Features
AMC.0 Rev.2 front panel compliant
...
Features
Sustained read up to 420 MB/s
Sustained ...
Debem manufactured resin-encased horizontal centrifugal pumps are pumps operated by a direct-drive motor (max 3000 rpm) for ...
A couple of magnets leads the operation of the pump; the outer magnet placed on the drive shaft transmits the motion to the inner magnet integrated with the impeller that is hermetically insulated. The pump impeller is not physically fixed ...
Haydon Kerk Motion Solutions has introduced the Haydon™ RoHS compliant PCM7539X IDEA™ programmable stepper motor drive capable of a 75VDC input voltage and a max output current of 3.85A RMS. This unit is designed to control the larger-size stepper motor linear actuators offered by Haydon Kerk and has the same functionality and programmability as the lower- power IDEA drives. ...
The Haydon™ DCS4020 Chopper Drive delivers optimum performance
throughout a greater speed range. This new technology drive has been designed for easy set up and use. The Haydon DCS4020 is ideal for development projects ...
MLX81200
The MLX81200 is a highly integrated 3 phase motor controller for 12V BLDC or PMSM automotive applications.
Its TruSense and SineDrive technologies ...
The evaluation board EVB90109 has been developed by Melexis to create specific applications using 125 kHz protocols and to evaluate the advantages ...
The TRM Range of Analogue Amplifier is a breakthrough in amplifier technology. Utilising the latest in electronic techniques, this compact current mode amplifier is capable of driving brushed DC Servo motors continuously at 100 volts and upto 20 amps depending on the model. Using the latest technology has enabled TRM to produce a small and very competitive amplifier.
Easily ...
The TRM Range of Analogue Amplifier is a breakthrough in amplifier technology. Utilising the latest in electronic techniques, this compact current mode amplifier is capable of driving brushed DC Servo motors continuously at 100 volts and upto 20 amps depending on the model. Using the latest technology has enabled TRM to produce a small and very competitive amplifier.
Easily ...
Cross & Morse Timing Belt Drives take their place in industry as a highly efficient, job proven medium for mechanical power transmission.
They are highly versatile in application and speed range.
Timing belt drives are positive and offer accurate synchronisation of speed, and often make possible worthwhile economies in the design of a machine, because they require less space, reduce bearing ...
INGEDRIVE® is a family of low- and medium-voltage, modular AC drives, for demanding single-motor or multi-motor applications. They can handle and control synchronous motors, asynchronous induction motors, and permanent magnet motors. These drives are suitable for four-quadrant ...
The VXM is a high performance, programmable, 2 phase, unipolar stepper motor controller. It features:
* Small size (3.5" x 4.4" x 6.6") and ...
Brushless motor drive BLD-4202 is complete set, which is ready to operate. The brushless drive consist of industrial 3-phase 52W motor with Hall encoder FL42BLS02 and brushless controller BLD-20 for adjusting speed, direction, acceleration and deceleration of the motor. Controller is designed for joint action with the ...
Brushless motor drive BLD-4204
Brushless motor drive BLD-4204 is complete set, which is ready to operate. The brushless drive consist of industrial 3-phase 105W motor with Hall encoder FL42BLS04 and brushless controller BLD-20 for adjusting speed, direction, acceleration and deceleration of the motor. Controller is designed ...
Brushless motor drive BLD-5704 is complete set, which is ready to operate. The brushless drive consist of industrial 3-phase 180W motor with Hall encoder FL57BLS04 and brushless controller BLD-20 for adjusting speed, direction, acceleration and deceleration of the motor. Controller is designed for joint action with the ...
The KBRG™ is a full-wave regenerative control, capable of operating a DC motor (Permanent Magnet or Shunt) in a bidirectional mode. It provides 4-quadrant operation ...
The KBMG-Series are ultracompact 115/230 VAC, full-wave regenerative drives capable of operating 90 and or 180 VDC PM or Shunt motors from 1/50-3.0 HP (.01-2.25kW) in a bidirectional mode. Its 4-quadrant operation provides forward and reverse torque in both speed directions. Through a ...
The KBRC-240D is a Full-Wave Regenerative Drive in a NEMA-4X/ IP-65 washdown and watertight enclosure. It is designed to operate 90 and 180 Volt Permanent Magnet and Shunt Wound DC motors in a bidirectional mode. It provides 4-quadrant operation, which allows forward and reverse torque in both speed directions. This allows the control to maintain constant speed with overhauling loads and provides ...
Today's venetian blind motors are the result of decades of experience ...
Expanded capability profile in comparison with traditional motors
based on AC-motors with mechanical end limit switches.
- Slow speed at each start in each direction of rotation enables
a sensitive setting of the slat angle thus an optimized controlling ...
This version is available at our brushless DC-motors at the BG44, BG45, BG65, BG75 as well as ...
IDM680 Intelligent Servo Drive with EtherCAT
Based on the Technosoft MotionChip™ technology, the IDM680 intelligent servo drive embeds motion programmer, drive and PLC functionalities into a single compact unit. This drive can operate either as a standard EtherCAT slave supporting CANopen over EtherCAT (CoE) protocol, or can be programmed to execute complex motion programs directly at drive ...
iPOS3604 BX Intelligent Servo Minidrive
The iPOS3604 BX is based on a new design concept for closed-frame drives, offering a very compact and cost-effective solution for the control of rotary or linear brushless, DC brush, and step motors of powers up to 144 W, with 36 V nominal voltage.
iPOS3604 BX Features:
• Fully digital servo drive suitable for the control of rotary ...
PIM2401 Intelligent Control Plug-in Module
PIM2401 is a cost-effective solution adapted to the distributed and co-ordinated control of motors up to 25 W, 24 V. PIM2401 is specially designed for motion control applications where space is dramatically limited. Its miniature size (49 x 44 x 14 mm,15 g) allow it to be mounted horizontally or vertically, inside the machine or near the motor. The ...
Available in four current outputs up to 48 Amps, to closely match your motor requirements. To make installation easier, you can quickly connect using screw terminals.
Easy to access control terminals, extensive features and I/O make this range of DC motor controllers an industry standard.
With line-to-line or line-to-neutral operation up to 48 Amps, you ...
This 4 Quadrant regenerative DC motor controller gives a fast controlled response over the full forward/reverse speed range for motoring and braking.
Improve your energy efficiency by regenerating energy into the mains supply whilst under braking. The energy invested accelerating the load mass is recovered when braking. No dissipation of energy in wasteful ...
Make upgrading your existing control panel easier. Save space in new DC single direction motor control systems. The ultra compact DIN rail mounting package lets you install quickly.
Three options are available for controlling DC motors up to 12.2 Amps. You can use this versatile range of non-isolated controllers for permanent ...
• Input voltage from 12VDC to 48VDC
• Peak current up to 20 Amps Peak
• Continuous current up to 10 Amps
• Maximum wattage of 500 Watts
(more than 500 Watts requires a larger heat sink)
• Chopping ...
- 3-axis step motor controller and driver PCB
- Phase currents between 0.2 to 1.5 Amps/Phase (Software Programmable)
- Software selectable step resolutions from Full step, Half step, and 4x, 8x, 16x, 32x, 64x microstepping operating.
- ...
The TMCM-310 is a triple axis 2-phase stepper motor controller and driver module. It provides a complete single board motion control solution at low cost. Using the integrated additional I/Os it even can do complete system control applications. The motors and switches can be connected ...
