Suction pumps

Flow: 0.1 l/min - 8 l/min
Power: 7 W

... material - PP Diaphragm material - EPDM,FKM Connection port - 4mm inner diameter silicone tube Pressure range - Output≥200KPa,suction≤-80KPa Rated voltage(DC) - 12V,24V Medium - Water, weak acids and alkalis etc Lifetime ...

Flow: 0.1 l/min - 8 l/min
Power: 15 W

... material - PP Diaphragm material - EPDM Connection port - 4mm inner diameter silicone tube Pressure range - Output≥200KPa，suction≤-60KPa Rated voltage(DC) - 12V/24V Medium - Water, weak acids and alkalis etc Lifetime ...

Flow: 0.1 l/min - 8 l/min
Power: 14 kW

... material - PP Diaphragm material - EPDM Connection port - 4mm inner diameter silicone tube Pressure range - Output≥130KPa，suction≤-70KPa Lifetime - 3000hrs（Brush motor） Safety protection current(A) - NA Rated current ...

Flow: 4 l/h - 1,020 l/h
Pressure: 0 bar - 16 bar
Fluid temperature: 5 °C - 80 °C

... optocoupler output (stroke feedback). The pump is fitted with a 0 – 20 mA analogue output. The MEMDOS LA is compatible with all conventional control systems. The pump is also fitted ...

Flow: 1,500 l/s
Pressure: 30 bar
Head: 150 m

The high-performance pump for homogeneous liquids containing high concentrations of solids and high gas contents. Different impellers for large and small particle sizes. Applications - Demanding fluids ...

Flow: 0 l/s - 1,500 l/s
Pressure: 45, 100 bar
Head: 0 m - 150 m

... reactor pump developed for high temperature and high pressure applications in the chemical and petrochemical industries. Since many years a reference to handle multiphase liquids such as chemical mixtures with high gas ...

Flow: 8, 12, 18, 4 m³/h
Pressure: 5, 6, 9 bar
Fluid temperature: 100, 160 °C

... Disc Pumps have been specifically designed for air-sensitive and shear-sensitive products. They feature a unique seal-less design with a double stainless-steel bellows that ensures durability, safety and product containment. ...

Flow: 1 m³/h - 45 m³/h
Pressure: 16, 6, 9 bar
Length: 460 mm - 906 mm

... durability, safety and product containment. The result is a pump that delivers very high suction and discharge pressures that allow it to self-prime and fully maximize product containment. SLC Series ...

Flow: 6.5 m³/h - 70 m³/h
Pressure: 10, 7 bar
Fluid temperature: 100 °C

Mouvex® G-FLO Seal-Less Eccentric Disc Pumps are designed to provide premium performance and the ultimate in full containment and safety in chemical-processing and industrial applications, delivering high suction ...

Flow: 4 m³/h - 17 m³/h
Pressure: 5 bar - 15 bar
Power: 7 kW - 11 kW

HIGH PRESSURE (ALH) PERISTALTIC HOSE PUMP - ALBIN PUMP - Volumetric flow between 8 to 17 m3/h (35-75 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive ...

Flow: 21 m³/h - 54 m³/h
Pressure: 1 bar - 15 bar
Power: 15 kW - 22 kW

HIGH PRESSURE (ALH) PERISTALTIC PUMP - ALBIN PUMP - Volumetric flow up to 54 m3/h (238 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive or viscous ...

Flow: 1.7 m³/s - 17.1 m³/s
Pressure: 7.6, 6.9, 3.4, 4.5 bar
Power: 0.18 kW

PERISTALTIC METERING PUMP (KM2) - ALBIN PUMP Specifications: Flow rate: up to 65 l/h (17 gph) Discharge pressure: up to 7.6 bar (110 psi) Turndown ratio: 10,000:1 Maximum suction lift: ...

Flow: 0 m³/h - 1,500 m³/h
Pressure: 0 bar - 25 bar
Head: 0 m - 160 m

... centrifugal pump to EN 733 (DIN 24255) Standardized and modular design Compact design Flanges according to ISO 7005 PN 16 Many mounting options (floor, bulkhead, wall mounting) ...

Flow: 500 m³/h
Pressure: 10 bar
Head: 35 m

In-line circulating pump with dry, electric motor shaft and mechanical seal to EN 12756 (DIN 24690) Compact, economic, space saving construction Wide range of applications Outstanding hydraulic performance ...

Flow: 0 m³/h - 1,500 m³/h
Pressure: 0 bar - 10 bar
Head: 0 m - 140 m

Horizontal centrifugal pump to EN 733 (DIN 24255) Standardized and modular design Flanges according to ISO 7005 PN 16 Outstanding hydraulic performance High efficiency impeller Closed impeller ...

Flow: 0 m³/h - 250 m³/h
Pressure: 0.8, 0.5, 16 bar
Fluid temperature: 250 °C

The HD gear pump are specifically designed for difficult applications Heavy Duty - Internal gear pumps in cast iron, for a wide range of viscous, non-corrosive liquids. HD pumps ...

Flow: 0 m³/h - 250 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 250 °C

Internal gear pump designed to handle corrosive liquids ROTAN® CD - Chemical Duty. Internal gear pumps in stainless steel, designed to handle corrosive liquids. CD pumps are designed ...

Flow: 50 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 150 °C

Simple and compact construction for non-abrasive liquids General Purpose Internal gear pumps in cast iron, for clean, non-abrasive liquids. The simple and compact construction makes ...

Flow: 4.8 m³/h
Head: 9 m
Power: 0.18 kW

... mechanical seal allows a small footprint. Excellent wear resistance Ultra-durable carbide/carbide insert Excellent performance Closed centrifugal impeller coupled to a bladed diffuser. Self-priming Excentric ...

Flow: 31.5 m³/h
Power: 2.2 kW
Fluid temperature: 110, 80 °C

... mechanical seal allows a small footprint. Excellent wear resistance Ultra-durable carbide/carbide insert Excellent performance Closed centrifugal impeller coupled to a bladed diffuser. Self-priming Excentric ...

Flow: 52 m³/h
Power: 5,500 W
Fluid temperature: 110 °C

... mechanical seal allows a small footprint. Excellent wear resistance Ultra-durable carbide/carbide insert Excellent performance Closed centrifugal impeller coupled to a bladed diffuser. Self-priming Excentric ...

Flow: 200 l/min
Pressure: 1.5 bar - 7 bar
Head: 5 m - 8 m

... Series 1” PVDF Air-operated double diaphragm (AODD) pumps are available in an extensive range of diaphragms, seats and balls. They offer a wide range of applications and fluid compatibility. These pumps ...

Flow: 54 l/min
Pressure: 1.5 bar - 8 bar
Head: 5 m

... of applications and fluid compatibility. These pumps have increased resistance to corrosive fluids, harsh atmospheres, high tensile, and aggressive temperatures. UP05 ½” Stainless Steel AODD pump ...

Flow: 1,000 l/min
Pressure: 1.5 bar - 8 bar
Head: 6 m - 8 m

... advantages of our PIVOT Series AODD pumps are: • - Air motor with exclusive frictionless pivot-shaft air valve resulting in: o - Larger flow delivery o - Smooth pump operation o - Reduced flow ...

Flow: 0 us gal/min - 990 us gal/min
Pressure: 0 psi - 350 psi
Fluid temperature: 14 °F - 212 °F

Compact C Pump delivers reliable performance to the maximum duty requirements of your application in a compact package. Features include suction lift capability up to ...

Flow: 0 us gal/min - 4,500 us gal/min
Pressure: 0 psi - 1,500 psi
Fluid temperature: 14 °F - 230 °F

... changing pump arrangement to match the width of the TSF opening to the drop zone • Concentric rotation in a close tolerance pressure tube allows the TSF to generate positive stuffing pressure to the pump ...

Flow: 0 us gal/min - 200 us gal/min
Pressure: 0 psi - 225 psi
Fluid temperature: 14 °F - 350 °F

For nearly 50 years, versatile L-Frame pumps have stood the test of time meeting thousands of application challenges with performance-enhancing, cost-saving features. Features • Low total cost of ownership • Simple ...

Flow: 900 l/min
Head: 12, 27, 40 m
Power: 5 kW - 12.6 kW

Immersion Pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being immersed in the ...

Flow: 0 l/min - 870 l/min
Head: 0 m - 62 m
Power: 3.3 kW - 10.3 kW

Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps ...

Flow: 16.2 l/min - 47.4 l/min
Pressure: 10 bar - 200 bar
Power: 0.7 kW - 12.5 kW

Screw spindle pumps with their silicon carbide spindle housing and highly wear resistant spindles are capable of achieving extremely high pressures. Brinkmann high pressure screw pumps are designed for ...

Flow: 40, 60 l/min
Head: 38, 58 m
Power: 0.37, 0.6 kW

... water di stribution by small autoclave tanks or by hydrosphere units. For the correct functioning of the pump, use clean water, or non-agressive liquids only, without sand or other solid impurities. LIMITS ...

Flow: 125, 100 l/min
Head: 29, 20, 27 m
Power: 0.75, 0.55, 0.37 kW

Single impeller centrifugal pumps suitable to cover any small, medium or large capacity request; for domestic, agricultural and industrial purposes; with automatic water distribution through small and ...

Flow: 125 l/min - 150 l/min
Head: 36 m - 54 m
Power: 1.1 kW - 2.2 kW

Single impeller centrifugal pumps suitable to cover any small, medium or large capacity request; for domestic, agricultural and industrial purposes; with automatic water distribution through small and ...

Flow: 0.005 l/min - 0.06 l/min
Input diameter: 1, 2, 2.5, 3 mm
Output diameter: 3, 4, 4.5, 5 mm

... The pump tube adopts imported BPT (B) tube and silicone tube (S), which can be applied to different transmission liquid requirements Pump tube size is optional (04#, 06#, 08#) peristaltic pump ...

Flow: 0.01 l/min - 0.9 l/min
Head: 2 m
Fluid temperature: 0 °C - 40 °C

Basic parameters： Tube: PharMed BPT or Silicone tube Pulse: 3 rollers, moderate pulse Pump Head: POM material Applications： Laboratory，Environmental protection，Printing&Packaging，Aquarium， Smart Home，Instruments ...

Flow: 0 l/min - 0.45 l/min
Pressure: 0.01, 0.5 MPa
Power: 20 W

... stepper motor. Lightweight and compact, unlimited installation scenarios. Small in size, only 10.5cm in length, suitable for many scenes. Stepper motor, Long life 5000H, Suction stroke ≥0.5M (Data ...

Flow: 4.5 l/min
Pressure: 130,000 Pa
Input diameter: 4.9, 2.8 mm

Mini Diaphragm Vaccum Pump TM30B-H Motor Type:Brushless DC motor Max flow rate:4.5L/min Max pressure:130Kpa, Max vacuum: 65Kpa Voltage:6V/12V /24V Ideal Life Time:10000 Hours Working Mode:Continuous ...

Flow: 0 l/min - 3 l/min
Head: 6 m
Weight: 900 g

Mini Diaphragm Liquid Pump TF51-C Motor Type:Brushless DC motor Max flow rate:3L/Min Water lift:6M Voltage:12V 24V Ideal Life Time:10000 Hours Functions:Can dry-running, Self-priming ■ Overview ...

Flow: 0.35, 4.5 l/min
Pressure: 0 Pa - 60,000 Pa
Head: 10 m

TF30B-H Micro Diaphragm Liquid Pump Motor Type:Brushless DC motor Max flow rate:water:0.35L/Min, gas:4.5L/Min Water lift:≥10M , Max vacuum: 60Kpa Voltage:12V/24V Ideal Life Time:10000 Hours Pump ...

Flow: 0 m³/h - 275 m³/h
Pressure: 8 bar
Head: 0 m - 90 m

K2 series comprises long vertical sump pumps with external electric motor and baseplate available in 3 sizes. Process sump pumps for aggressive liquids 3 versions according to the performance and ...

Flow: 2 m³/h - 50 m³/h
Pressure: 8 bar
Head: 0 m - 40 m

... bottom and outlet pipe at the top. These pumping solutions ensure a longer life cycle and less maintenance operations. Compact sump pumps HME version: cantilever shaft with column length: 274mm or ...

Flow: 0 l/min - 40 l/min
Pressure: 8 bar
Head: 0 m - 25 m

... self-priming technology Reversible (the flow direction of rotation) Start-up with empty pipes Very fast priming phase Extended suction lift capability (up to -5m) 3 motor executions according to the liquid specific ...

Flow: 3,200 m³/h
Pressure: 90 bar
Head: 480 m

... Available with permanent magnetic drive: SCE-M Pump CHARACTERISTICS Radially split, centerline supported, single stage centrifugal pump Single or double volute depending on size Single suction, ...

Flow: 250 us gal/min - 5,000 us gal/min
Pressure: 40 psi - 519 psi

... impeller to pump shaft Suction bowl that provides rigid support of the lower end of the pump shaft Strainer to prevent entry of foreign objets into pump suction Diesel ...

Flow: 2,886 m³/h
Pressure: 26 bar
Head: 235 m

... stage, end suction, centrifugal pump that works around a basic hydraulic and mechanical concept to guarantee its efficiency across a broad range of operating conditions, application flexibility and interchangeability. Overview The ...

Flow: 21, 120 l/min
Pressure: 7 bar
Weight: 18 kg

Professional pneumatic pumps for low pressure finishing spray, assembled and tested to reach all sector applications needs: they guarantee high performance and a long cycle of use. The powerful low pressure spray units, ...

Flow: 21, 120 l/min
Pressure: 7 bar
Weight: 18 kg

Professional pneumatic pumps for low pressure finishing spray, assembled and tested to reach all sector applications needs: they guarantee high performance and a long cycle of use. The powerful low pressure spray units, ...

Flow: 21, 120 l/min
Pressure: 7 bar
Weight: 12 kg

rofessional pneumatic pumps for low pressure finishing spray, assembled and tested to reach all sector applications needs: they guarantee high performance and a long cycle of use. The powerful low pressure spray units, ...

Flow: 14 l/min

... with reusable pumps that the liquid being transferred will be contaminated by the pump, especially if the pump is used for different media or containers and it is not properly cleaned ...

Flow: 9 l/min

The Siphon with stopcock from Burke is equipped with a transparent hose that allows users to monitor the medium within the model. This combination is capable of completely emptying a container with the condition that the liquid is primed ...

Flow: 0 us gal/min - 5 us gal/min
Length: 191 mm
Width: 139 mm

... AODD) pump. Engineered with original equipment manufacturers (OEMs) in mind, this AODD pump provides tremendous system flexibility as well as: Dual-threaded manifolds that are threaded both internally ...

Flow: 0 us gal/min - 123 us gal/min
Length: 471 mm
Width: 310.29 mm

... excellent flow rates. The Versamatic 1 ½" pump is the performance leader in flow rate at 123 gpm (465 lpm), displacement per cycle and dry suction lift. Additionally, this pump: ...

Flow: 0 us gal/min - 170 us gal/min
Pressure: 7 bar
Length: 742, 754 mm

... clog other pumps, this unique pump has been engineered to fully function in any position. This plastic solids handling AODD pump is also configured to provide a longer service life ...

Flow: 112 m³/h - 10,800 m³/h
Head: 8.5 m - 140 m

Series HFXS pumps are a kind of wear resistance single-stage double-suction centrifugal pumps with horizontal split-case. And it is our new products for delivering the liquid containing ...