Power: 1.3 kW - 159.4 kW
Maximum temperature: 23 °F - 108 °F
Pressure: 65, 70, 75, 40 psi
... process chillers are at the heart of many operations. Many times, if the chiller goes down, the whole process shuts down. Therefore, the chiller shouldn't be seen as an afterthought, ...
... availability Applications at a closer look HVDC Cooling Systems HVDC cooling systems are project specific. The essential quality factors are water purity and low conductivity. ...
Custom designed solutions with guaranteed operational performance These are complete pure-water cooling systems for various industrial applications with cooling capacity from 2 kW up to several megawatts. ...
Maximum temperature: 1 °C - 37 °C
... air-cooled OMAX Chiller optimally supplies inlet water at a consistent temperature, which extends pump seal life for longer, more sustainable production. Using the 5 Ton Chiller or larger ...
These are complete pure-water cooling systems for various industrial applications with cooling capacity from 2 kW up to several megawatts. These solutions are for a wide range of industrial, infrastructure ...
Power: 5 kW - 510 kW
Maximum temperature: 0 °C - 225 °C
Flow rate: 40 l/min - 1,600 l/min
... and lightweight Water Oil Cooler (also known as a brazed plate heat exchanger) with a high cooling capacity for its size. Please use the PWO Sizing Software on the Product Support Tab for proper cooler ...
Exact temperature control by water-cooling system Depending on the different applications, a polyurethane system often requires extremely exact temperature control methods. Hennecke uses industrial chillers ...
Power: 765 W - 2,750 W
Maximum temperature: -10 °C - 40 °C
Flow rate: 14.7, 11 l/min
... alternative to tap water cooling, these Recirculating Chillers reduce water consumption, while the patented WhisperCool® Environmental Control System reduces noise levels below conversational ...
Maximum temperature: -40 °C - 85 °C
Pressure: 0 bar - 3 bar
... temperature damage/start/operation The battery liquid cooler is specially used for thermal and fluid mechanics testing of liquid cooled battery packs. According to the requirements ...
Maximum temperature: -40 °C - 120 °C
... temperature damage/start/operation The battery liquid cooler is specially used for thermal and fluid mechanics testing of liquid cooled battery packs. According to the requirements ...
Maximum temperature: -40 °C - 120 °C
... temperature operation The battery pack liquid cooler is specially used for thermal and fluid mechanics testing of liquid cooled battery packs. According to the requirements of the ...
... With our cooling water recoolers you can pre-select the desired temperature. This guarantees that it remains constant, which increases the service life of your tools. Our recooling systems also represent a closed ...
... radios, TVs and household appliances. SISE Heat & Cool systems have single and dual circuit versions and work using water, pressurized water or oil. SISE technology meets the heavy demand for « Piano ...
... voltage protection, compressor protection, motor overload, overheating protection, anti-freezing protection, cold water, cooling water break water protection, temperature sensing type ...
... 330mm Tank capacity: approx. 4l Water column: 35m | 5l/min. Cooling capacity: 1000W (1l/min.) Package includes: - Water cooling unit - Connection cable inverter / water cooling ...
Water cooling unit for use with the EVO 200 WP or LITE controller and Tetrix 200 in conjunction with water-cooled welding tools.ols. - Standalone or continuous operation possible - Temperature-regulated ...
Maximum temperature: 3 °C - 5 °C
... spots, etc. • It can be also used for dust suppression, static charge prevention, and humidification. *1) Spray capacity at a water pressure of 5.0 MPa when the number of installed nozzles is 8 pcs. The number of installable ...
... at tap water pressure of 2 kg/c㎡ (0.2 MPa). It varies by the tap water pressure. 4.8 L/hr at 3 kg/c㎡ (0.3 MPa) tap water pressure, 5.1 L/hr at 3.5 kg/c㎡ (0.35 MPa) tap water ...
Maximum temperature: 3 °C - 5 °C
... capacity for each nozzle at tap water pressure of 3 kg/c㎡ (0.3 MPa) when 6–7 nozzles are installed. Spray capacity varies depending on tap water pressure and the number of nozzles. Spray capacity for ...
Efficient and hygienically flawless cooling water systems Properly functioning cooling systems are important for trouble-free industrial production. Consequently, cooling water treatment ...
Power: 800 W
... a door cooled by water, allowing you to host up to 45 kW of equipment without heating the air on output, and without disrupting the ventilation of the servers. The heated air coming from the servers is cooled by a ...
... to the many industrial needs, SIMACO - leader in the fluid moving technology - designed a dedicated range of close loop air-water cooling units, where the SIMACO pump, actual beating heart, is naturally assembled. This ...
Power: 25.7, 9.45, 19, 5.81 kW
Maximum temperature: -15, -10 °C
Flow rate: 48 l/min - 181 l/min
Chiller can be used in the Complete Egg Processing Line. For the needs of the pasteurizers, every chiller must come with OPZL option (for cooling up to -15℃) How it works: In the cooling section, ...
Maximum temperature: 0 °C - 160 °C
Flow rate: 420, 120 l/h
Pressure: 0 Pa - 2,500,000 Pa
Stainless steel or titanium version Sample gas is transported through a tube coil inside an outer shell water flows through. The condensate outlet is located at the bottom of the unit, along with a thermometer (not ...
Power: 1.8 kW - 6.5 kW
Maximum temperature: -20 °C - 55 °C
Flow rate: 400 l/h - 1,500 l/h
... site where utilities supplying cooling water is of a lower quality or special requirements of cooling water are needed, BARTEC BENKE closed loop chillers can be supplied to meet these ...
The Cabinplant water chiller is of the Baudelot (falling film) type. Water flows uniformly from a common overhead distribution trough over both sides of the vertical stainless steel plates. ...
Power: 5 kW - 180 kW
Maximum temperature: 7 °C - 35 °C
Flow rate: 3.6 m³/h - 33 m³/h
... computer, accurate temperature control. •Pump overload protection to ensure service life effectively. • Alarm device for low liquid level to guarantee system running safety. Switch of main power source conforms to CE ...
Power: 15 kW - 360 kW
Maximum temperature: 7 °C - 35 °C
Flow rate: 5.4 m³/h - 90 m³/h
CE Certificated Description Benefits & Features •The device can cool the water temperature ranging from 7 to 35oC. •The low cooling temperature can be customized as per customer’s needs. •The micro computer ...
Power: 4.7, 7.6 kW
Maximum temperature: -15 °C - 45 °C
Flow rate: 3,900 m³/h
for cooling the KHS CoolFlow cold water cooler air-cooled chiller in compact design for outdoor installation for energy-efficient operation of the KHS CoolFlow cold water ...
1.The Industrial Chiller is mainly used to provide cooling water for high-end industrial equipment, at the same time, also widely used in mechanical processing and manufacturing,plastics and rubber,electrical ...
Maximum temperature: 0 °C - 450 °C
Pressure: 0 bar - 110 bar
The ADCA sample coolers are specially designed to cool samples of boiler water or steam for analysis. Sample coolers prevent steam flashing-off from hot pressurized liquid ...
Power: 200 W
Maximum temperature: -8 °C - 3 °C
... independent refrigerating system. This characteristic permits the unit to operate e ectively also for long terms, without ice or water at low temperature. Equipped with a refrigerating circulating pump that is held in ...
Power: 150 W
... the small size. The glass kit is located into 3 cylindric cooled containers. To use the system it is not required to insert water and/or ice. It is possible to use the glass kit showed or other ones having the same characteristics ...
Please specify:
Help us improve:
remaining