Probes

The GENIE 750 sampling probe is an adjustable length, membrane tip probe designed to sample transmission quality natural gas. It can be inserted and extracted from a pressurized line through a full opening valve without the use of a special ...

Single Probe - Multiple Enabling Particle Analytical Technologies 14-Bit HDR In-Process Microscopy 14-Bit HDR Turbidity Image Analysis Derived CLD (Chord Length Distribution) Interchangeable Probe (detachable) system for changes in ...

Municipal and industrial wastewater facilities are continuously monitoring water quality upstream for incoming wastewater, on-site at the treatment facility, and downstream to verify effluent treatment is effective. Regulatory requirements ...

Measuring range (pH): 0-14 pH, 0.01 pH resolution, ± 0.01 accuracy Measuring range (ORP/mV): ± 2000 mV, 1 mV resolution, ±2 mV accuracy Temperature range: -20 to 110 oC, 0.1 oC resolution Current output range: 4-20 mA, 0.01 mA resolution, ...

Oxygen Probe Features The probe is applicable for case hardening in gas, for heat treatment in protective gas, for carbonitriding as well as for measurement of endothermic gas properties. The probe is intended for direct gas atmosphere ...

We use mineral insulated cable to make mi cable probes and the probes can be assembly to different kinds of thermocouples. the specifications of thermocouple probe are from DIA0.25 to 12.7mm or 0.010 to 0.500 inch with SS,Inconel sheath,etc. We ...

“Why do I have to look at the meter to read it?” is a question we hear from our customers. It may sound absurd, but we took it seriously when we introduced our new 710A grounding and bond meter. The BKDP-M2 Display Probe combines the ...

Materials : ¾ PSU Body ¾ Graphite Electrodes ¾ O-Ring BNC ¾ Temperature sensor embedded in an INOX case, in direct contact with the liquid ¾ Waterproof connector Thread: 1/2” GAS or 1” GAS Cell’s constants: K = 0.1 cm, K = 1 cm, K = 10 ...

Contacting Conductivity Instrument IP66 panel, surface or pipe mounting 2 x relay, plus 1 x 4-20mA current outputs Auto or single range operation Displays conductivity, resistivity, ppm and temperature units Ideal for small water ...

The moisture content in the sampled gases obliges to heat both the probe and the collection devices. The material of the internal body of the probe ensures the necessary rigidity as well as a certain resistance to temperature and corrosion ...

The Hall Probes - ultrathin and miniature hall sensors (transverse, axial, two-dimensional, three-dimensional) produced by Dexinmag company have an ultra-wide magnetic field measurement range of 0.1uT-30T, and the linearity is as high ...

During manual high-voltage testing, the test pistol is used to contact the test object. Various versions and cable lengths are available for a wide variety of applications. • Safety test pistols up to 10 KV and 12 KV • Safety test ...

- InAIGaN-based UV sensor - Quartz window - Teflon diffuser (option) - Case material : Aluminum - Cable length : 5m(standard), customized length is available - Power supply : - Output : DC voltage( - Operating ...

SEDI-ATI has acquired a very specific know-how in the integration of an optical fiber into a metallic needle. Fiber optic needles are suitable for diagnostic, dentistry and dermatology applications. FIBERS Our fibers are USP Class ...

Retractable high voltage probe for safe testing and application of high voltage. Pressing the red push button extends the probe tip. Upon release of the button the probe tip retracts back into the sleeve. Test multiple points easily and ...

ETS-Lindgren's Model 91550-1 and 91550-1L Current Probes are extremely broad frequency range sniffer probes covering 20 Hz to 100 MHz. Both series of current probes have a calibration available down to 20 Hz, which make them ideal test ...

Soil probe Detecting compacted soil layer and areas left by ploughs The stainless steel soil probe is a tool used for detecting (or probing) soil layer densities, water permeability levels, and soil types. It does not require the ...

This is an Optical Probe with an RS232 electrical interface and compliant with IEC62056-21 standard. It is especially used to read electricity meters closely with laptop computers and to remotely read with modem which meters without electrical ...

Our isokinetic probes with an oversheath provide additional support to stabilize the probe during sampling operations. The oversheath also allows the addition of a packing gland to achieve a tight seal between the probe and port. Our ...

ALTAIR is the innovative sampling system designed by TCR Tecora® to take air samples in accordance with DM 30/03/2017 “Quality assurance procedures to verify compliance with the quality of ambient air measurements, carried out at measuring ...

The thermal conductivity sensor is designed to continuously measure Carbon dioxide (CO2), Nitrogen (N2) or Hydrogen (H2). It is ideal for high-precision measurements under harsh conditions. The measurement range varies from trace to ...

Operation from the browser on a third-party device (PC, smartphone, tablet) with access control Scope of supply DOSAControl DCW 400ip, 230 V standard connection cable 5 m, IP 65 housing, 229 x 204 x 116 mm (w x h x d) made of ABS ...

Multipurpose type K probe, 1 meter cable with handle

CS87 PROBE OXYGEN SENSOR The CS87™ and CCS 2000™ series of oxygen sensors are designed for measuring the oxygen partial pressure of the furnace atmosphere. The robust design withstands thermal shocks and maximizes service life. A ...

The enthalpy probe is easy to use and allows simultaneous and precise measurement of plasma enthalpy, temperature, velocity and composition at a given point in the jet flow. It is commonly used in research laboratories and in the industry ...