|
|
|
|
|
|
MULTI-THERM™ 500 is the best prefabricated, preinsulated piping system for the distribution of low to high pressure steam, high temperature hot water and general fluid transportation systems. The design eliminates corrosion and reduces energy loss.
MULTI-THERM™ 500 is the best drainable, dryable and testable, prefabricated, preinsulated piping system for the distribution of low to super heated high pressure steam, high temperature hot water and general fluid transportation systems. The outer conduit is insulated with polyurethane foam insulation and has a jacket of filament wound fiberglass or extruded HDPE jacket. MULTI-THERM™ 500 is a smooth wall, spiral welded, 10 gauge steel conduit. Single or multiple steel carrier pipes can be insulated with any type of pipe insulation. We recommend mineral wool that has passed a certified boiling test. Other options for this piping system include a Leak Detection and Location system.
- Temp Range: 250°F to 750°F (standard), above 750°F (special)
- Max Pressure: Determined by the carrier pipe selected
- Pipe Sizes: Nom. Diameter ½" - 44", Nom. Length 20' and 40'
|
|
|
|
|
|
POLYTHERM® is the best system we offer. It is a fiberglass jacketed, polyurethane foam insulated piping system for above and belowground distribution of liquids from -320°F to 250°F.
POLYTHERM® is a fiberglass jacketed, spray applied polyurethane foam insulated piping system for above and below ground distribution of liquids from -320°F to 250°F. PERMA-PIPE's multi-directional filament winding process produces a high strength fiberglass reinforced polyester resin jacket over the insulation for maximum protection from the environment. This high-strength fiberglass jacket is applied to systems having an outside diameter as large as 48 inches. Electric heat tracing is an option with this system.
POLYTHERM®'s spray insulation process assures void-free insulation. By applying insulation before the jacket is applied, complete visual inspection of the insulation is performed. This process assures void-free insulation and therefore, maximum thermal efficiency to provide optimum performance of cryogenic and heat thermal distribution systems. The POLYTHERM® system is fully engineered to job specifications, thereby reducing field costs by providing custom made, factory-fabricated fittings which reduce the number of field connections as compared to the field kit method.
- Temp Range: -320ºF to 250ºF
- Max Pressure: Determined by the carrier pipe selected
- Pipe Sizes: Nom. Diameter 1/ 2" - 36" (standard), Nom. Length 20' and 40'
|
|
POLYTHERM® is the best system we offer. It is a fiberglass jacketed, polyurethane foam insulated piping system for above and belowground distribution of liquids from -320°F to 250°F.
LO-TEMP - HI-GARD™, is a designed for the distribution of fluids aboveground at temperatures up to 250 ºF. Based on customers specifications, this is a prefabricated system with all fittings attached to straight sections.
ULTRA-NW™ is an advanced prefabricated, secondary containment piping system for hazardous chemicals, process waste and general fluid transportation. It is a fiberglass clad stainless steel conduit system with no need for cathodic protection.
|
|
|
|
|
|
ESCON-A®/ FERRO-SHIELD™ is the original prefabricated, preinsulated piping system for the distribution of low to high pressure steam, high temperature hot water, and general fluid transportation systems.
ESCON-A®/ FERRO-SHIELD™ is the original drainable, dryable and testable, prefabricated, preinsulated piping system for the distribution of low to super heated high pressure steam, high temperature hot water and general fluid transportation systems. The outer conduit is coated with our Elephant Hide urethane coating which provides an outstanding corrosion resistant covering. ESCON-A®/ FERRO-SHIELD™ is a smooth wall, spiral welded, 10 gauge steel conduit. Single or multiple steel carrier pipes can be insulated with any type of pipe insulation, but we recommend mineral wool that has passed a certified boiling test. Other options for this piping system include a Leak Detection and Location system, or Cathodic Protection (optional).
- Temp Range: 250°F to 750°F (standard), above 750°F (special)
- Max Pressure: Determined by the carrier pipe selected
- Pipe Sizes: Nom. Diameter ½" - 44", Nom. Length 20' and 40'
|
|
|
|
|
|
ULTRA-HT™ is an advanced preinsulated secondary containment piping system for general fluid transportation that requires an insulated steel containment. No need for cathodic protection.
ULTRA-HT™ is the designed for maintaining fluid temperature while containing hazardous fluids. This system complies with Federal regulations for secondary containment of hazardous fluids, that require insulation to maintain their temperature. Drainable, dryable and testable, prefabricated this secondary contained piping system is designed for the distribution of jet fuel, radioactive waste, bio-process waste and chemical transfer. ULTRA-HT™ can be used for above and below grade systems, with no need for cathodic protection. The outer conduit is clad with our filament wound fiberglass cladding .100 mils thick and designed to withstand a 35,000 volt holiday test. ULTRA-HT™ is supplied with stainless or other high alloy pipe and containment. Single or multiple steel carrier pipes can be insulated with any type of pipe insulation. We recommend mineral wool that has passed a certified boiling test. Other options for this piping system include a PermAlert Leak Detection and Location system and electric heat tracing.
- Temp Range: 32ºF to 750ºF
- Max Pressure: Determined by the carrier pipe selected
- Pipe Sizes: Nom. Diameter ½" - 44", Nom. Length 20' and 40'
|
|
|
This heat transport pipe consists of an inner pipe with a layer of thermal insulating material, and a reinforcing layer formed around the inner pipe. Responding to the need for transporting heated mediums such as steam, and heated or chilled water, this product has been developed and is contributing to the efficient use of energy. For example, heat transport pipes have been installed in area-wide air conditioning systems and other facilities that utilize excess and waste heat or geothermal energy.
|
|
PREMANT®
Ultramodern technology for efficient production
Our pipes are available in dimensions from DN 20 to DN 1000; the types of foam insulation, medium pipes and the system for the monitoring wires can be selected freely.
Thanks to our modern production facilities, we can react rapidly to your requirements.
|
|
MJ - Metal Tube Jacketed (Single Metal Tube)
Copper Tubes:
1/4” OD x .030” Wall
3/8” OD x .032” Wall
1/2” OD x .035” Wall
Welded Stainless Steel Tube:
1/4” OD x .035” Wall
3/8” OD x .035” Wall
1/2” OD x .035” Wall
|
|
| ... products without technical information |
| |
For use at high temperatures
CASAFLEX® is a flexible, self-compensating, endless production, monitorable and heat-insulated pipe system with a special steel medium pipe.
Operational data
Excellent heat insulation at high temperatures
The diffusion barrier and the structure of the CASAFLEX® pipe system guarantee minimal heat losses as well as resistance to high temperatures. Operational temperatures up to 160 °C, peak temperatures up to 180 °C, PN 16/25, DN 20-50.
|
|
Developed for the low-temperature range
CALPEX® is a flexible, self-compensating, continuous and heat-insulated pipe system with a medium pipe made of cross-linked polyethylene.
No underground connections
CALPEX® district heating pipes can be supplied in rings of up to 807 m in one piece, depending on the dimensions. This largely eliminates underground connection points.
Area of application:
Heat supply pipes, drinking water transportation, drainage/waste water systems, cooling plants, swimming bath technology and agricultural applications are just a few examples from our extensive list of references.
|
|
| ... products without technical information |
| |
... see all the products in the category
Hoses
|
|
|
