique and the company Lutz-Pumpen. Lutz offers different pump solutions which are tailored to the specific demands for the transfer of vegetable oils. A flow meter for the precise measurement of the filled liquid amounts is also available.
- Ideally suited for pumping rape oil, vegetable oil and bio diesel
- Quick and controlled refilling of the vehicle
- Materials adapted to the respective medium ensure a long service life
- Optional with flow meter for precise measurement of the filled liquid amount
|
|
The explosion-proof models of Lutz drum pumps provide optimum protection when handling easily inflammable, combustable material and when working in potentially explosive environments. They comply with all the international standards ans provisions as well as with the directives according to Atex 100a (category 1 / 2)
The free selection of the type of drive enables an economical work with ideal delivery results. Suitable accessories, such as nozzles, emission proof drum adapters, flow meters, and hoses, complement these pumps to a safe transfer system.
- For easily inflammable, combustable liquids
- Robust, rigid design for industrial use
- Powerful and convenient
- Optionally with Universal-, Three-phase- or
compressed air motor
- Pumptube made Stainless Steel or Hasteloy C
- Mechanical sealed or sealless construction
- Special lengths up to 2500mm available
|
|
|
Small labor- and barrel pump for filling, emptying, transferring or dispensing small amounts of low viscosity, neutral or corrosive liquids out of carboys, hobbocks, canisters, narrow-necked containers or barrels.
|
|
The new electric drum and container pump Lutz B2 Vario includes a reliable and tested technique together with a number of new functions providing perfect fluid management solutions, never mind the industry you are in. The infinitely variable speed controller with integrated on/off switch allows a controlled and comfortable filling of smaller and larger liquid amounts.
The pump is ideally suited for use in the laboratory sector as well as for applications in the industry. Also available as complete pump set with PVC hose, wall bracket and one-hand nozzle.
- Infinitely variable speed controller to transferring liquids in small
amounts.
- Pump tube without grease fillings, thus no contamination of the liquid.
- Different lenghts 500, 700 and 1000 mm for the use in small vessels up
to a 200 l drum.
- Wide range of applications by sealless construction.
- Service-friendly and easy to dismantle
- Available in polypropylene (PP) and stainless steel (1.4571)
|
|
|
|
|
|
Pneumatic drive bellows pumps FS series
High-speed strokes
An incease in the speed of pump strokes (240 spm maximum) resulted in a reduction of size, weight and costs involved in the manufacture of the pump as well as a decrease in pulsation.
Note: Pump strokes are different depending on the pump model.
Contamination free design
All of the parts which come into contact with liquid are made of fluororesin. The pump is designed so no metal portion is exposed. The exterior is also coated with fluororesin. The use of a shaft seal (patent pending), our own development, has the effect of remarkably decreasing the production of particles.
Wide range of liquid temperatures/ high-pressure discharge
As it can handle liquids with temperatures ranging from 5 - 180 C deg. with discharge pressures up to 45MPa, the pump is usable not only for cleaning processes and CMP processes but also for feeding chemical liquids.
Facility of maintenance
The proximity switch can be replaced without disassembling the pump and regular tightening of stud bolts is unnecessary, resulting in reduced downtime.
Sensor Drive System
The pump uses the sensor drive system which opens/closes the solenoid by means of a proximity switch built internally. Therefore, when connected to various controllers, the discharge can be controlled or managed easily.
|
|
|
The specialists for liquid transfer out of barrels and containers. Suitable for thin, neutral, corrosive or high flammability liquids. Successfully used in almost every industry all over the world !
|
|
|
Advanced pump design, ideal for use in the pharmaceutical, cosmetics and food industry. Each sanitary pump can be stripped down in no time for cleaning and/or sterilization. Also available with 3A certification.
|
|
|
The experts in transferring low to high viscosity, pasty, but still free flowing products. Suitable for food, pharmaceutical, cosmetics and chemical products as well as petroleum products.
|
|
Vertical eccentric screw drum pumps for media up to 100 000 mPas.
Flow rate: 12, 25, 50, 80, 200 or 300 l/ min.
Pressure: 6 or 12 bar
Also horizontal pumps are available.
The products of this manufacturer have a very good cost/ performance ratio. The pumps have standed the test of time since many years in nearly all industries worldwide.
|
|
Viscous and shear-sensitive media call for espacially gentle handlicg - eccentric screw pumps of the B70 and HD-E series are the best "partners" in industrial environments. The are ideal for handling highly viscous, neutral, aggeressive and easily inflammable liquids.
They resist wear delete well, are robust and operationally safe and they are easy to detach and to clean.
- Viscosities up to 100.000 mPas
- Pump capacity 1-120 l/min,
- Delivery head up to 12 bar
- Smoth flow
- Simple and easily dismanted
- Quiet operation
- Also available in Ex construction for flammable liquids
(Atex 100a).)
- Electric and pneumatic drives possible
|
|
These fully serviceable, long life, low cost pumps have been engineered for trouble free use and can be used with a wide variety of non-corrosive liquids. Pump operates on the downstroke.
Features
- suitable for kerosene, two stroke mix up to and SAE 140
- sliding bung adaptors suit containers from 15 L (4 US gal) to 25 L (6 US gal)
- zinc versions are available for use in underground coal mines
- fully serviceable
- 10 year parts availability
- 10 year warranty
|
|
| ... products without technical information |
| |
... see all the products in the category
Drum pumps
|
|
|
