The electric heating range is based on two product lines: electric fan-coils ...
- Performance up to 95%.
- Big airflow fan to reach the temperature of comfort in very short time.
- Pellets burner of high ...
Industrial biomass heaters - BIO MANN
DESCRIPTION:
MET MANN has achieved key objectives in the development of BIO MANN autonomous industrial heaters , that are as follows:
- Reduction of energy consumption ...
Everywhere where electrical resistance heating is not possible or too extensive but optimum heat distribution at lowest emission is required you can find SUNSRAYS® infrared gas burners in use. Using ...
• Available in output ratings of 2400 kcal
• ...
Specifications:
Firing rates - up to 220 kW (750, 000 BTU/h) per 12 inch (305 mm) burner length
Process air velocity range 7.5 to 18 m/s (1500 to 3500 ft/min)
Differential air pressure range 0.5 to 3.0 mbar (0.2 to 1.2 in w. G). (across the burner)
Turndown: ...
Heating sleeves to heat segments of 200 litre barrels per DIN. both the inner and the outer sheath of the barrel heating sleeve are made of aluminium sheet, which ensures maximum protection of the electrical components against mechanical damage. A hinge with campling closure that divides ...
Robust heater tarps for large surfaces
Applications:
Heating or temperature regulation of large surfaces and containers
up to 60 °C, e.g. IBC containers, silos, lorries.
The heater tarp is warmed with electric ...
These can be fabricated for use in warming tables, cabinet heaters,
cooling tables, heating plates for form carriers or even radiating
heaters ...
The Caloritech™ EXC High Density Circulation Heater with Copper Sheath is essentially a flange heater mounted in a welded vessel and is used primarily to heat water or other aqueous solutions that are not corrosive to the steel vessel or the copper sheathed elements.
Features & Benefits At A Glance
...
The Caloritech™ WXS Gate Body Duct Heater is custom engineered to heat the inside of a gate and prevent ice build-up on gate walls, windseals and end members. It can be connected to a duct having various elevations within ...
The Ruffneck™ FE2 heaters are CE Marked & ATEX Approved to Directive 94/9/EC for use in hazardous locations. They are designed for dry indoor industrial applications such as oil refineries, petrochemical plants, pulp and paper mills, hazardous waste storage facilities, wastewater treatment plants, etc., where specific ...
Applications
The 55 gallon drum heater is designed to:
Freeze protection
Warming up and ...
B50 gas bottle wrap on heater is a flexible and watertight heating panel coated with 2 plastic fabrics : an heating red face and an insulated blue face.
This gas bottle heater is able to warm up and maintain gas bottle up to 45°C max temperature, by compensating the bottle cooling down due to gas expansion, and thus to avoid the ...
Applications
1000 litre IBC heater is a flexible heating panel designed to:
...
In ECAS we manufacture heating blankets and heating bands, for the control and maintenance of the temperature of drums and containers.
Models BFVFV and BFVIBC: Consists on an electric flexible resistance placed in a blanket or band, manufactured ...
IBC drum heating:
The main purpose of a drum heating system is to compensate for heat loss undergone by certain fluids during production processes.
It is essential that the fluid in the drum does not freeze or suffer ...
At ECAS, we are expert manufacturers of crankcase heaters.
The BCC it's an electricserial resistance protected with a ...
Original design ensuring optimum heat transfer with no ...
The economical and reliable solution for a constant spraying quality to reduce the viscosity of paints without adding solvents.
The heating of the product is done ...
The blasting air is heated to approximately 70°C using the compressed air heater. This ...
UPK® is a continuous cooling or heating screw conveyor for bulks, powders, granulates, pasty or muddy products. The cooling and heating function is accomplished ...
NH-4 Heater
Nordson® heated airless and air spray systems utilise the Nordson® Model NH-4 fluid heater to reduce the viscosity of coating materials and increase operating efficiency without adding solvents.
The NH-4 heater is an electrically ...
HIBC/B Heater Jacket:
* Teflon/Polyester Jacket
* Dual power circuits
* Thermally insulated
* Adjustable quick release buckles
* 0-40c or 0-90c Thermostat
* Bespoke sizes to order
* 3 Metre power cable
* Double insulation IP40
* Ex-Stock
Size: 1000mm ...
Advantages
Holroyd cartridge heaters are designed to provide localised heat to work areas requiring close thermal control up to a maximum temperature of 750°C. The cartridge diameter is fractionally undersize to ensure a close fit and excellent heat transfer when inserted into a standard ...
Advantages
Polyester is a transparent, flexible, thin material, ideally suited for the manufacture of etch foil heater mats in the lower temperature ranges. With its low thermal mass, superb electrical insulating properties and excellent resistance to most ...
Insulated Flexible Heating jackets for containers and drums from 20 litres up to 1200 litres in size.
High grade insulation combined with a range of custom coated fabrics allow us to offer a performance specification ...
LMK Thermosafe manufacture a range of high specification flexible heating ...
The InteliHeat flexible heating jacket for IBC's and totes is ATEX and IECEx certified for use in potentially explosive atmospheres.
Constructed with patented technology using carbon rich semi-conducting heating membranes, safe ...
The radiant strips heating system OHA are apt to heat medium and/or large industrial, commercial and sport buildings, using either gas or diesel oil.
An OHA is composed by an combustion group, which is installed outdoor, and by emitting tubes. The tubes, hanged on the ceiling of the building, constitute ...
OHA RHE with inverter (patented)
The evolution of the radiant heating
OHA RHE "Radiant High Efficiency", with modulation and inverter, represents the technological evolution of OHA combustion group.
The regulation of the modulated thermal power is controlled by the inverter, which adjusts the capacity of the fume fan according to several parameters, such as fume ...
AIR BREEZE is the internal air heater with captivating design which makes it pleasant and adaptable for any kind of industrial and commercial environment.
The finned front part has a particular design, realized to have a better air flow in the upper ...
High Temperature Air Heaters
High temperature Air Heaters are designed to operate at high temperatures up to 750°C. They are similar in construction to the low temperature units except the units would be manufactured in stainless steel and the terminal enclosure could be stood off the heater body for ventilation purposes.
Where required the Air Heater can be seam ...
Mica heaters form the core of most general machine heating applications as they are inexpensive and infinitely variable in shape and concept.
LPC engineers pride themselves on their ability to provide solutions for the most complex shaped dies and heating applications. Variations manufactured by LPC include round, half round, segment, ...
Flanged Immersion Heaters consist of tubular elements formed into a hairpin and mounted into a metal flange. A terminal enclosure is fitted which contains the electrical connections and control thermostats. The tubular elements can be brazed, welded or fitted mechanically to the flange.
The whole unit is then ...
