... For the preparation of plane-parallel sample surfaces Suitable for clamping glass slides 28 mm x 48 mm Stops can be recessed via an integrated handwheel for plan-parallel grinding of the ceramic stone. A vacuum pump is required to generate the vacuum For ...
... Conveyor belts for the feeding of our size reduction machines (shredder, granulators,...) & for the transport of the size reduced material (granulates) to the following machines (like silo,...) ...
for the conveying of the size reducted material (like granules, bottle flakes, film flakes) after the washing process
The Combi-CLL Log Loader, is a game-changer in how we handle and load logs into containers. It’s all about speed, efficiency, and most importantly, safety. Designed specifically to tackle the tricky demands of the forestry industry, the Combi-CLL is making ...
... Suitable for loading any material into containers. • Capacity: 30,000 kg • Height: 626 mm • Overall Length: 16560 mm • Width: 3250 mm • Container Frame Length: 9780 mm • Motor: 37 kW 3 Phase • Hydraulic Stroke Mechanism: 13600 mm • Container Sizes: ...
Diameter: 1 mm - 7 mm
... Collet set ER 11, 13-parted Collet set ER 11, 13-parted, diameters for iSA 500 und iSA900 ...
... For direct or comparative, internal or external measurements • MEASUREMENT - Internal or external - Direct or comparative - No need for expensive setting standard thanks to the included standard - Constant measuring force for optimal repeatability • ...
These heavy duty self-tightening grips with a capacity range of 200 lbf to 2000 lbF (1 kN to 10 kN) are ideal for tensile testing of a wide range of materials. The serrated steel jaws ride on rollers instead of sliding along the surface of the housing, ...
Mark-10
... This compact self-tightening grip with a capacity of 100 lbF (500 N) is ideal for a range of low force tensile testing of small samples. The serrated steel jaws are easily opened with an ergonomic spring-loaded lever. Features and specifications •100 ...
Mark-10
... This slender grip is ideal for testing small and hard-to-reach parts, such as electronic and mechanical components. Use this grip with a force gauge and a test stand to create a complete testing system. Miniature Component Grip For a variety of small ...
Mark-10
With a knob diameter of 60 mm, the handwheel allows precise and fast setpoint adjustment. The handwheel does not stop abruptly when the crank or knob is released during a fast turning movement, but runs for a short time. The mechanical detent is clearly ...
... High quality and extremely solid construction - perfection in detail The premium MHO series handwheel is the first choice when other handwheels cannot match the high quality of the application. It is ideal for entering important setpoints in centralized ...
... The small, lightweight Wedge Grip is ideal for tensile testing below 500 N. A spring-loaded lever ensures the serrated jaws (16mm wide x 20mm high) are easy to open for fast securing and release of samples. As load is applied, the self-tightening action ...
Mecmesin
... The 5 kN Wedge Grip is ideal for tensile testing of flat and rigid materials, including plastics, rubber and light metals. A spring-loaded lever ensures the serrated jaws (25mm wide x 32mm high) are easy to open for fast securing and release of samples. ...
Mecmesin
... Lever-action wedge grip with it's lever being positioned at the front for easy operation. The open back of this wedge grip allows wider samples to be fitted, although still held across the central 34 mm width. Supplied as body only with QC-20mm connection. ...
Mecmesin
... Technical Data Pipe driving centre with integral head in HSS. ...
SASSATELLI
Pipe driving centre with interchangeable head in HSS
SASSATELLI
Bidirectional pipe drivers for roughing and finishing. Removable and usable on all four sides. The 45° teeth allow a greater traction coefficient in machining and strongly reduce the pipe deformation.
SASSATELLI
... With graduation and protractor bubble for marking out Two types available for pipe diameter 1/2" - 5" and 1" - 24" Adjustable protractor bubble with graduation Hardened centering pin The DWT Centering Head can be used to determine the exact position ...
... Taper clamping units are particularly suitable for horizontal and vertical multiple clampings. The taper clamps are compact in build and therefore enable clamping without geometric interference. Material Body Tool steel, hardened, bright Screw Heat-treated ...
HALDER France
Max. clamping force: 40 kN - 40 kN
Stroke: 62 mm - 443 mm
The all-round clamping system is a classic for conventional clamping and gripp clamping. It is suitable for all common milling. Clamping of unmachined parts, saw-cut or flame-cut material by penetration of hardened, replaceable gripper elements into the ...
HALDER France
... Inserting the socket head screw moves the two clamping chucks outwards and presses the workpiece against a stop. Material Body Aluminium AI Taper Case-hardened steel, blackened Screw steel ...
HALDER France
... Pull-down workholding clamps generate pull-down action, pressing workpieces down onto the fixture base, as an alternative to applying sideways force to the jaw on the fixture base. The OK Vise single-wedge pull-down clamp design is a standard single-wedge ...
... Pull-down workholding clamps generate pull-down action pressing workpieces down onto the fixture base, as an alternative to applying sideways force to the jaw on the fixture base. The double-wedge pull-down clamp is the most traditional model. It is ...
Several types of the workholding platforms for workholding operations are offered by OK-VISE through its global distribution network. OK-LOCK zero-point positioning system, RPS trunnion unit and Tooling Blocks are some of workholding platforms used in ...
Vise Force low-profile wedge clamps provide a fast and flexible workholding solution and are ideal for clamping multiple workpieces. The internal return spring design prevents chip buildup and allows for a closer placement of multiple clamps. These low ...
Fixtureworks
Clamping force: 401 N
... Product overview
This push-lock clamp unit provides tool-less locking with a 90° turn of the handle for quick slide and angle adjustment. The pre-assembled unit mounts directly to 14 mm round shafts, eliminating the need for custom ...
Fixtureworks
... Overview
Pneumatic shaft-locking clamps PSLC-M provide rapid, secure locking of sliding shafts and spindles after position adjustment. The unit uses spring clamping when air is removed and pneumatic unclamping when air is supplied, ensuring ...
Fixtureworks
Max. clamping force: 3,500 daN
Stroke: 125 mm
Weight: 19.9 kg
... Product overview
Machine vise with movable rear jaw and hydraulic spindle for adjustable clamping on milling machines and machining centers. Model 6516-M125, size 125 mm, body in ductile iron.
Applications
Designed for milling, ...
Bison S.A.
Max. clamping force: 5,500 daN
Stroke: 160 mm
Weight: 52.4 kg
... Overview
Industrial machine vise with hydraulic spindle and a movable rear jaw. Compact 160 mm size, body in ductile iron, designed for precision clamping on milling and drilling machines.
Availability
Out of stock.
Key ...
Bison S.A.
Max. clamping force: 5,000 daN
Stroke: 200 mm
Weight: 26.2 kg
... Overview
Two-piece machine vise for secure clamping of workpieces on milling and drilling machines. Designed for metric setups and industrial machining environments.
More information
- Model / Product type: 6522-200
- Size:
Bison S.A.
S60-FA610 facing head slider transmission is designed with linear rails and a ball screw grade C5 which are incorporated with a servo motor. The roundness of spindle nose is within 0.002mm and repeatability of facing head slider is within 0.01mm. This ...
S80-FD880 facing head slider transmission is designed with linear rails and a ball screw grade C5 which are incorporated with a servo motor. The roundness of spindle nose is within 0.002mm and repeatability of facing head slider is within 0.01mm. This ...
FMDM155 Built-in motor spindle with facing head is designed of a ball screw grade C5 driven which are incorporated with a servo motor for feeding. The roundness of spindle nose is within 0.002mm and repeatability of facing head slider is within 0.01mm ...
... Product overview:
The Fixar compound sine table with a Neomicro permanent magnetic chuck is designed for precise angle grinding, electrical discharge machining (EDM) and measuring. It enables simultaneous tilting of the workpiece around ...
Max. clamping force: 1,300 kgf
Stroke: 28 mm - 270 mm
... Model ASC-77X102S, 77X130S, 77X170S, 77X210S ASC-127X160S, 127X210S, 127X260S, 127X310S, 127X360S
Patented stud bolt seat design can efficiently calibrate the clamping center
It is recommended to operate with a Master Plate on a five-axis machine
Compatible ...
HOMGE MACHINERY IND. CO., LTD.
... Model: HRV-5015A,5015B,5015C,5015D,5015E HRV-7515A,7515B,7515C,7515D,7515E HRV-10018A,10018B,10018AC,10018D,10018E ●Adjustable vise can clamp working piece in square, round or irregular shapes. It enhances machine revolving rate and shortens time ...
HOMGE MACHINERY IND. CO., LTD.
Stroke: 0 mm - 1,140 mm
Weight: 73 kg - 217 kg
... Overview
Mechanical vise designed for CNC machining centers, optimized for gantry-type machines. Short overall length with large jaw opening. Multi-stage clamping from 0 to 8000 kg while maintaining high accuracy and repeatability.
Features
- Mechanical
HOMGE MACHINERY IND. CO., LTD.
Max. clamping force: 23 N - 40,000 N
Stroke: 32, 37, 116 mm
... Mechanical centre-clamping vises MZX The centre-clamping vise series MZX is used as a powerful, universal and reliable clamping device on zero-point systems. The base body of the vise is provided with system holes suitable for LANG or market competitors, ...
Spreitzer GmbH & Co. KG - Präzisionswerkzeuge
Max. clamping force: 50,000, 40,000, 30,000, 16,000 N
Stroke: 19 mm - 114 mm
The mechanical self-centering vises of the MZR series are cost-effective clamping devices for raw part machining on multi-axis machining centers and automated manufacturing systems. The compact design provides excellent accessibility to the workpiece, ...
Spreitzer GmbH & Co. KG - Präzisionswerkzeuge
Max. clamping force: 5,000 N - 70,000 N
Stroke: 12 mm - 178 mm
The mechanical self-centering vises of the MZE series are powerful and cost-effective clamping systems designed for use on multi-axis machining centers and automated manufacturing systems. The compact design ensures excellent accessibility to the workpiece, ...
Spreitzer GmbH & Co. KG - Präzisionswerkzeuge
Stroke: 80 mm
... Entirely made of steel. All pieces highly protected against corrosion by cathaphoresis. Brass nut ensuring a soft and comfortable operating The vice can be set up on a longitudinal position Ground and hardened guides Vertical and horizontal V grooves 2 ...
DOLEX
Stroke: 105 mm
... Entirely made of steel. All pieces highly protected against corrosion by cathaphoresis. Brass nut ensuring a soft and comfortable operating The vice can be set up on a longitudinal position Ground and hardened guides Vertical and horizontal V grooves 2 ...
DOLEX
Stroke: 125 mm
... Entirely made of steel. All pieces highly protected against corrosion by cathaphoresis. Brass nut ensuring a soft and comfortable operating The vice can be set up on a longitudinal position Ground and hardened guides Vertical and horizontal V grooves 2 ...
DOLEX
... TCH 13 H is the most compact two-axis head with a fork structure offered by Technai Optimal price-performance-precision ratio, accepts electric spindles with a body of up to D 180mm with a torque range of 35 -: - 60 Nm Designed to excel in mould finishing, ...
Technai Team S.p.A.
... TCH 15 H is the medium-small sized two-axis head with technical contents that reflect the state of the art and the experience of Technai in the design of Direct Drive heads. The structure is fork-shaped with a double motor on the A axis – perfectly ...
Technai Team S.p.A.
... Two axis head with fork structure optimized for 5-axis machines, integrated modules with Technai Direct Drive motors on both axis, available with electrospindles up to 24.000 rpm and 42-60 kW, HSK-A63 or HSK-A100 tool holder. TCH 20 head is designed ...
Technai Team S.p.A.
The WDW Series Computer Control Electronic Universal Testing Machine is being widely utilized for the purpose of doing tension, compression, flexure/bending and shearing of different type of specimens. It suitable to be used in metal and non-metal materials ...
... Magnetic sheet floaters Magnetic sheet floaters are used for lifting steel sheets from a pile and holding them suspended in the air. The sheets are separated from each other by positioning magnetic blocks specially designed for this purpose at one or ...
SELTER
... 3-sided magnetic block, 2 of which have a 'V' of 90º. Totally watertight. ...
SELTER
... They contain neodymium magnets. Maximum temperature: 60ºC ...
SELTER
... Common applications The TAKTOMAT transport systems are mainly used in the automotive industry. Features and user benefits • Lifting / lowering conveyor for accurate positioning transportation of large components with • a weight of 750 kg of machining ...
Andlilog's Mini Self-Closing Wedge Clamps are used for fast, clamping operations on a wide range of materials. They are available with either standard diamond-cut jaws, or other jaw types for different components. The MAC500 model is suitable fpr tensile ...
Max. clamping force: 4,000 N - 50,000 N
... HIGH CAPACITY VICE up to 280 mm with no limitation with divided vice COMPACT several vices can be used together for multiple clamping HIGH CLAMPING POWER up to 22 000 Newtons (2.2 TONNES for 5 M/kg) WORKPIECE CENTRED ON THE TABLE via the indexed ...
Max. clamping force: 22,000 N
... DIVIDED VICE CAPACITY adapts to workpiece dimensions INCLUDING 2 Base plates : 09-016 height 28 mm 1 moveable indexable jaw : 09-025 clamping range 16 mm 1 fixed indexable jaw : 09-080 width 60 mm ...
Max. clamping force: 4,000 N - 50,000 N
... Allows simultaneous clamping of several workpieces of different sizes or shapes in the same vice. FORCE can be adapted in seconds to any type of vice (from 100 to 200 mm) and is the ideal accessory for all types of mechanical, pneumatic or hydraulic ...