|
|
|
ANVER, a worldwide leader in vacuum material handling technology, offers a complete range of vacuum lifters and vacuum lifting equipment. Self-powered mechanical vacuum lifters, electric and air-powered vacuum lifters are all available in lifting capacities ranging up to 60,000 lb (26,600 kg) or more depending on your needs.
|
|
Careful handling with GIS vacuumlifters
(up to 500 kg)
- for a variety of products and all kinds of
load surfaces
- combination with electric chain hoists or
wire rope hoists
|
|
MOBICRANE - the mobile vacuum lifting system
This unique vacuum equipment features a new, patented vacuum pump consisting of only two maintenance-free parts; a far more efficient solution than conventional systems.
When fitted with a swivel arm, the MOBICRANE handles loads up to 50 kg safely. Moreover, loads with different surfaces, such as cartons, bags, etc. can be moved efficiently.
On-board batteries make the MOBICRANE independent from a central power supply. The lifter is transported easily with a forklift truck, thus ensuring extremely flexible use.
Customer-specific vacuum attachments and individual applications for Small Goods Handling are developed by EXPRESSO, together with the customer.
|
|
|
The Conco Airlift device acts as a straight rod between the load and the overhead support. As a rigid lifting device, it reduces drag, catch-up and overtravel problems found with cable and chain hoists. The Airlift device makes it possible to “float” the load, making it virtually weightless. And because the operator maintains a “feel” for the load, it is easy to position and set loads or objects in place quickly and precisely. The Airlift device, with dependable smooth operation, can be mounted from an Articulated Jib Arm, overheard trolley or from a fixed overhead position. It operates from ordinary clean, dry, shop air. Its simple design has only a few parts or wear points for long life and easy maintenance and service.
|
|
Compared to the traditional handling devices such as hoists and pneumatic manipulators, the Intelligent Assist Devices by Scaglia Indeva provide relevant advantages:
Precise positioning of the load as they allow for accurate and rapid movements, while traditional handling devices overtravel, bounce and require lots of little corrective movements that reduce productivity.
Intuitive control: It features the “float mode” control or “hands on manipulation”, without actuating the control handle. It makes the most of the natural human ability to coordinate and control motion, thus allowing for a more intuitive control that means a more precise and quicker positioning of the load, especially when this has to be placed in a narrow target as gently as possible.
Improved ergonomics and no effort required. Thanks to the microprocessor based control, the system supplies energy to win inertia both during acceleration and braking.
Speed: IADs respond swiftly, yet smoothly to human touch; the operator notices no time lapse between the machine’s sensing and its response.
Automatic and immediate compensation to weight: it allows handling loads with different weights or loads that vary their weight during handling (emptying out containers) with no stop times at all for turning selector.
|
|
Vacuum lifting with an INDEVA means more productivity, more ergonomics, more safety!! Specialists in vacuum lifting since 1975.
Scaglia INDEVA offers the most complete range of industrial manipulator on the market, including both traditional pneumatic manipulators and state of the art electronic manipulators, better referred to as INDEVA.
Pneumatic manipulators are ideal to handle offset loads while Indeva are ideal anywhere speed, fluid movement and exact positioning of the load are required.
|
|
FAMATEC FRIENDLY is a “standard” solution for specific applications with common requirements. User-friendlyness, unique design and extreme detail care are the key points of FAMATEC Friendly success.
All the solutions from our brands have as common factors the highest care in details and the will to be recognized as product-leader for the quality of the service offered.
|
|
Equipment designed for the “weightless” picking and moving of sacks - in polythene, cardboard, hessian, plastic fibre etc...Simple to use, this range of Dalmec machines allows the operator to move bags quickly, accurately and safely within the operating area.
The bags are picked with either a suction head or with a pneumatically clamp. Vacuum is created by an electric motor or by a Venturi ejector.
This range of manipulators offer maximum flexibility in type, design, dimensions and picking systems order to suit the specific requirements of the user and environmental conditions of the working area.
|
|
Pneumatic manipulating model Standard with tool of taken for movement bags
Description
The standard solutions allow to head at the certainty of the repetitive and optimized solution as from the numerous solutions supplied on similar demands. FAMATEC Standard offers to perfectly definable times of delivery and a precise definition of the technical aspects in phase of offer.
Technical details
In the event specific draft of an endowed manipulating of a system of taken flowing along the revolving and equipped arm of vertical movement through a detail is arranged of raising of the product. The solution is the ideal for who must enliven similari bags or products quickly (as an example scato them). The taken one happens through a ventosa and successively the product can be raised and moved on the horizontal plane in every point inside of the workspace.
The illustrated solution is available on autostabile base and fixed column.
The maximum capacity 65 kg
Range 4000 milimeter
|
|
The Tube of Lifting uses the same flow of aspiration for the catch of the product, the lifting and the transfer of the load. Thanks to this system of aspiration of reliable and robust design, it is possible to handle loads without effort in any safety for your operations of handling, palletization or depalettisation.
Charge up to 200 kg
Type charges: bags, paperboard, drum
|
|
|
ANVER's top-selling systems offer a simple, safe, economical solution to your bag and sack lifting needs. ANVER VT Vacuum Tube Lifting Systems can be configured to handle all load types: porous, semi-porous and non-porous. ANVER offers a free testing service in our ergonomics lab to assist you in determining your load’s porosity and to help you in choosing the appropriate vacuum lifting system.
|
|
|
ANVER, a worldwide leader in vacuum material handling technology, offers a complete range of Vacuum Lifters and vacuum lifting equipment. Self-powered mechanical vacuum lifters, electric and air-powered vacuum lifters are all available in lifting capacities ranging up to 60,000 lb (26,600 kg) or more depending on your needs.
|
|
VacuMaster Comfort - the high-end configuration
- Basic configuration same as VacuMaster Basic
- Ergonomically integrated control, with push buttons, of "chain hoist up/down", "vacuum on/off" and, on models with turning function, "vertical/horizontal"
- Solenoid valve with two-hand operation for "vacuum off"
- Regulated vacuum pump with automatic energy-saving function
- Delivered complete with chain hoist
- Option: chain hoist with frequency-regulated drive
|
|
VacuMaster Basic - comprehensive basic configuration.
- Vacuum lifting device with high degree of variability
- Pump size, operator-handle length, suction pads and main and cross beam lengths can be selected individually to match the specific application
- Main beam with integrated vacuum reservoir and distributor
- Ergonomical operator handle
- Electronic warning device, non-return valve
- Option: turning of workpiece by 90° or 180°
|
|
|
The VacuBoy series are one of the mostly employed products when it comes to the handling of dense material. Whether you want to transport the work pieces horizontally, swivel or turn them by 180? - the VacuBoy is the right choice - up to 2.000 kgs.
|
|
Description
High vacuum generating systems offer clients extra capacity handling options over the vacuum tube lifting range. Whether you want to transport loads horizontally, swivel by 90° or turn over by 180°, we have solutions available up to a 20T capacity.
|
|
The OCTOPUS system has been designed in
response to the operational flexibility required by
palletising robotics and vacuum operated lifting systems in general.
Actually this system allows the handling of objects
with any shape and feature, provided that they have
a reasonable transpiration, without any need to
change or position a vacuum cup and also when
their surface only occupies 5% of the whole suction
plate. Of course the maximum weight of the load to
be lifted will be proportionate to the grip surface.
|
|
ANVER Vacuum Tube Lifters are easy to learn and simple to operate for loading and unloading cartons without manual lifting, bending, and stretching.
ANVER Vacuum Tube Lifters can be equipped with an extension handle that allows one person to unload and stack boxes without excessive reaching, stretching, or back strain. Models are offered to handle loads from 5 lb (2.3 kg) for non-porous loads, all the way up to 660 lb (300 kg).
|
|
| ... products without technical information |
| |
|
|
see the results for the following category