|
|
OK INDUSTRIAL PIPES
The Kongskilde OK Pipe Systems are ideal for pneumatic and mechanical conveying. The simple and flexible pipe systems may be adjusted to suit any specific purpose, resulting in shorter conveying distances and, therefore, the most efficient and economical solutions. The OK Pipe System is available in three different diameters: OK 100, OK 160, OK 200 with diameters of 100, 160 and 200 mm, respectively. The dimensions refer to outside pipe diameters.
The OK Pipe System's modular design comprises pipes, bends, branches, diverters, cyclones, outlets, etc. The components are assembled quickly and easily using the unique OK quick release industrial couplings. The wide range of OK piping and accessories ensures flexibility and ease of installation in existing buildings.
|
|
The range in PVDF comprises a complete series of pipes, professional fittings for heat socket fusion, manual and automatic cocks for use in the construction of process lines and service lines to convey industrial fluids in the operating temperature range from - 40°C to 140°C.
The entire range is produced in SOLEF™ resins by SOLVAY S.A. classified according to ASTM D 3222 and compliant with requirements stated in ISO/WD 10931 for the use of PVDF pipeline systems in industrial processes. |
|
Pressed segments with small radius for bulk good handling and pressed bends (with good flow characteristics) with a radius twice as large as diameter (up to 400 mm) for exhaust air/dust extraction plants.
Mass production, all products of the same quality, subsequent components identical. |
|
We are a worldwide market leader for piping systems and components in plastic and complementary materials. The application-oriented system solutions and superior quality components are used for industrial applications, gas and water distribution, and building technology.
PVC-U
PVC-C
ABS
â-PP-H
PP-R
PE 100
PVDF
Pre-Insulated Professional fittings
Double Containment
Multilayer Fittings
PB
|
|
Non-plasticized polyvinyl chloride (PVC -U) pipes for draining rainwater are without doubt the best compromise between technical characteristics and low cost. Their specific use is extremely indicated thanks to their particularly smooth walls. The complete range, their lightness, their ease of installation and connection by means of sockets and connection professional fittings also make Faraplan pipes ideal for ventilation.
Production range: Ø 63 - 630 mm |
|
OLMARK can boast years of experience in designing and manufacturing bended, assembled and flanged rigid pipes (in steel, stainless steel or copper) available in all possible dimensions and shapes required by clients’ technical specifications.
OLMARK’s pipes come, on request, with a CAD-3D drawing and they are all successfully tested in compliance with the most rigid international standardization directives.
With an outside rigid pipe diameter manufacture capacity that can spread from 4 to more than 300 mm, the range of personalised pipes designed by OLMARK is the natural choice of important OEMs, whose success depends on high working pressures control.
|
|
PREMANT®
Ultramodern technology for efficient production
Our pipes are available in dimensions from DN 20 to DN 1000; the types of foam insulation, medium pipes and the system for the monitoring wires can be selected freely.
Thanks to our modern production facilities, we can react rapidly to your requirements. |
|
NEW and INEXPENSIVE: Steel Tube with Stainless Steel Look
Pickhardt & Gerlach GmbH & Co KG (www.Pickhardt-Gerlach.de) has presented a product innovation on this year’s international furniture exhibition ZOW in Germany:
Steel tube with the same characteristics as a stainless steel tube in terms of look and outer corrosion protection – while offering a hefty price advantage at the same time.
The advantages:
- Identical appearance as stainless steel, no perciveable difference
- Low-maintenance surface, even better than stainless steel
- Full outer corrosion protection
- Cheaper than stainless steel
If you require further information please contact:
Pickhardt & Gerlach GmbH & Co KG
Ansprechpartner: Hendrik Knoop
Tel 02375 91 83 0
Hendrik.knoop@pgmail.de |
|
| The heating sleeve is a special physical form that can be adapted to the specifications of tubes and cartridge. Conventional dimensions as well as special shapes for one or more casks can be realised. The finished heater consist of a heated inside tube, thermal insulation and an outer jacket. Theses are available in a diverse array of high- quality materials that can be selected to match the application. The compact design with self-regulating PTC industrial heating elements or standard heaters with integrated regulation guarantee optimal functionality and the highest level of safety. |
|
PVC coated precision steel tubes in diamters between 5 and 40mm. Different material strenghts available.
Available in various colours, including metallic colours such as stainless steel and aluminium.
Lenghts up to 6000mm |
|
| FG Inox proposes its stainless steel accessories to weld : bends, tees, reducers, professional caps and collars in ISO, METRIC and ANSI (schedule) standards. |
|
Top Line Electropolished tubing sets the standard for service in applications requiring finishes to 15RA maximum. Available in sizes from 1/2" to 4" OD, this full finished stainless steel tubing is available from stock or direct from the mill in 20 foot lengths. All electropolished tubing is fully tested and marked per ASTM A450 requirements. 3
All Top line electropolished tubing is packaged using protective 6 mil poly sleeving with air tight end caps. The tubing is then packageg in wood or Tri-Wall corrugated cartons for maximum protection during shipment.
Finish: Electropolished Tubing is standard with a 15RA max ID with bright annealed/mill OD (ASME BPE surface finish code SFT4). Mechanically polished OD to 32RA or 20RA available on application. The same product is available with a 10RA max. surface finish ID.
Annealing: All tubing is Bright Annealed to a minimum of 1900 degrees F (1040° C) and rapidly quenched.
Cleaning: All Top Line electropolished tubing is rinsed with low TOC de-ionized water. The tubing is then dry purged with 99.998% pure Nitrogen which is filtered to .003 micron at the point of use. The cleaning and packaging is done in a class 100< cleanroom. |
|
316L machined stainless steel unions, threaded, with professional hose shank or to weld with flat or conical industrial seat.
From ND 5 to ND 100.
MWP at 20C: 64 professional bars < ND 50 and 40 bars > ND 50
FG Inox proposes 316L stainless steel threaded nipples, barrel or hexagon nipple, adaptors, couplings, elbows, tees, reducers and plugs. |
|
Steel tube with brass sleeve cover
Available in different finishings: polished and lacquered, chome-plated, nickel-plated, nickel-matt, browned, circular and lenghtwise professional brush
Diameters between 9 and 50mm
Material strenghts: 0,8mm
Lengths: up to 5000mm
Same premium surface as full brass tube, but with a hefty price advantage |
|
Standard profiles represent an important part of the Top Glass product line.
These profiles are available in standard dimensions and colors, and most are in stock, ready for immediate delivery. They are used for a broad variety of applications as semi-finished components in construction, electrical apparatuses, industry and urban fixtures.
A great many of these profiles find application in the production of technical equipment and sports and leisure articles. |
|
PTFE lined pipes DIN 2848/2874 DN 15 DN 600 PN 10
Standard version: 1 fixed flages, 1 lap joint flange
Carbon steel Body |
|
| Enhance performance and product life by using the material best suited to YOUR application CoorsTek Materials Professionals help you choose from a multitude of advanced ceramics and high-performance plastics like Industrial alumina, Zirconia, Silicon Carbide and others PTFE, UHMW. |
|
The current situation of water resources has led over the past decade and will soon lead to great development of new irrigation techniques joined by the common aim of saving and optimizing the use of water. In this context the use of PVC-U piping for carrying water under pressure has undergone a great increase thanks to the construction of new industrial sprinkler pipe systems for irrigation use and to the optimum quality/price ratio offered by this material. The Blu Tech Evolution pipes supplied with the prefitted Power Lock connection system in the range of diameters up to 630 mm provide an excellent solution today for designing both secondary distribution networks and for the main feed systems.
Production range: Ø 63 -800 mm |
|
BRUGG-STAMANT®
Guaranteed environmental safety
BRUGG STAMANT Safety Pipe ® is a dual pipe system prefabricated in construction units; it is especially suitable as a pipe to transport combustible or non-combustible media and gases that endanger water.
Optical and acoustic alarms are triggered in case of a leak if the pipe is used in conjunction with a leakage indicator.
Conditions and requirements
Conventional engineering of dual-wall pipe systems to transport hazardous substances must meet the highest requirements in terms of expert design and optimal technology - especially when larger dimensions are involved. As you would expect, we guarantee compliance with all conditions for fire and explosion prevention and water protection. |
|
|
|
