|
|
|
|
|
|
Both solutions can be integrated in a Multi Intervention Tower®, along with other related equipment such as skidding systems, moonpool systems and personnel access systems. The Multi Intervention Tower® can also be scaled down to provide regular subsea construction services. We can also provide add-on intervention handling systems for existing support structures.
Multi Intervention Tower
Module Handling Tower - Tower, Skid System and Moonpool
Grenland Group designs and builds module handling towers for subsea well-intervention operations.
The design for the equipment is based on safety for personnel and environment, and for simple and efficient handling of different subsea modules. In addition, the equipment gives easy access for inspection, maintenance and replacement of parts.
Main Features:
- Hydraulic power pack is mounted in a standard 20' ISO container with interface connections for hydraulic and power supply outside the container
- All internal power cable, signal cable and piping are included on the equipment
- Arrangement for local or remote control from control cabin
- Time-effective mobilisation/demobilization of winches
- Heave elimination
- Easy vessel interface
|
|
On request we study, design and carry out specific préhenseurs adapted to the handled product and the user.
Example of handled products:
- Glazing, Panel of wood.
- Barrels.
- Reels.
- Paperboards.
- Castings.
- Bags.
- automobile Parts (limps speed, coils, doors, cap, seats, panel instrument...)
Turnkey installation.
|
|
CON-BOB-10MU
Container you carry out coils: movimentabile with crane', undercarriage elevator or transpallet; accatastabile till four plans (with development possibility); loading coils, till max diameter 1000 with crane' or undercarriage elevator; transportable on truck (pianale min. larg. 2000 milimeter) in two rows to two plans.
|
|
|
|
|
|
Space restrictions, a frequent concern in web installations, can often be overcome by turning the web to allow for stacked equipment. However, conventional turner bars or sweat rolls require physical contact which can damage the web surface and cause web creasing. MEGTEC offers a better solution -- MEGTEC Air Turns.
MEGTEC Air Turns use a cushion of air to float the web as it is turned. No surface-to-surface contact is required. Productivity is improved over traditional turner bars because marking and other contact-related defects are eliminated. Air Turns are a safe, effective and reliable method for changing web direction.
Air Turns can be designed to operate smoothly at web tensions as low as 0.25 PLI and as high as 5 PLI. The unit's lateral sectors permit selective air pressure adjustment across its entire width, allowing the Air Turn to compensate for cambered webs and uneven tensions. A sensor automatically adjusts supply air to maintain consistent web-to-surface clearance. The result: excellent transport with no drift or flutter.
|
|
|
|
|
|
AUTOMATIC systems designed and produced to handle heavy and/or big materials and equipments. They serve machines and entire production areas.
The systems permit to automatize the material (coils, bars, beams, tubes, etc) and the equipments (dies, etc) loading, unloading and stocking
Main operative features:
- Solution: from the top(automatic overhead bridge cranes, manipulators) and from the ground (shuttles)
- Max material weight: from 1 to 100 metric ton
- Max material dimensions: Without real limits
- Environment: All typologies of manufacturing industries, industries with heavy service, industries with heavy duty environments
Main functional features:
- Variable performances in function of the material typology handled.
- Use of market leader brand for all the automation components
- SCADA systems, for controlling and monitoring, verticalized for process typology.
- Management of the missions and of the execution priorities
- Full modularity and configurability of the control system
- Statistic and Historical reports
- Predisposition to bi-directional links with stocking and production systems (bus, network, hw signals).
- Predisposition to bi-directional links with company information systems (ERP, MES, MRP)
Hardware - Mechanical
The higher percentage of the solutions use specific overhead bridge cranes designed and produced in consideration of our experiences and of real process requirements.
They are equipped with all the right accessories in order to guarantee their correct operation regarding performances, precisions with the maintenance of a very high reliability and safety level.
|
|
|
|
|
|
HANDLING AND STOCKING CRANES FOR HEAT TREATMENT PLANTS
Verticalized systems to handle and stock material inside the execution of the heat treatment process.
The Bonfanti's systems are designed and produced in the respect of the ISO 9001 norms (TUV).
Main material features of the material:
- Max weight: up to 60 metric ton
- Max dimensions: without a real limit
- Superficial temperature: up to 1200 °C
These cranes are specially designed to operate in aggressive environments particularly in terms of the temperatures. They are equipped with all the necessary protections for the environmental temperature
and for the thermal radiations generated by the material during his handling after a thermal cycle.
Typologies of use:
- Manual
- Semi-automatic and/or automatic (on request)
The supply include:
1) Complete crane
2) Under-hook equipment to keep material (pliers, forks, etc)
3) Optionals:
- Automation system (in case is requested the semi-automatic or automatic functionality)
- Management and control system
- Link with external equipment (heater, cooling baths, loading and unloading bays, etc)
- Link with management systems (ERP, MRP, MES)
- Material dimension control equipments
|
|
Standard solutions are developed for conveying, elevating, turning, rejecting, diverting, combining and collating products, from cores via naked tissue to finished packs, bags and bundles.
With our proven standard solutions together with concepts for control hardware and installation, control logic, and operator interface we reach a flexible and profitable solution in a short period of time.
- Compact and space efficient for high machine density
- Easily operated and high accessibility
- Proven solutions with high availability
- Flexible solutions for future extensions
- Efficient installation and ramp-up
- Global experience and local service worldwide
|
|
Scaglia INDEVA offers the most complete range of industrial manipulator on the market, including both traditional pneumatic manipulators and state of the art electronic manipulators, better referred to as INDEVA.
Pneumatic manipulators are ideal to handle offset loads while Indeva are ideal anywhere speed, fluid movement and exact positioning of the load are required.
|
|
Automated paper roll handling, combined with MEGTEC's "no-operator-presence" flying pasters offer significant benefits to web printers to improve their overall productivity and return on investment.
Paper represents 50-70% of total web printing costs. Even a small reduction in paper waste can yield a significant cost saving. Manual paper roll handling can be a major cause of waste resulting from damage to rolls in transit to the paster, excessive slab waste, and the moving and storing of unwrapped rolls on the floor. Poor splice preparation resulting in a web break is another avoidable waste cause. Measurement of roll, wrap, slab and core waste allows paper consumption to be monitored.
MEGTEC pioneered 100% "no-operator-presence" paper roll changing and since its introduction has resulted in dozens of installations running successfully even in extreme operating conditions.
|
|
Bushman AvonTec manufactures a wide variety of custom engineered lifting devices to meet the roll handling needs of the paper, textile and other industries. This equipment is custom designed to perform a wide variety of operations safely and efficiently while preserving the integrity of even the most fragile roll.
Bushman AvonTec lifting devices are designed and manufactured to meet or exceed the latest revision of ASME Spec. BTH-1: Design of Below-the-Hook Lifting Devices.
|
|
Southworth manufactures a wide variety of equipment for lifting, positioning and transporting large, heavy rolls and coils. From Coil Cars to Roll-Upenders to Tilt Down Tables, southworth has a product for every roll handling or coil handling application.
LS Style Coil Cars
Ideal for smaller/narrower coils
Opposed Cylinder Style Coil Cars
Move coils weighing up to 70 tons
L Cam Style Coil Cars
Move coils weighing up to 20 tons
Roll Upenders
Reorient rolls and coils for transport or loading
Tilt Down Tables
Ideal for loading or unloading rolls from processing machines
|
|
Apparatus: INCLINEUR OF CAR
Used in the demolition contracters, this apparatus makes it possible to incline with 90° a VHU thus making it possible the operator to intervene on the lower part to dismount the low fixing of the engine, to dismount the trains, the exhaust and all other parts accessible by the lower part.
easy to use, leaving the access under the car in full safety without any risk of fall being given the absence of frame in the working area.
Apparatus developed in étroute collaboration with an approved organization and thus conforms to the European regulations.
|
|
TILTMATIC: Pendular dumper of coil.
- Tiltmatic is conceived to be charged coil flat (vertical axis) directly by the forks of the forklift truck.
- The crutch of swing associated with the translation with Tiltmatic generates the rotation of a quarter of lathe of the coil during the first part of the race.
- The last part of the race of Tiltmatic engages the coil on the chuck of the decoiler.
Performances: Taken coil by its always identical internal diameter what allows a fixed height of loading on the decoiler.
- REVERSIBILITY OF THE SYSTEM: an unfinished coil is given flat (vertical axis) while making the opposite way.
Simplicity: Only one travel engine allows the swing of the coil and its engagement on the chuck.
Note: engagement on the chuck is not possible that if the bits are suitably positioned. The expansion of the chuck releases the spindle (hook) of Tiltmatic.
|
|
This appliance server to tilt heavy containers and skeleton containers from which material is to be taken: Thus the material is easily reached. No more strenous bending when taking parts out of deep containers, as the tilting angle 0-90°. The appliance is handled like a pallet truck, i.e. it is also possible to transport containers. The container tilter is deliverable with 12 V,230 V, 400 V power pack or with footpump. All appliances have a tilting angel up to 90° and wheels with Ø200/80 mm.
Dimensions: Length 1230 mm, Width 740 mm, Fork length 820 mm, Fork width 550 mm.
|
|
- Lev 600 Roto-Bobine
- Roll Clamp
- Lev 300 hinged forks
- Roll clamp external grip
- Lev 300 Roto-Bobine
- Lev 300 boom
- Core clamp vertical grip
- Cable drum turner
Cable drum turner
Capacities :
Max load (on LEV 600) = 350 kg (on overhead hoist = 500 kg) Max width = 540 mm Max outer diameter = 720 mm
Description :
Designed to lift and rotate cable drums. This unit can be used on the LEV 300 - 600 stackers or with an overhead hoist.
|
|
| ... products without technical information |
| |
|
ANVER Material Handling Vacuum Lifters allow one person to easily and safely handle large loads. Electric-, compressed-air-, battery- or self-powered lifters are available with a wide variety of pad attachments.
|
|
|
Fast die change with the ROLLBLOC changeable sub plate technology opens up new opportunities to make small batches – even short-term orders from customers in a hurry – economically viable.
|
|
General description:
The InnoLas "Edge-grip" aligner for 300mm wafer never comes in contact with the wafer front or backside.
The "Edge Grip" contact pins are manufactured out of PEEK material. The integrated Pentium controller offers an RS232 interface to the host computer.
|
|
Class 10 Sheet glass server
Hirata’s line of semiconductor material handling systems includes:
# Wafer handling systems — loading andunloading between wafer processing equipment.
# Chip handling systems — lead frame loading after wafer cutting, sortation of chips by performance grade, and labeling of chip package after performance grading.
# IC handling systems — bulk packaging of chips into tubes and trays for shipment.
# Process control systems for proper sequencing of processing equipment based onmanufactured product.
# Robots for clean room applications with class 10 or better, including self-contained vacuum pump.
# Assembly and handling systems for LCD and flat panel production.
# LCD glass handling system
|
|
Pneumatic arm manipulator with multi pads handling attachment for handling of big window panes, panels or sheets. The handling attachment is equipped wit one pneumatic motor gear reducer 180° and with one pneumatic tilting device 90° to allow the operator to orientate the window panes without effort.
Particularly indicated to feed or unload sealing machines, washing machines and sandblasting machines for window panes.
Max capacity 250 kg.
Max work radius 3.7 m.
|
|
Rational handling equipment for all sectors of sheet and flat glass processing.
Bystronic Armatec handling equipment characteristic features:
- careful handling of load
- ergonomics and safety
- minimized effort for the operator
- time saving and cost reduction in manufacturing
process
|
|
|
|
|
|
The Ace Dolly from Wood's Powr-Grip® features a unique mast design
with manually operated vacuum cups, to lift and transport glass
without the need for external power, cranes or high ceilings.
Standard Vacuum Pad Spread:
12" x 61-1/4" [305 x 1556 mm]
Number / Size of Vacuum Pads:
3 / 11" [280 mm] dia. lipped vacuum pads
Overall Dimensions:
30-1/4" [767 mm] wide x 95-1/2" [2426 mm] long
Mast Height:
119-1/2" [3034 mm]
Mast Tilt:
Up to 27" [686 mm] outward from vertical position
Load Capacity:
450 lbs [205 kg]
Unit Weight:
395 lbs [180 kg] (Does not include ballast.)
Standard Features:
Toe-kick floor locks
Auto-brake winch
Special high-capacity Wood's Powr-Grip Vacuum Cups
Smooth gliding rubber rollers
Automatic mast lock
Tilt damper
The Ace Dolly eliminates the need for external power, overhead cranes and high ceilings. Capable of handling glass sizes to 130" x 144" [3302 x 3658 mm], it efficiently lifts and carries large glass where other glass transport systems can't. The versatile design permits glass transfers from either the face or the end of storage racks and cases. A unique mast design features manually operated vacuum cups that grip glass and hold it securely for transport. Smooth gliding rubber rollers support glass weight and ease movement when loading from the end. The manually operated auto-brake winch locks and releases in any position. In use for more than 20 years, the Ace Dolly makes lifting large lites a quick and efficient one-person job.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
