Special handling and lifting tools

CBD2 ・ Double-end Turnbuckle for chain ends Materials: Screw: SCM435 Steel, Black oxide finish, Heat treated to Rc 33-39 Long Hex Nut: S45C Steel, Black oxide finish, Heat treated to Rc 33-39 Nut: Steel Datasheet: https://www.imao.co.jp/files/on-cat/pdf/en/cbd1-e.pdf

ICE Tensioner with clevis connection. For exact length adjustment of the chain strands. Special robust design due to a solid threaded bar. No open thread, safety device to prevent loosening and grease nipples on both sides. Rough shortening ...

ICE Tensioner with clevis connection. For exact length adjustment of the chain strands. Special robust design due to a solid threaded bar. No open thread, safety device to prevent loosening and grease nipples on both sides. Rough shortening ...

Ratchet easy to handle (also with gloves) Innovative forged design – light and robust Patented, practical prevention of loosening Magnetically clinging locking device - also suitable as anti-theft system (lockable) Easy to clean and ...

The powerful GeoMax Zone laser rotators portfolio offers the right construction tools for all trades and applications. The Zone60 DG is a fully-automatic grade laser in both axes, specifically designed for construction workers who ...

The powerful GeoMax Zone laser rotators portfolio offers the right construction tools for all trades and applications. Adding easy-to-use, dial-in grade capability to the dependability of the Zone40 H core, this laser is more flexible ...

The powerful GeoMax Zone laser rotators portfolio offers the right construction tools for all trades and applications. The multipurpose laser Zone20 HV laser offers the Zone20 H basic specifications plus the capability of vertical ...

The safe solution for handling large and heavy bearings Mode of operation: The simatool Bearing Handling Tool consists of two handles, two turning handles and steel strips that enclose the bearing at the outer race. Uniform tightening ...

Standard suction plates PX and P2X for OCTOPUS systems The suction plates PX described on this page are installed as standard on all OCTOPUS systems and, therefore, can be supplied as a spare or replacement part. They are made with ...

Standard suction plates with shut-off valves PXE and P2XE for OCTOPUS systems The suction plates described on this page are the same as the previously described PX and P2X, but with the addition of shut-off valves inserted in each ...

Special suction plates PY and P2Y for OCTOPUS systems Compared to the standard ones, when given the same gripping surface, these suction plates develop a greater force (item PY) and can grip even very rough and uneven surfaces (item ...

Load limit: 5 t - 22 t

The DP LIFT jacks line offers its customers an easy and safe usage, both for automotive and industrial applications. The jacks consist of a highly resistant diaphragm and internal telescopic guide. They are fitted with a limit stop device ...

Stäubli solutions for mould handling and loading significantly reduce mould changing time. This means you will gain even more productivity and flexibility in frequent production turnarounds. Mobile or dedicated to a single machine, ...

Components that are to be lifted, lowered, shifted and brought into the best operational position can be achieved by using torque tubes with minimum force required by the worker. The operator can reduce both component weight and torque ...

These torque tubes lifts, lowers and moves parts to its best working position without exerting much effort from the operator. The IRZ-TT-250 alleviates part weight and torque reaction for up to 250 Nm therefore maximizing productivity. ...

The 500 Nm Torque tube by Ingersoll Rand relieves the operator of both part weight and torque reaction up to 500 Nm, resulting in high workplace productivity. This permits parts to be easily lifted, lowered, moved and brought into best ...

Description The Vertical Stack Rail (VSR) is the solution for vehicles that have top exhaust and need to move through an apparatus bay or garage. Overhead exhaust stacks The VSR system is designed for vehicles with overhead exhaust ...

BIN TIPPER: THE SOLUTION TO YOUR BACK PROBLEMS The low back pain problems that are produced by repetitive and not very ergonomic operations in environments with high humidity levels and low temperature can result very expensive for ...

The EMS300TD drum tilter is a multifunctional and 100% sanitizable equipment that allows the handling of drums (metallic, plastic or cardboard) of different shapes and dimensions in the production clean rooms for the discharge of fluids ...

ULMA Inoxtruck EBT10 tilters allow an ergonomic handling/casting of loads, thanks to the tilting system of 85º and 105º. These models have an innovative design that makes possible an ergonomic handling/tilting to conveyor belt or other ...

In the shop or on the job, moving long lengths of pipe is a snap with Max Jax!Standard Features STEEL CASTERS NOW STANDARD! Support 2,500 lb (1,135 kg) each! Large, convenient adjustment handle Optional casters enable pipe ...

Move beams around the shop safely Standard Features STEEL CASTERS NOW STANDARD! 2,500 lb (1,135 kg) capacity Holds beams up to 24" (61 cm) Clamping device centers load on stand & holds material in place while moving around ...

Lifting device for lifting, levelling and depositing of ISO containers Lowering of containers from a truck up to 1.750 mm height foldable level arms for easy shipment Infinitely adjustable to container height

Lifting height: 480 mm

Cable reel jack 1095 Cable reel jack for cable drums of up to 16 t, lift 480 mm and 3.4 m dia. The robust spindle jacks conform to the German BGV D8

Car body hoist 1094 Car body hoist, (BGV D8) with adjustable claw, top load 8 t, claw 7 t, lift 480 mm The name haacon stands for outstanding quality in the German medium-sized company segment and effective after-sales service. ...

Need a hand with metal components? We make lifting of car parts efficient and ergonomic, with customized solutions for specific components. TAWI lifters help speed up workflow and increase productivity in mechanical and automotive ...

Load limit: 40 kg

The Tawi PRO40 is a lifting device that can be used to lift and transport boxes such as milk served in school restaurants. The L-shaped profile can accommodate boxes with maximum weight of 40 kg. In addition, the lift allows the staff ...

Load limit: 80 kg

The innovative, modular design together with a wide selection of tools, make TAWI Lifting Trolleys ideal for flexible and efficient handling of most types of goods up to 250 kilos. Ergonomic and easy to use. Efficient handling ...

Load limit: 0 kg - 30 kg

With an easy and quick installation the NEO 30 can be installed in most common rail system. Just attach the swivel to the trolley or an eyebolt and the NEO 30 is set for use. No need of adding space and cost consuming media supply – the ...

Load limit: 25 kg

Monitor-/TV-Lift Ket Screen Lift S 4701 Cost-efficient, compact lifting system for screens up to 24” and weights up to 25 kg. Special features High lifting speed Simple installation for different assembly situations Can ...

Load limit: 5 kg - 8 kg

Monitor-/TV-Lift Ket Spring Lift S 4701 Compact lifting system for flat screens. Lifted by a gas spring without motor drive. Special features Smooth stop of the unit trough a damped gas spring Very small unit, suitable for ...

Load limit: 30 kg - 70 kg

Description Cost-efficient, compact lifting system for screens up to 50” and weights up to 70 kg. Special features •High lifting speed •Simple installation for different assembly situations •Can be supplied with any stroke up to ...

Pronal special inflatable jacks are an alternative to hydraulic jacks or compressed air actuators. Thanks to the inflation pressure, inflatable jacks deform to perform functions like pushing, pressing, guiding, clamping, blocking, damping, ...

During the transformer assembly and after the winding drying phase, it’s sometimes necessary to adjust the height of the winding. VTR lifting bags are inserted between the winding levels and inflated to slowly raise the winding so that ...

Square lifting bags or soft inflatable bladders, are compressed air systems comprising a square shaped rubber membrane. Filled with air, water or oil, these true inflatable seals are generally mounted in automated industrial systems to ...

Load limit: 6 oz

Hydraulic lifting devices series JH-G plus JUNG Hebe- und Transporttechnik GmbH produces innovative toe jacks that are both handy and strong, and that offer practical, daily use with a high level of product quality. Our JH-G plus series ...