Everywhere where electrical resistance heating is not possible or too extensive but optimum heat distribution at lowest emission is required you can find SUNSRAYS® infrared gas burners in use. Using ...
• Available in output ratings of 2400 kcal
• ...
Specifications:
Firing rates - up to 220 kW (750, 000 BTU/h) per 12 inch (305 mm) burner length
Process air velocity range 7.5 to 18 m/s (1500 to 3500 ft/min)
Differential air pressure range 0.5 to 3.0 mbar (0.2 to 1.2 in w. G). (across the burner)
Turndown: ...
These machines have been specially developed for their application in forging.
Designed for bar ends heating (screws, ties, bolts, ankles, etc.) with series of average type, as ...
The FM type induction heating machines are designed to the forging temperature of round and square billets section induction heating.
Their modular conception allows the operator, from standard elements, to form ...
The FG type induction heating machines are designed to the forging of large parts.
Their modular conception allows the operator, from standard elements, to form the machine in order to adapt it to his needs.
A transistors generator is ...
Steam Injection Constant Flow Heater
Constant Flow Steam Injection HeaterThe Pick Constant Flow Direct Steam Injection Heater is used wherever ...
Steam Injection Variable Flow Heater
Pick Variable Flow steam injection heaterThe Pick Variable Flow Direct Steam Injection Heater is designed to deliver hot water at a precisely controlled ...
Starch cooking with Pick Direct Steam Injection
pulp & paper industryThe Pick "BX Series" of Direct Steam Injection Heaters is designed ...
Cartridges with high charge watts.
They provide a great uniform distribution of heat, and are made hermetically, ...
Cartridges with low voltage charge are the most suitable for moderate heating up to 300ºC. Made with best quality stainless steel tube that can be found, or with other material such as copper, brass or aluminium. Everything is perfectly ...
Maxiwatt cartridge heaters are most suitable for moderate heating up to a maximum temperature of 300ºC. Made with stainless steel tube of the finest ...
a single system
with the unequalled performances.
T.Flow Activ ...
• Horizontal thermal fluid heaters, multi-coil design, ...
The heaters FIREPACK and FIREPACKETT are the fusion of a vast experience in design and construction of thermal oil boilers.
Since 1958 (year of construction of the first thermal oil generators built by SIAT) we have made safety and thermal efficiency a top priority in our generators obtaining excellent results. ...
NFRARED OVENS MT ovens are built to dry pad or silkscreen printed surfaces. The drying process is possible trough infrared rays or by a Master Flow. In the MT2 model and ventilated air (both together or separatly).
Infrared ceramic lamps at high yield.
Controlled ...
Fluxtrol concentrator manufacturing and application technique plays a very important role in successful performance of induction coils. ...
High frequency generator for quality control, HTG 1500/0,5
Control System:
Multifunctional controller SE 402 for controlling and watching the process and display ...
with two switchable output transformers and induction coils.
Principle use of this generator is soldering and heating of small filigree workpieces with minimum dimensions of 1/10 mm. The high frequency involved with the low penetration depth in the material makes it possible to heat thin wires continuously under effective ...
Tmax: 1600 °C Vacuum: 10-6 mbar
Power: 3 kW
Ceramic ...
Explosion-proof heating oven and drying oven VFT 60/90
The VFT 60/90 is an ex-proof fresh air heating and drying oven. The oven is electrically heated and designed ...
Explosion-proof heating and drying oven, series VTUW
The amount of combustible solvents is nearly unlimited in this oven. It can be installed ...
Explosion-proof heating ovens and drying ovens, series VTUW, in GMP-/FDA-suitable design
The amount of combustible solvents is nearly unlimited in this oven. ...
A SINGLE INVESTMENT FOR A COMPLETE CHARACTERIZATION OF MATERIALS!
DOUBLE, TRIPLE OR QUADRUPLE THE NUMBER OF TESTS PER DAY!
ANALYSIS WITH THE UNDUSTRIAL OR INSTANTANEOUS FIRING CYCLES!
TIME SAVING IN THE SAMPLE PREPARATION!
Misura® Heating Microscopes are the result of more than twenty ...
A SINGLE INVESTMENT FOR A COMPLETE CHARACTERIZATION OF MATERIALS!
DOUBLE, TRIPLE OR QUADRUPLE TE NUMBER OF TESTS PER DAY!
TIME SAVING IN THE SAMPLE PREPARATION!
Misura® Heating Microscopes are the result of more than twenty years ...
Hotbox
The Hotbox is a heating circulator with CC-Pilot for thermoregulation ...
Unichillers® are intelligent chillers which are used mainly as an environmentally friendly and economic alternative to tap water for process cooling. Low temperatures ...
Dampers with manual adjustment
Diameters 50 - 315mm
50 - 400mm
...
Type：TN360C
B:Temperature control segment:12 up 6/ below 6,extra:Cooling monitor system, up 1/ below 1
C:Temperature control accuracy:±2℃ Warm-up time : 30min
D:Temperature range:Room-temperature ...
FHK pipe system
Flexible, endless production, double-walled, monitorable and self-compensating pipe system, ...
iKLIMA from GF Piping Systems is a radiant floor heating and cooling systems, composed of insulating panels, piping and regulation system.
With iKLIMA system you can reduce ...
