|
|
Voltage: 24 V DC
Coil terminals Flying leads: 10 cm
Weight complete solenoid : approx. 6 g
Weight armature : approx. 1.6 g
Nominal coil power Pn : 7.2 W
Actuation time (ED) : 12 ms
Drop-out time: 7 ms
Thermal Stability: E (max. permissible temperature = 120 °C)
Insulation group according to VDE 0110 C 75
Test voltage : 500 V (eff)
Protection : IP 00 |
|
Voltage: 24 V DC
Coil terminals Flying leads: 10 cm
Weight complete solenoid : approx. 60 g
Weight armature approx : 12 g
Nominal coil power Pn : 3.9 W
Actuation time (ED) : 11 ms
Thermal Stability : B (max. permissible temperature = 130 °C)
Insulation group according to VDE 0110 C 300
Test voltage : 800 V (eff) |
|
Compact dimensions and low power consumption but maximum
linear work, fast switching times and smooth operation characterise
these solenoids. They are used in all types of engineering
applications - in machine tools and packaging machines,
in automatic systems and office equipment, in regulation and
control systems. In short, these reliable components can be used
wherever high demands are placed on operational reliability.
Deliverable are also:
- Magnets for EX applications with ATEX certification
- Spreading solenoids for braking operations
- Locking solenoids
Standard voltage: 24 V DC
with plug-in connector with integral rectifier:
230 V AC, 40 - 60 Hz (205 V DC)
Other voltages available on request (for a surcharge).
Standard duty cycle: 100 %
Stroke length: 8 - 60 mm |
|
Voltage : 24 V DC
Coil terminals Flying leads : 5 cm
Weight complete solenoid : 6 g
Weight armature : 1.6 g
Nominal coil power Pn: 1.1 W
Insulation group according to DIN VDE 0110-1: 0.5 KV/1
Test voltage : 500 V (eff) |
|
Sizes : 2
Nominal voltage : 24 V DC
Current rating : 160 mA
Nominal resistance : 151 %u03A9
Initial torque : 0.18 Ncm
End torque : 0.44 Ncm
Perm. duty cycle : 100 % ED
Thermal Stability : B (max. permissible temperature = 130 °C)
Test voltage : 1500 V (eff)
Weight approx. 75 g
Dyn. moment of inertia approx. 0.1·10-6 kg m2
Time constant approx. 2-6 ms |
|
DC single direction linear solenoids are the universal, inexpensive
answer for precision engineering and industrial applications as
well as for locking/latching requirements.
They can be installed in any position. Push or pull actuation is
possible. However, the force transfer should be in the axial direction
only; lateral loads increase the wear on the bearings.
Specifications with or without return spring possible. Optionally monostable or bistable operation method possible.
Standard voltage: 24 V DC/ 205 V DC
Standard duty cycle: 100 %
Stroke length: 3 - 30 mm |
|
| Solenoid coils work in conjuction with solenoid valves. The coil provides electrical power to the solenoid valve, causing the solenoid valve to open or close depending on the valve model. |
|
Switching and proportional solenoids
Flange connection with robust body made of steel
Submerged solenoids
Potted as a standard
Sizes 29 mm, 35 mm, 45 mm
and 60 mm
Static pressure proof up to 350 bar
DC executions (10...250 VDC)
AC executions (24...250VAC) with integrated
rectification
|
|
| solenoids - electromagnets for stop and accelerations of the diesel motors - of traction and push - to continuativo or intermittent service |
|
Made according to the following norms: DIN VDE0580, NFC79300 y UNE-EN 60204-1..
Bistable solenoid is a simple effect product, the stroke from the initial position (s) to the end is made by a direct or retified electrical polarized signal. To return to the initial position it is necessary to send an electrical signal of inverse polarity (direct or alternating) equal to the nominal voltage, this signal will only vary the force of the magnet, it will not produce any returning or repulsion force. To make the plunger return to its initial position it is necessary to use external forces such as a spring.
CE-This product is made according to the 73/23/CEE Low Voltage European Guideline about electrical appliance for certain limits of voltage and modification 93/68/CEE. The fulfilment of the 89/336 CEE (electromagnetic compatibility) norms must be assured by the user.
|
|
Part number 8.01.42.03 8.02.13.62 8.54.AA.62
Shown in
energised position
For a more detailed drawing
please request the
specifications sheet
of the product
8.02 8.54
Nominal stroke 3 mm 4 mm 4 mm
Absorbed
1,3 4,8 21,5 4 13 40 5,3 16 60
power (W)
Force at beginning of stroke (N) 0,05 0,2 0,8 0,3 0,8 2 0,5 1,5 5,6
Force at end of stroke (N) 0,5 1,1 2 2,4 3,4 5 2,4 4,9 12
Duty cycle 100% 25% 5% 100% 25% 5 % 100% 25 % 5 %
Total length of cycle 2 mn 2 mn 2 mn 2 mn 2 mn 2 mn
Standard voltage 12 Vdc 24 Vdc 24 Vdc
Function Pull Push-Pull Push-Pull
Incorporating return spring no no yes
Plunger retainer no no no
Totale weight 10 g 30 g 45 g
Plunger weight 2,5 g 10 g 10 g
Protection rating IP00 IP40 IP00 |
|
MECALECTRO electro mechanical devices are high performance products primarily for industrial applications.
Where high speed, long life, high efficiency, and reliability are of paramount importance we have a broad range of actuator devices to suit many fields of use.
MECALECTRO supplies one of the world's broadest ranges of high performance solenoids.
Both linear and rotary solenoids are offered in forms from simple 'on-off' actuation, to sophisticated proportional devices with controllable force or torque.
Where a standard part will not suit your application, our engineering staff can advise on feasibility of modified or custom solutions.
|
|
| Industrial Solenoids are electromagnets which come in many different sizes and apply a straight line force, in a push or pull motion, when energized. (CR9500, CR9503 Series) |
|
Manufacture of coils of electromagnets in the fields:
- textile
- heater
- magnetic chucks
- car
- elevators |
|
| ... products without technical information |
| |
|
|
