|
|
Molykote® compressor and pump fluids are formulated to meet or exceed the performance of comparable
OEM fill products. With the exception of L-3232 and L-3246, these fluids are all compatible with
mineral oils and systems designed for mineral oil lubrication. Dow Corning can perform oil analysis to
ensure that the right product is used for each application and that product life is maximized.
|
|
Cutting Fluid
Ref: HDC
Industrial grade metal working oil
Powerful lubricant and friction reducer
Allows high speed punching
Extends tool life by reducing the risk of pulling
|
|
IonoPlus Dielectric IME-MH
After long years of research oelheld introduces an entirely new, powerful concept into
dielectrics: IonoPlus IME-MH. Unlike conventional mineral oil products, this combination
of highly refined synthetic products is enriched with satellite electrodes in a special
blending process. As a truly universal dielectric, IonoPlus IME-MH is suited for all
operations from the finest finishing processes to the most effective rough cut. Besides
having the best possible effectiveness in flushing and the greatest possible disruptive
strength, it offers a whole series of unique advantages.
|
|
|
|
|
|
Molykote® synthetic oils are produced
through chemical synthesis to meet
targeted performance specifications and
to minimize impurities. Synthetic oils
are formulated with new generation
performance-enhancing additives.
Molykote mineral oils are produced in
a series of proprietary hydroprocessing
steps, which ensures that they are nearly
free of contaminants. Synthetic blends are
comprised of synthetic and hydroprocessed
mineral oil base stocks.
All oils in this section are available in pails
and drums.
Molykote® gearbox lubricants help prevent wear and process interruptions in power transmission
systems and components. Compared to conventional oils they also offer greater resistance to
oxidation and stable performance at high temperatures and under high loads. Molykote gearbox oils
maximize fill intervals and maintain viscosity characteristics at wide temperature ranges. Molykote
gearbox oils meet AGMA 9005-E02. In addition to AGMA, Molykote L-21XX series gearbox oils also
meet DIN 51 517 Part 3, US Steel 224, Flender, Cincinnati Machine, David Brown SL.53.101.
|
|
FLUID-setral-SHG 180 Synthetic machine oil for hollow glass ware
manufacturing machines (e.g. Emhart machines), up to +160°C
FLUID-setral-SHT series Synthetic oils for chains in drying ovens, varnishing
and coating machines, up to +250°C
COVA-setral-SE series Synthetic compressor oils for piston and rotary
compressors and vacuum pumps, > +100°C
COVA-setral-BIO 46 Synthetic, bio-degradable compressor oil
HYD-setral-HS 46 Semi-synthetic multi-grade hydraulic oil
HYD-setral-SE/HFD 46 EP Synthetic, fire-resistant hydraulic fluid,
bio-degradable, up to +150°C
SYN-setral-GEAR PG series Synthetic gear oils especially for worm gears as well
as heated equipment
COVA-setral-HS 46 Semi-synthetic compressor oil for screw compressors
|
|
Molykote® hydraulic oils minimize formation of emulsions in contact with water due to the purity of
the base fluid. They will generally perform successfully in hydraulic systems far longer than conventional
hydraulic oils. Plants can gain significant savings from reduced oil consumption, reduced disposal
cost, labor savings and fewer interruptions to production. These non-toxic oils are derived from hydrocracked
or synthetic base stocks and can be used in systems designed for low pour point or high flash
point mineral oils.
|
|
As wasserlöslisches cutting oil we recommend AquaTec 7560.
AquaTec 7560 offers extremely high stability also without use of additives.
AquaTec 7560 ensures small care expenditure
AquaTec 7560 does not have foam problems
AquaTec 7560 is universally applicable on individual machines and central plants.
AquaTec 7560 carries a very high machine cleaning effect out
AquaTec 7560 has small air pollution
AquaTec 7560 does not know problems with corrosions
AquaTec 7560 offers very high tool tools
AquaTec 7560 reached better surfaces
|
|
|
The products of the SulFol LC-row developed from solventrafinierten basic oils are characterized by outstanding cool, net and lubricating actions. This leads to a substantial improvement of the surface quality and the tool service lives. Due to the special Hochleistungsadditivierung all lubricants of the SulFol LC-row possess a very good resistance to aging and an optimal viscosity temperature behavior.
|
|
The CUTTING OIL ENTIERE is a cutting fluid, containing paraffinic mineral oils, developed for the current operations in machining such boring, milling, turning and undercutting.
General-purpose product, it can be used on non-ferrous metals, mild steels, medium steels and the cast iron.
|
|
|
Also with these lubricants we remain naturally for our mark concept "humanly Technology - faithful for humans, nature and machine". All products of the SulFol LC-row are, almost aromatic-free free from chlorine and oil mist-poor. Test us!
|
|
Our shaping oils from the rows dia.-press and dia. CUT are chlorine and heavy metal-free high speed lubricants for punching and shaping processes of each degree of difficulty.
Selected basis oils and additives form mechanically and thermally extremely sturdy lubrication films with high printing pressure for optimal flow of material and small wear of tools.
|
|
|
The particularly developed cutting oil from the SulFol LC-row is particularly for applications in the range of the machine cutting with geometrically defined cut the optimal solution and by their Additivierung on the most current conditions of the cutting oil technology.
|
|
|
HiPure HLPD 68 is a purify-filtered zinc-free, paraffin-basic spindle oil of oelheld. HiPure HLPD 68 is provided with additives for the increase of ageing stability and for the optimization of the Gleitverhaltens. This product offers excellent detergierende and dispersing characteristics. It has further an excellent corrosion protection behavior.
|
|
|
The portable insulating oil tester DPA 75 measures the electric breakdown strength of insulating liquids.
|
|
Exxon Superflo High Mileage 5W-30, 10W-30, and 10W-40, are high quality engine oils that combine a seal conditioner to help prevent leaks in high-mileage engines - coupled with excellent anti-wear protection and special friction-reducing technology.
Features and Benefits
Exxon Superflo High Mileage 5W-30, 10W-30, and 10W-40 provides vital protection for high-mileage engines (typically engines with over 75,000 miles) through a combination of a seal conditioner, high quality base oils, and other performance additives. Exxon Superflo High Mileage 5W-30, 10W-30, and 10W-40 helps prevent leaks in older engines and protects engines from build up of harmful deposits, sludge and varnish. The 5W-30 and 10W-30 grades are specially formulated as ILSAC "energy conserving" to provide fuel savings benefits.
|
|
Sapphire Hi-Torque is a broad range of high performance gear oils. Designed to extend gearbox life, all contain the advanced SuPs system to ensure maximum protection on start up. Available as ISO VG 100, 220, 320, 460 and 680 grades, all contain extreme pressure and high load additives to protect the gearbox from wear and shock loads while being highly thermally stable and low foaming.
- Temperature range -20 to +120°C.
|
|
|
High performance, flexibility, economy and trouble-free processes, these are priorities in all modern forming operations. Rhenus brand lubricating oils guarantee a long service life, trouble-free process and minimal use of lubricant. The elimination of pickling stages and the saving of phosphating without loss of quality makes a significant contribution to the reduction of process costs. Rhenus special oils for forming are available for a wide range of applications from steel through aluminium to copper. Likewise for corrosion protection on machine, workpiece and tool. Environmental compatibility and work safety are guaranteed by low-aromatic compound oils, absence of chlorine and preferred use of sustainable raw materials.
|
|
Our whole oils, formulated on highly refined mineral basis, bases synthetic or bases vegetable, integrate a rigorous selection of additives (extreme-pressure, antiusure, antioxydant, fog).
They allow all the operations of machining: correction, turning, milling, drilling, boring, stitching,..., on all types of metals: cast iron, steel, titanium, nickel, aluminum, copper,...
|
|
PLANTOCUT 7F a biodegradable cutting oil, without chlorine. It is appropriate in particular for the operations of machining with frictions tools parts very
important by reducing the wear of the cutting tools. PLANTOCUT 7 F are especially recommended for the operations of tapping and drilling in
outside.
Compatible all metals.
Ecological engine not diffusing dansl' atmosphere.
|
|
|
Fuchs Lubrifiant France proposes a lubricants range specific to the operations of cold deformation of metals: cutting, stamping, shaping, swifting, hydrospinning, striking...
|
|
FUCHS LUBRICANT proposes a broad line of goods of lubrication on mineral or synthetic basis, additivés extreme pressure for the gears, having high characteristics of adhesiveness for the slides, allowing a good lubrication and désémulsion for the movements and turbines.
Fuchs also offers a broad oils compressors range for all types of materials and a very complete refrigerating oil range for the various systems and refrigerants.
|
|
Our water-soluble oils, free from formaldehyde, are declined in the form of true emulsions, microémulsions and solutions. They were developed to satisfy the requirements of the most recent machine tools, whatever the water quality of dilution (fresh water or lasts).
Our products allow all the operations of machining: correction, turning, milling, drilling, boring, stitching,..., on all types of metals: cast iron, steel, titanium, nickel, aluminum, copper,...
|
|
VIS Mineral oils - Rotary air compressors.
ISO Grades available : 32, 46.
ALTERNA Mineral oils - Reciprocating air compressors.
ISO Grades available : 100, 150.
BAR SY Synthetic oils - Rotary or reciprocating air compressors.
ISO Grades available : 32, 46, 68, 100.
|
|
SUPRACO MPL Gears, multipurpose. Enclosed gears and loaded circulating oil, wheel and worm reducers.
ISO Grades available : 100, 150, 220, 320.
GEAR SY
|
|
Heat and surface treatment
The composition of steels, the geometric shape of the workpieces, their dimensions will require a particular treatment process depending on the required mechanical properties.
The heat treatment installation will impose a type of fluid and constraints of application (temperature of use, speed of circulation of the fluid, etc.).
To meet the largest possible number of treatments, Motul TECH offers a complete range of products: mineral oils, synthetic oils, aqueous synthetic fluids.
Advantages of THERMIC
* Limitation of losses by carry over
* Less distortions
* Limitation of the risk of shrinkage cracks
* Pronounced anti-oxidant character
* Constant quenching power
* Limitation of fire risks
* Large broad cooling range
* Easier washing
|
|
Description
- High performance mineral oil-based metalworking oils.
- Heavy duty versions available for deep hole drilling, broaching, stamping, etc.
- Available in a variety of performance formulations utilizing extreme pressure and/or polaric lubricity additives with or without chlorine.
Applications/Properties
- Universal for machining and grinding of almost all materials.
- Perfect for job-shop screw machine shops.
- Especially suited for CNC machinery including Swiss-automatic lathes.
|
|
RUBRIC Anti oxydation.
RUBRIC HM Anti-wear. Excellent thermal and chemical resistance. All types of hydraulic systems where an anti-wear oil is recommended.
ISO Grades available : 32, 46, 68, 100.
RUBRIC HV Anti-wear. High viscosity index, excellent thermal and chemical resistance. Hydraulic systems enduring great temperature variations.
ISO Grades available : 32, 46, 68.
RUBRIC LX High Performance - Anti wear, zinc free.
|
|
Protection
Our range is built around two technologies:
The first is made up of solutions with solvents which make it possible to answer equally well inter-operational (short-term) needs and very long-term storage.
The second family of products without solvent is particularly original. It is made up of qualities which are ready-to-use or soluble in water. These products are particularly interesting in view of future French and European legislations concerning environment and safety. This range covers all industrial applications from temporary inter-operational protection to long-term protection and sea transport.
|
|
SPEED Very low viscosity. Lubrication of spindles on machine tools.
|
|
|
|
