|
|
Giem electric resistances have been studied and manufactured with a special technology that gives the maximum duty reliability. Many versions are available to meet various applications requirements:
1. tangential heaters for all possible applications in the tangential thermal ventilation field;
2. axial heaters of circular shape for a perfect heat distribution;
3. quartz tube resistances with ceramic insulating support for applications in ovens and radiators.
|
|
Applications:
heating or het-loss free transport of: oil, grease, wax, resin, tar, paint, water, carbon dioxide, plastics, sealants, etc...
Emplyable pressurised hoses of PTFE from DN 4 to 50 mm; pressure train depending on nominal width up to 600bar.
|
|
Heater Hose
Characteristics of Flexfab's silicone heater hose...
Continuous operating temperature -65°F (-54°C) to +300°F (+150°C). Nylon fiber reinforced. Resistant to coolant additives. Flexfab silicone heater hose is shipped on wooden reels or handy dispenser cartons containing 25' or 50' of hose. For high temperature applications, Nomex® reinforcement is available.
|
|
|
The heating sleeve is a special physical form that can be adapted to the specifications of tubes and cartridge. Conventional dimensions as well as special shapes for one or more casks can be realised. The finished heater consist of a heated inside tube, thermal insulation and an outer jacket. Theses are available in a diverse array of high- quality materials that can be selected to match the application. The compact design with self-regulating PTC heating elements or standard heaters with integrated regulation guarantee optimal functionality and the highest level of safety.
|
|
STEREO-HEAT® Impedance Heat Tracing is a direct current electric traced system across the ends of a steel or alloy pipeline section that provides even heat distribution on short to medium runs of preinsulated pipe.
STEREO-HEAT® Impedance Heat Tracing is based on the application of AC voltage across the ends of an insulated pipeline section on short and medium runs of pipe causing a current flow in the pipe walls that generates heat. This is an engineered custom designed system within ANSI/IEEE 844, NEC 426,427 and your specification requirements. This system can be retrofitted onto an existing pipe system or as part of a preinsulated PERMA-PIPE® system. Applications such as liquid food products, oil, asphalt, resins, napthalene, Urea, food oils are just a few systems that utilize STEREO-HEAT® tracing.
|
|
PTC-Heating Technology
PTC heating elements can be advantageously used for many types of heating due to their special resistance temperature characteristics. The equipment which is normally necessary for the regulation of temperature and the securing from overheating can be done without.
The used capacity PTC have an extremely positive run of the electrical resistance depending on the temperature. Therefore also the name PTC (Positive Temperature Coefficient).
|
|
HEATING CABLES - HC3/EX-HC3 - for industries and hazardous areas.
Thermo Heating Cable HC3 are the hardy and tough heating cable. When the ambient runs low, strap our workhorse heating cable and keep the fluid flow.
Heating Cable HC3 maintains temperatures in pipelines and storage tanks to keep fluids in flow state. They are the ideal for process heating requirements in Oil & Gas, Petrochemical, Power, Chemicals & Fertilizers, Metallurgical, Cement, Pharma, Food and Edible oil industries.
Construction
Heating Cable HC3 is a series type heating cable with single conductor (multistrand, spiraled) heating element with a primary PTFE (Teflon) insulation, metal braid and an outer PTFE sheath. Each length of heating cable HC3 requires termination kits with cold lead for power connection.
|
|
CH-Constant Watt High Temperature Maintenance Electric Trace Bundles
Maintain Temperatures up to 400˚F (204˚C)
Process Tubes 1/4” to 1/2” O.D. (6mm to 12mm) - Single or Dual Tube Designs
Applications:
Analyzer, impulse and instrument lines; small diameter process lines, stack gas sampling lines; and utility lines.
|
|
HEATED HOSES - for gas and liquid transfer.
During Gas Analyzer Sampling, Hot Melt Transfer, Petroleum or Chemical Transfers, or Food Processing, it is needed to maintain critical temperatures, to avoid condensation of gas or drop in fluid temperature. Thermo Heated Hoses aptly cater to this need, by ensuring that the fluid in the process tube (part of the heated hose), looses no heat.
These flexible and lightweight tubes can withstand aggressive high pressure fluids and high temperatures involved in transfer of fluids.
Construction
Heated Hose comprises of a process tube bundled with insulated electrical heating element and wrapped with a heat reflecting foil. Temperature sensor is provided at about 300 mm from power connection end. This bundle is insulated and provided with an outer jacket. Ends are sealed suitably and electrical connections for both power and control are brought out.
|
|
Standard heating covers 1m², 2m² and 4m²
Flexible heating pannel with one heating face (red face) and one insulated face (blue face) ; standard square output is 400W/m².
Standard flexible heating pannels are equipped with eyelets to be laid easily.
Available in 3 different sizes: 1m², 2m² et 4m².
Precise temperature when regulating with a thermostat
Easy to store
Quick laying
|
|
In ECAS we manufacture heating blankets and heating bands, for the control and maintenance of the temperature of drums and containers.
Models BFVFV and BFVIBC: Consists on an electric flexible resistance placed in a blanket or band, manufactured with fabric of glass fiber.
All our heating blankets and bands, controls and regulates the temperature with a thermostat recommended due the requirements of each project.
We manufacture blankets and bands for drums from 25 to 200 litres, and containers IBC of 1000 litres, but we also fabricate custom blankets.
Drums: of 200,100, 50 and 25 Litres
IBC container: 1.000 Litres
Power (W):
Drums 200 L: 750 W, 1.000 W, 1.500 W
Drums 100 L: 750 W
Drums 50 L: 300 W
Drums 25 L: 200 W
IBC Container of 1.000 L: 2.000 W
Range temperature: 0 - 80 ºC
Types of fasteners: Velcro. Plastic buckles or clasps, Grommets
Application
Heating of drums, storage tanks, Instrumental of laboratory, etc.
|
|
Applications:
Heating or temperature regulation of large surfaces and containers up to 60°C, e.g. IBC containers, silos, lorries.
The heater tarp is warmed with electric heater elements sealed in coated polyester fabric. The tarp's surface is washable and spray waterproof. It can optionally be ordered with a 5 mm thick layer of thermal insulation.
|
|
| ... products without technical information |
| |
|
|
