- Detection - Measurement >
- Electrical Measurements >
- Other electrical measurement equipment
Other electrical measurement equipment
... PE-KAYO Series specially designed for the Oil&Gas stations as it has multiple functions. The detector has a special accelerometer chip inside to monitor physical bumps happening on the location where the device installed along with gas measurement functions. ...
Pressure: 8 MPa
... The pressure scale device is to place the special instrument in the ground casing, and simulate the formation conditions of the special instrument under certain pressure and temperature, thereby verifying the performance of the instrument and marking. Features: 1) ...
... Male and female test probe kit used for voltage and continuity checks on automotive connection systems. • - Multibrands • - Quality of analysed system • - Simple, practical and effective • - Connection systems must be disconnected • - Developed in collaboration ...
One-Too
Voltage: 12 kV
Current: 400 A
Embedded pole uses the insulation material to reliably sealing combine vacuum interrupter and the main loop conductive element, and the insulation support as a whole, which has the advantages of simple assembly, stable weight, high reliability and strong ...
Wenzhou Vacem Technology Co., Ltd
Pressure: -1 bar - 400 bar
... Leak standards / test leaks For the simulation of leaks and for monitoring and adjusting leakage testing systems • various connection possibilities included • pressure ranges from -1 to 400 bar • leakage rates from 0.01 to 1500 cc/min ...
Monitor doors remotely with magnetic closure sensors. The GRI-4701-A sensors are designed to eliminate false alarms that are common with standard floor switches getting damaged by fork lifts or other equipment. The contacts are moved up onto the track ...
Xytronix Research & Design, Inc.
Primary current: 4 mA - 20 mA
... Thickness:20mm Description:Hall sensor current module - 2 channels - 10A - 0-10 Vdc Application:Direct and alternate current measurement Series:88DCM23 Colour:black ...
... SERVOVALVES BENCH Servovalves bench Expertise and calibration of hydraulic servo valves. ...
Temperature: 0 °C - 50 °C
Voltage: 15 V
... features - The load cell simulator TYPE SC1 has been specifically designed to simulate load cell for instrument calibration and plant simulation. - The simulator may be connected to the instrument instead of load cell and generates the required ...
... The Condor-Rotatest indicates the phase sequence in a three-phase mains circuit and thus the direction of rotation for electromotive appliances. The additional phase monitoring glow lamps also indicate whether all the outer conductors are live and ensure ...
... Gear Tooth Sensor Features • Senses broad range of ferrous target sizes • Senses a frequency range up to 12 kHz • Gap sensing capability up to 3 mm • Full output down to zero Hz • Rugged, NEMA 4 sensor housing • Available with 3/4in ...
... HX-11 Series Of Magnetic Sensor Switch HX-11 Series of Magnetic Sensor Switch has HX-11R(reed switch),HX-11DF( 2 wire solid state),HX-11PNP(PNP current sinking)、HX-11NPN(NPN current sourcing),HX-11RMManipulator)... Features: Simple construction, ...
... CERAMIC CAPACITANCE MANOMETER, CCMT-D SERIES The CCMT-D series is a capacitance manometer, which detects static electric capacitance occurring when a barrier membrane made of ceramic (alumina) is deformed by changes in gas pressure.Adoption of Ceramic ...
Primary current: 20 mA - 50 mA
The sensor is a series of products made by tilizing the characteristics of the Hall element. It is a switch type sensor that achieves switching control performance by sensing high and low level signals generated by an external magnetic field.Working distance ...
MGS-H01 is a step analog voltage output type magnetic navigation sensor for AGV. MGS-01 is composed of 15 bit original magnetic sensor elements, encoder and D/A converter. The step analog voltage (Deviation out) changes proportional to a relative position ...
... Series MFS Non-contacting and wear-free for long service life Space-saving installation Description For monitoring piston position on pneumatic cylinders Non-contacting and wear-free for long service life ...
With this wattmeter you will still have the power consumption under control. Plug the power meter to a wall socket or enter your subscription tariff and the results are immediately displayed on the display. Thanks to the integrated backup battery, you ...
Magnetic sensors indirectly measure properties such as direction, position, rotation, angle and current by detecting the magnetic field and its changes. Compared to other direct methods, such as optical or mechanical sensor, most magnetic sensors require ...
... Diameter Measurement System For control and regulation of diameter of medical tubes Specifications Measurement range 25mm Distance between receiver and emitter 100mm, L Accuracy ±10 µm Number of axes under control 2 Speed, measurements/s 1000 Regulator ...
Althen sensors
The HPD IQ3000 is a high precision fully automated probe station for 150 mm and 200 mm substrates in a 4 K environment. To accelerate the realization of commercial quantum and superconducting computers, we provide chip developers with the tools they need ...
FORMFACTOR
... The leakage probes of the series PUK / PUKK are used in conjunction with a suitable evaluation for conductive leakage monitoring of electrically conductive products. The leak detector is designed for a wide range of applications. The conductivity, ...
... General Features •Resolution up to 0,001 mm •Robust mechanical and electrical construction •Protection to IP67 •Periodic reference signal •Magnetic FMTL500 (Linear), FMTR500(Rotary) •Magnetic FMTL200 (Linear), FMTR200(Rotary) Flange Diameter ...
Primary current: 5,000, 1,000, 2,500, 500 A
... "CY-RCT02A1 (5)" Type 1 (5)A Rogowski coil split current transformer provides easy-to-install plug-and-play solution that can be connected to a power meter or a 1(5)A current transformer Equipment used in conjunction. The Rogowski coil split ...
Shenzhen Chuangyin Technology co., ltd.
... Trainers for the Basics of Electronics The EASY Electronics Case is training system for lower grates and starters. While any other boards are for higher education. For reaching the best results, the curriculum should start with a plug-board for the ...
Subscribe to our newsletter
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group