|
|
SX 375 J
Typical applications: Off-grid and instrumentation
Key features: Instrumentation, off-grid, robust with j-box for field wiring
Cell technology: Polycrystalline
Dimensions: 1209mm x 537mm x 50mm
Weight: 16.94 lbs
Glass type: Low lead, 92% transmission
Frame type: Universal, dark bronze anodized
|
|
Kyocera solar modules are a reliable, virtually maintenance-free power supply designed to convert sunlight into electricity at the highest possible efficiency. The systems using KC moduels are ideal for charging storage batteries to power remote homes, recreational vehicles, boats, telecommunications systems and other consumer and commercial applications.
Kyocera's advanced cell-processing technology and automated production facilities produce highly efficient multi-crystal photovoltaic modules. To protect the cells from the most severe environmental conditions, they are encapsulated between a tempered glass cover and an EVA pottant with a PVF back sheet. The entire laminate is installed in an anodized aluminum frame for structural strength and ease of installation.
|
|
|
|
|
|
The photovoltaic module SOLARDAY PX60 is composed of 60 solar cells in multicrystalline silicon, 156mm x 156 mm size, connected in series.
The Array of solar cells is encapsulated between two sheets of EVA (Ethylen Vinil Acetate), inserted, themselves, between a front tempered glass of the thickness of 4mm, and one rear sheet in PVF/PE/PVF, a particular multilayer film with excellent electrical, chemical and mechanical properties, which assures both the protection of the rear part from accidental hits and the perfect adhesion with EVA.
The used glass offers the necessary protection from the atmospheric agents and, thanks to a particular textured surface, optimizes the collection of the solar light on the cells.
The vacuum-sealed pressing, at 150C, assures the perfect airtight sealing of the module, protecting the high performances of the product over the years.
The frame is realized with an anodized aluminium profile that allows an easy assembling of the module on the support structures.
On the back there is a junction box with protection degree IP65, with bypass diodes, cables and polarized connectors.
This junction box gives the best protection warranties both to the electrical connections and to the module for "hot-spot"
damages.
|
|
Description
The Military Solar Temper Fly field shelter provides 750 Watts of solar power to recharge a bank of batteries, and also provides shade from the sun to reduce solar heat load and protection from rain. Same size and material as standard Temper Fly field shelters.
Developed with Eureka Tents of Johnson Outdoors and FTL Design Engineering Studios
|
|
Description
The Military Solar Quadrant field shelter provides 190 Watts of solar power to recharge a bank of batteries, and also provides shade from the sun to reduce solar heat load and protection from rain. Fits over standard Temper Fly field shelters, drapes over other structures or vehicles, or stretches out on the ground.
Developed with Eureka Tents of Johnson Outdoors and FTL Design Engineering Studios.
|
|
Description
The Military Solar Power Shade field shelter provides 1 Kilowatt of solar power to recharge a bank of batteries, and also provides shade from the sun to reduce solar heat load up to 80-90%. Fits over MGPTS, TEMPER, and ISO Storage.
Developed with Eureka Tents of Johnson Outdoors and FTL Design Engineering Studios.
|
|
|
PowerFilm is integrated with standing seam metal roofing and is conformable to a variety of architectural styles. The low profile and flexibility of PowerFilm enables it to be incorporated with innovative straight or curved architectural structures. PowerFilm not only provides power but also enhances the overall building design.
|
|
Kyocera designs and builds solar electric power systems that have everything you need to generate your own electricity. Our utility interactive systems are installed on the roofs of thousands of grid-connected buildings. These rooftop systems not only produce electricity for households, but also allow surplus energy to be sold back to the utility.
The MyGen Grid-tie Photovoltaic (PV) Power System consists of photovoltaic modules, a direct current to alternating current (DC-to-AC) power conversion device, DC wiring and protection, AC wiring and protection, lightning protection, component mounting and mechanical support.
The MyGen system is designed for use on residential and small commercial buildings of typical construction. Photovoltaic mounting is rafter-secured for structural compliance with most local building codes.
|
|
The typology film used to encapsulate the cells and to link the two sheets of glass determines the two typologies previously indicated.
PVB is used in type A flattened while EVA is used in type B.
PH60-HT-High Transparency Glass/Glass Module is realized by SOLARDAY to reply to the increasing request of architectural needs.
SOLARDAY, for the particular application of glass/glass modules, realizes customized modules according to technical specifications supplied by the customer: dimensions, glass thickness, transparency coefficient and used structure.
High quality and performances of "custom" modules are achieved thanks to the cooperation between SOLARDAY and customers.
Module dimensions can vary from minimum 1000 x 1000 mm. to maximum 1500 x 3000 mm.
|
|
|
SOLARTECNET PV systems are intended for installations at family houses. Produced energy is consumed in the house and the utility buys it back according to Act No.180/2005 at prices declared by the Energy Regulation Authority. The Act guarantees the purchase in 15 years from the time when the system was put into operation.
|
|
FEATURES:
- Thirty-six Multicrystalline / Monocrystalline solar cells connected in series with redundant
- Interconnects. 150 watts module contains seventy-two cells .
- Laminate enclosed in a non-corroding aluminum edge frame anodized to 18 microns.
- Electrical output of module shall be terminated in a weather-proof junction box
- Superstrate construction with toughened glass top surface to withstand winds up to 250Kms/hour.
- Protection against moisture ingress for the solar cells by lamination.
- Provision for mounting of modules on a mechanical structure shall be provided on specific demand.
ELECTRICAL & MECHANICAL FEATURES:
Electrical output of Maharishi solar modules is classified on the basis of the electrical output produced by the solar modules under light intensity conditions of 1000 W / m , AM1.5 spectral irradiance and at 25 C.
The electrical characteristics are typical and subject to production variance, however peak power is the minimum value.
|
|
Solar Wind was one of the first World Solar companies that started manufacturing of high-efficiency bifacial sensitive Solar Modules.
Presently our company is manufacturing variety of fully assembled Solar Modules in the wide power range from 3 W to 110 W, both one-side and bifacial versions. The company is also producing non-standard, partly assembled or metal mounted Modules by a custom request. All Solar Modules are transparent to IR spectrum.
|
|
| ... products without technical information |
| |
|
|
|
|
LINAK perfects movement in tracking systems
For solar panel tracking systems, LINAK offers several strong electric linear actuator solutions depending on your demand for force, stroke, length, and more.
For solar trackers LINAK has several solutions, but we have two main products, which we would like to recommend to you:
LA36 - Ideal Actuator for Solar Tracking systems
LA35 - Another Actuator for Solar Tracking systems
All suitable actuators for Solar Tracking systems
LA36 actuator
LA35 actuator
LA12 actuator
LA30 actuator
LA31 actuator
With LINAK you get
A specialist in electric linear actuator movement. More than 25 years of experience in the industry segment
Sales and service all over Europe, the Americas, Asia and Australia
A competent sparring partner, with great application and product know-how
A high degree of flexibility: small quantities, customised solutions
A broad product range for all demands
Non-corrosive housings and tubes
A long product life due to a robust construction
A low weight
Low current consumption solutions
Exact positioning
High IP rating 66 and 69K
|
|
The new actuator series for solar photovoltaic systems
With the newly developed Aton 1, 2 and 3 linear actuators, elero Linearantriebstechnik offers reliable drive solutions for users of solar photovoltaic systems.
User advantages
- Extremely high statistic loads compared to required dynamic loads
- Corrosion resistance against environmental influences over long periods
- Very high reliability
- Modular system, flexible integration into existing and new systems
- Electronic limit switches, adjustable throughout the whole stroke
- Integrated overload protection
- Maintenance-free throughout the whole service life
Main features
- Statistic loads up to 60,000 N
- Optional voltages:
- 24 V DC
- 230 V AC
- 400 V 3AC
- Limit switch version:
- reed sensors
- electronic, programmable limit switches
- Integrated stroke measurement systems are possible
- Electronic overload protection
- Internal reference sensors
- Self locking
|
|
LAM1 linear actuator
Features :
24/12V DC motor
Maximum push load up to 600kg,
Pull load up to 400kg
Maximum stroke up to 500mm
Low noise, smooth speed
Built-in limit switchesifactory pre-setj
10% duty cycle (10 minutes)
Ambient temperature:-26C-+65C
Protective class: IP52
Accessories: potentiometers, hall sensor,
Over-heat protection
|
|
Venture has a variety of actuators both motorized or manual suitable for Solar Dish or Solar Array applications. These are available as Acme Screw or Ball Screw type actuators in various volages and mounting configurations as noted below.
Standard strokes 4, 8, 12, 18, 24, 32, 36, 40 and 52 inches (custom lengths available)
30% duty cycle motor rating
Optional features include;
Clutch
Limit switches
Reed, Hall Effect, Potentiometer and other sensor options
3000 lb static capacity / up to 1500 lb dynamic load
Lifetime lubrication
Designed for outdoor use
Compression or tension loads
Trunnion, Clevis, or Tube clamp mounting
High strength steel tube assembly with all-steel load support members
Long Life Acme or Ball Screw
12VDC, 24VDC, 36VDC, 90VDC, or 120VDC for rectified 120VAC Gearbox Designs
|
|
SEA linear actuators series is designed for elevation tracking in photovoltaic panels installation with surface from 50 to 300 square meter.
3 sizes available, all self-locking.
Dynamic load capacity from 10 to 100 kN
Linear speeds from 1 mm/s up to 7 mm/s
Stroke lengths up to 1.500 mm
They all have self enclosed limit switches and positioning control via incremental bi-directional encoder. Available with either AC or DC motors.
|
|
|
|
|
|
StarDisc
The q-switched StarDisc offers not merely high power in the fundamental mode TEM00 but also an ideal range of pulse widths. The combination of high pulse peak power and material-adjusted pulse duration provides for outstandingly short process times for various applications.
Application Example Rear Contact Solar Cells
For plating through front sides of solar cells, several 10,000 holes with a diameter of approx. 30 m are drilled into a cell in a grid pattern and filled with conductive material. The StarDisc achieves extremely short processing times per one solar cell of 5-10 seconds . Ideal precondition for an inline integration of plating through procedures into the production process.
Like all lasers made by ROFIN, the StarDisc is based on a platform technology and relies on a consequent modular concept. The user benefits substantially fromMaking use of industry-proven standard components brings substantial benefits to the customers like lower investment costs, less maintenance and higher reliability.
|
|
Nidalu container for solar panels
Container for the solar panels of satellites
Extremely light-weight structure, of Nidalu construction.
|
|
|
|
