Clamping range: 0.38 mm - 24 mm
... Impact-resistant key-type drill chuck with key. Conical/threaded mount in acc. with DIN ISO 10887 (toothing in acc. with DIN 6349). For clockwise and counterclockwise rotation. Physical characteristics Hardened keyholes and clamping ...
RÖHM GmbH
... • Self-tightening flat jaw drill chuck. • Industrial design with maximum precision. Physical characteristics • Strong retaining ring • All components made from steel • Hardened and superfinished • Only suitable for clockwise ...
RÖHM GmbH
Clamping range: 0 mm - 16 mm
... Self-tightening flat jaw drill chuck. Physical characteristics • Strong retaining ring • All components made from steel • Hardened and superfinished • Only suitable for clockwise rotation Application area Suitable for stationary ...
RÖHM GmbH
Clamping range: 1 mm - 56 mm
... Available in 3 sizes Clamping jaws can be used on both sides Clamping range Ø 32 mm: - on the inner diameter of the component: 11 - 23 mm - on the outer diameter of the component: 1 - 32 mm Clamping range Ø 44 mm: - on the inner diameter of ...
Clamping range: 20 mm
... High-precison Toolholder Provide high-precison and good balance characteristics. Clamping force is evenly distributed along the entire tool shank to improve rigidity and surface finish Black oxide finish for antirust Type of taper shank: JIS B6339-AD Internal ...
Nagoya Precision Tools
Clamping range: 25, 32, 20 mm
... High-precison Toolholder Provide high-precison and good balance characteristics. Clamping force is evenly distributed along the entire tool shank to improve rigidity and surface finish Black oxide finish for antirust Type of taper shank: JIS B6339-AD Internal ...
Nagoya Precision Tools
Clamping range: 20, 25, 32, 42 mm
... High-precison Toolholder Provide high-precison and good balance characteristics. Clamping force is evenly distributed along the entire tool shank to improve rigidity and surface finish Black oxide finish for antirust Type of taper shank: JIS B6339-AD Internal ...
Nagoya Precision Tools
The cutting quality can get affected due to the applicability and precision of the glass cutter. It is mainly used for saisfying the needs of glass cutting machines. Holders with different applicability are discovered from time to time, like holders for ...
... The Feature of HDXL Holder The holder is made of zinc-aluminum alloy. Compared with the traditional plastic holder, the zinc-aluminum alloy holder has the characteristics of high hardness, wear resistance, good cutting stability and stable cutting quality. ...
... Grinding wheel flange support manufacturing Customized dimensions ...
SASSATELLI
... Customized dimensions To request a product with customized dimensions, contact the sales department. ...
SASSATELLI
... FIL MAS SF The thread cutting devices of series FIL MAS SF can be perfectly used on lathes of any dimension having the accessories for radial sliding on balls. A perfect working is obtained eliminating imperfections caused by forced pull. FIL MAS SF ...
SASSATELLI
... Insert Holders for pipe beveling reduce investment TiN Duplex Provide perfect operation Corrosion Protected Highest Quality Made in Germany Our insert holders for pipe beveling are manufactured from high quality premium tool steels with approved ...
DWT GmbH
Clamping range: 5 mm - 45 mm
... Perfect Weld Preparation Rigid Holder Corrossion Protected Highest Quality Made in Germany For the preparation of pipes, several tools are available. Following standard tool holders are available for this machine: Tool holder 0° with tool ...
DWT GmbH
Clamping range: 30 mm - 88.9 mm
... Perfect Weld Preparation Rigid Holder Corrosion Protected Highest Quality Made in Germany ...
DWT GmbH
Clamping range: 315 mm
... Overview
3-jaw self-centering scroll
chuck made of steel. Precision class. Type C mounting (DIN 55027). Through-hole present. Size: 315 mm.
More Information
Sku USA: 7-828-1256P
Promo: No
Size: 315 mm
Product ...
Bison S.A.
Clamping range: 315 mm
... Through-hole: Yes
Technical specifications
- Product: 3-jaw self-centering scroll chuck
- Material:
Bison S.A.
Clamping range: 315 mm
... Overview
3-jaw self-centering scroll
chuck manufactured in steel, size 315, Type C mounting (DIN 55027), taper 6. Designed for concentric clamping of cylindrical workpieces on turning machines.
Key product information
Bison S.A.
Clamping range: 80 mm - 400 mm
... Precision spiral ring chuck made of steel with cylindrical centering according to DIN 6350. The chuck enables uniform clamping force by centric clamping jaws as well as high runout accuracy. Three-jaw chucks ...
Spreitzer GmbH & Co. KG - Präzisionswerkzeuge
Clamping range: 115 mm - 210 mm
... Pneumatic or hydraulic three-jaw chucks for individual mounting on the machine table or for workpiece automation. Advantages at a glance Design: Stainless cylinders, dust and splashproof Material: steel Finish: hardened and ...
Spreitzer GmbH & Co. KG - Präzisionswerkzeuge
Clamping range: 80 mm - 162 mm
... Mechanical manual chucks with high precision, holding force and rigidity for use on machining centers, prototyping and metrology. The version SK -2 provides, due to the optimized force transmission in both axial directions, maximum flexibility. Advantages ...
Spreitzer GmbH & Co. KG - Präzisionswerkzeuge
Clamping range: 1 mm - 32 mm
Rotational speed: 20,000, 25,000, 40,000 rpm
... holder table
HSK-A Collet
Chuck | HSK-A40 | ER 16 - ER 32 | Cutter Ø 1.0 - 20.0 mm | Combined runout ≤ 5 µm | Dim. precision ≤ 2 µm; Cylindricity ≤ 1 µm; wear-resistant stainless steel options
HSK-A Collet
Chuck ...
Clamping range: 1 mm - 30 mm
Rotational speed: 30,000, 15,000, 18,000 rpm
... Main features
BT Collet
Chuck | BT30 | ER | ER 8 - ER 32 | 1.0 - 20.0 | ≤ 5 | Ultra precise taper hole; Dimensional precision ≤ 2 µm; Cylindricity ≤ 1 µm; Customized, extra wear resistant stainless steel
BT Collet
Chuck ...
Clamping range: 1 mm - 20 mm
Rotational speed: 40,000 rpm
... [mm] | Main features
ISO Collet
Chuck | ISO10 | 24 | ER | ER11 | 1.0 - 7.0 | ≤ 5 | Shank run-out accuracy ≤ 2 µm; Dynamic balancing grade ≤ G1; Customized, extra wear resistant stainless steel
ISO Collet
Chuck ...
... The machining of a recess, which was largest compared with the entry hole, was made possible with this special tool developed especially for this purpose. In this case the special solution was the only way to get the target (recess turning). Therefore ...
This special spindle developed in C.R.M. Mazzoccato reduces the required number of tools and the global processing time (through less set-up). Applying polycrystalline diamond reduces also the cost per part of tooling in production, guarantees precision ...
... In the production of high precision small metal parts, it is often problematic to carry out equally high precision cutting operations on automatic lathes. The tools and inserts that we have developed to solve this problem are able to guarantee optimal ...
... Bushes with clutch for tapping machines M2 to M30 Bushes with quick-connect clutch allow tapping on blind and through holes. They are equipped with an adjustment system that allows the intensity of the threading torque to be varied according to the ...
Clamping range: 10 nm
... Special accessory for BSM 20. For re-sharpening of countersink and cross rose bits with cylindrical shaft. simpest handling for countersinks from Ø 6 – 20 mm support for BSM 20 BASIC VERSION: Countersink grinding fixture for the BSM 20 completely ...
Clamping range: 10 mm
... For BSG 60, for sharpening countersink tool, up to 31mm tool BASIC VERSION: Countersink grinding fixture for the BSG 60 ...
Clamping range: 10 mm
... Professional countersink and drill sharpening mechanism for the BSG 60 for tools to 20mm and up to MK3. For re-sharpening of one-, two-, or 3 flute countersinks and resharpening the faces of one to four flute cutters. The fixation is made by a clamping ...
... Heavy duty constructionWaterproof constructionInnovativeEffective Use :GrindingEDMmetrologyPunch former ...
Braillon Magnetics
... parts. , 15 degree pitch: of +/- 5 seconds , Min Diameter: 2 mm , Concentricity: 0.003 mm Options: , EROWA chucks , 3-jaw chuck / Pliers , ER collets D = clampable diameter (in mm) Use :GrindingmetrologyPunch ...
Braillon Magnetics
... PRECISION MULTIFUNCTION PUNCH FORMER TYPE EPF Waterproof constructionHeavy duty & compact construction Use :GrindingEDMmetrologyPunch former ...
Braillon Magnetics
... The static chuck YC joins SC range with a new feature to change in an extremely compact and strong vise. ...
OML
... Take back working to a new level with WhizAdjust and enjoy the flexibility. This is an innovative and patented toolholder system that is perfect for turning against the sub spindle. The height adjustment goes quick and easy - without loss of stability. Fine-tune ...
Whizcut of Sweden AB
... Static tool holders for Sauter Revolver VDI 50: EMCO Maxxturn 110 Gildemeister CTX 520 linear Gildemeister CTX 620 linear Gildemeister CTX 620 linear mit y-Achse Gildemeister CTX gamma 1250 Gildemeister CTX gamma 2000 Weiler E 110 Daewoo V 500 Gildemeister ...
Clamping range: 80 mm
... specifications
- Spindle Type: A2-6
- Nose Length (in): 1.000 in
- Overall Chuck Length (in): 5.174 in
- Overall Chuck Diameter (in): 5.174 in
- Nose Diameter (in): 5.75 in
- Type:
Hardinge Workholding
... Tap adapter - the affordable entry. The tap is inserted directly into the 19 or 32 mm Weldon system using an adapter. Only suitable for through threads! Tap adapters – getting started economically! By means of the adapter, the taps are taken up directly ...
BDS Maschinen GmbH - Germany
Clamping range: 16 mm - 32 mm
... traits help prevent vibrations even at high speeds - for best form stability at highest Metal removal rate FEATURES THD chuck can be used only with the following units / coils: - Ø 16, 20, 25: on ISG34xx WK-WS and coil ISGS3200-2 ...
Bilz
Clamping range: 16 mm - 40 mm
... Jergens 5-Axis ER Collet Fixtures are an excellent workholder for cylindrical parts. Features, Benefits, & Product Specifications: - Material: Hardened Alloy Steel - Use with your existing ER Collets - Direct interface with other Fixture-Pro® products - ...
... according to your specifications. Some examples of our special production: - Ultra-precision collets with low capacity - Collet chucks - Special vulcanized clamping heads - Gripper fingers - Expanding bushes - Carbide collets ...
This device is equipped with a clamping system which assures a concentricity of ≤ 0.003 mm. This is suitable for all types of shank tools. It also offers a long tool life, and provides the completion on the cutting surface. In addition, the device is ...
... The need to complete most of operations inside the turning center, asks the turret to work with rotating tools for a long part of their life. In order to grant best performances, rotating toolholders have become a basic component in the Turret System. Duplomatic ...
... Our static toolholders are engineered to the highest stability and precision, both for turning as for boring. We manufacture multiple boring bar holders, suitable for the assembly of up to 4+4 boring bars simultaneously for machining on the main and ...
MT
the best suppliers