Other machine tool equipment

A screw type clamping mechanism provides long clamping stroke and firm clamping. Precision-ground jaw is perfect for clamping the workpiece on its finished surface. In clamping, the jaw provides downward force to prevent part lift.

Clamping force: 500 N - 1,400 N

Can hold workpiece by a clamping bar with easy handle operation. Long thrusting stroke of a clamping bar allows clamping a recessed part. Note: Clamping bar is separately sold. Clamping Force: 500 N / 1400 N

Feature •These clamps hold the inside diameter of the workpiece. •The wedge construction allows powerfully clamping the workpiece. •Long clamping stroke is idéal for holding as-cast or roughly-finished holes.

THE HAAS AUTOMATIC PARTS LOADER (APL) IS DESIGNED WITH TODAY’S JOB SHOP IN MIND, PROVIDING SIMPLE AND AFFORDABLE AUTOMATION ON HAAS TURNING CENTERS AND SMALL VMCS. The APL integrates seamlessly with the Haas control, and is set up ...

Max. clamping force: 16 N
Stroke: 130 mm

NEW 130mm Self Centering Vise & Accessories Our newest design incorporates all the great features of our other industry leading self centering vises with the addition of a 130mm square base and wider master jaw that allows the holding ...

Stroke: 75 mm

NEW 75mm Self Centering Vise & Accessories Picture for category NEW 75mm Self Centering Vise & Accessories Quick change jaws, no tools required Reversible Jaws Pull-down jaw design minimizes jaw lift Adjustable centerline, easy ...

Clamping force: 1.5 kN

New K5.3 Low Pressure Pneumatic Clamping Module Zero-point clamping system for set-up-time-optimized clamping. The compact size makes it ideal for light duty machining applications as well as non-machining applications like assembly ...

Machining centers are equipped with special machines and automatic tool change that uses the numerical control boring and facing heads that have automatic balancing. These machining centers are equipped with the TA-CENTER designed for ...

The Ta-Tronic features heads which automatically balance for numerical control boring and facing. The heads can be manually or automatically used on small boring machines and other equipment. Two counter weights are used to balance the ...

D'Andrea presents U-Comax NC axial control boring and facing heads. These heads are made especially for use on machining units, transfer machines, and specialized machines. These are axial command heads. The feed control of the toolholder ...

Otto Ganter GN 920.1 wedge clamps enable clamping through the DIN 7984 socket head cap screw and the clamp wedge. Both cause an outward movement in the clamping jaws. The clamps are suitable for multi-clamping applications as well as ...

Description SCHUNK quick-change jaws convince with their easy handling and reduce set-up times allowing jaw change within seconds. An extremely large clamping range can be realized by using interchangeable inserts, without having to ...

Max. clamping force: 25, 40 kN

Description Double clamping vise with third hand function for easy and safe loading of several workpieces on tombstones. Field of application 3-axis standard machining centers 4-axis vertical machining centers 4-axis horizontal ...

Max. clamping force: 25, 50, 40 kN

Description The SCHUNK KONTEC KSC-F single-acting vises are perfectly suitable for equipping palletizing systems. Due to the modular system, the VERO-S interface and the 160° quick clamping, they can be adapted to new clamping tasks ...

The development of the BOLT LOCK system is a logical continuation of today's quick-release systems for punches beyond a shaft diameter of 40 mm. Since the punches are available for any geometries, the compact system can be used for ...

KomTronic® UAS-160-... Unique, with a direct position measuring system on the slide In order to enable encoding to take place directly on the slider, the encoder also takes disturbance variables of mechanical elements into account, such ...

The PKE-101 and PKE-104 facing heads with single slide offer large tool mounting areas, and therefore permit the most rigid tool design and heavy depth of cut in the low spindle speed range. The PKE facing head is subject to a spindle ...

Facing head with single slide for low spindle speeds The PKE-101 and PKE-104 facing heads with single slide offer large tool mounting areas, and therefore permit the most rigid tool design and heavy depth of cut in the low spindle speed ...

Max. clamping force: 25 kN
Stroke: 128 mm

The VE100N by Kitagawa is a steel vises which is a low floor type. It can be lifted at its minimum to ensure an accurate machining process. Its jaw has a height of 40 mm and a stroke of about 128 mm. The total height of this device is ...

Max. clamping force: 30 kN
Stroke: 204 mm

The VE125N, manufactured by Kitagawa Europe® innovates a low profile vise with adjustable clamping force using a toggle mechanism that offers an increase in machining capabilities. It is designed with a jaw height of 50mm and a stroke ...

Max. clamping force: 45 kN
Stroke: 274 mm

The Kitagawa Europe VE Series Vices are practically designed with a low height model, thus providing a better, high-performance machine procedure capabilities. With the jaw lift being customized into a smaller unit, this product has developed ...

Makro-Grip 77 Night King A 5-Axis Vice in its purest form! Reduced to its basic requirements for 5-axis machining: Accessibility and Holding Power The top-selling and most popular Makro-Grip 5-Axis Vice in a new version for automation ...

Max. clamping force: 14,000 N

Makro-Grip 5-Axis Vice 77, jaw width 46 mm New Category: The previous Version of the Makro-Grip 46 will be replaced by the new Makro-Grip 77 with jaw width 46 mm. The revised version is equipped with a Makro-Grip 77 spindle and ...

Max. clamping force: 14,000 N

Makro-Grip 5-Axis Vice 77, jaw width 77 mm Types Makro-Grip 5-Axis Vice 77, Item No. 48085-77 Item No. - 48085-77 Base length - 102 mm Clamping range - 0 - 85 mm Weight - 2.3 kg Makro-Grip 5-Axis Vice 77, ...

The new power-operated centering vices have a number of advantages. In addition to the compact design, the high repeatability and flexibility of use, the new power-operated centering vices convince with extremely high clamping forces, ...

Max. clamping force: 40, 25, 60 kN

APPLICATION Particularly suitable for use on machining centers. TYPE Size 92 - clamping system mechanical-hydraulical with power transmitter, manually operated. Size 125, 160 and 200 - clamping system mechanical-mechanical with power ...

Max. clamping force: 40, 25 kN

The type 749-00 RKD-M is an NC-compact twin vice which has reversible stepped jaws and a center jaw. It features a large clamp stroke of 50 mm per jaw. The solid steel body of the unit, as well as its guide surfaces, is hardened and ...

This compact self-tightening grip with a capacity of 100 lbF (500 N) is ideal for a range of low force tensile testing of small samples. The serrated steel jaws are easily opened with an ergonomic spring-loaded lever. Features and ...

This slender grip is ideal for testing small and hard-to-reach parts, such as electronic and mechanical components. Use this grip with a force gauge and a test stand to create a complete testing system. Miniature Component Grip For ...

This unique and universal grip is designed for gripping round and irregularly shaped items. Typical applications including pull-off tests of fasteners and components in the toy, clothing, and other industries. Multi-jaw Grip Pull ...

ELECTROHEAD DATA DIRECT DRIVE Motors A Axis stall / max torque: 310Nm; 710Nm C Axis stall / max torque C: 550Nm; 1250Nm Clamping torque Axes brakes A; C: 2000Nm; 4000Nm Max speed Axes A; C: 180° sec ; 180° sec Axis positioning accuracy: ...

HSD Axis Motorors. A Axis max torque: 270Nm; 480Nm C Axis stall/ Max torque C: 270Nm; 480Nm Clamping torque Axes brakes A; C: - Max speed Axes A; C: 75°/sec; 75°/sec** Measuring system accuracy A;C: 60 arcsec; 60 arcsec A;C Axes ...

HS300C ELECTROHEAD DATA HSD Axis Motorors. A Axis max torque: 270Nm; 480Nm C Axis stall/ Max torque C: 270Nm; 480Nm Clamping torque Axes brakes A; C: - Max speed Axes A; C: 89°/sec; 89°/sec** Measuring system accuracy A;C: 60 ...

Machinable collets, square Material: Body aluminium. Wedges carbon steel. Version: Body natural colour anodised. Wedges black oxidised. Note: The lateral clamping screw tightens the jaws and clamps the workpiece on the circumference. The ...

Clamping force: 3.3 kN - 26.7 kN

Fixture clamps machinable Material: Cam screw alloyed steel. Clamping disc steel. Version: Cam screw and clamping disc black oxidised. Note: These fixture clamps have a round washer that can be machined to suit the contour of the workpiece ...

Adapter for collet Material: Carbon steel. Version: nickel-plated. Note: With this adaptor, collets for internal and external clamping can be mounted. The workpiece is clamped by tightening the screw on the side. A dowel ...

The dual vise, manufactured by LAM PLAN, is especially made for various machine tools with a fast tightening system. To obtain a maximum length clamping, the vise consists of a 2 x 2 elements without sole. The width of the jaw is 80mm ...

The Wedge Grip, developed by Mecmesin, is mainly used for tensile testing below 500 N. It is built with compact and lightweight design. The unit is supplied with spring-loaded lever to easily open the serrated jaws for quick securing ...

The 5kN Wedge Grip are a set of highly capacity,self-tightening wedge grips that are specifically designed for the purpose of ensuring a rapid and easy clamping of a wide variety of components and materials. Their capstan action rapidly ...

The name of this device is the MecS622 10 kN Wedge Grip. The new open back design of this device helps in allowing wider samples to be fitted although still be held across the central 34 mm width. The MecS622 10 kN Wedge Grip comes with ...

MADE BY JUARISTI Premium heads Top-of-the-range heads manufactured and tested in our Accuracy Cube JUARISTI has developed a wide range of heads for different types of milling, boring and turning operations. They are in-house manufactured ...

It‘s a situation you know. You run your hand over a piece of furniture and appreciate its shape under your fingertips. One surface feels rough, another feels fine and smooth. There‘s only one thing that can deliver this distinctive feeling: ...

It‘s a situation you know. You run your hand over a piece of furniture and appreciate its shape under your fingertips. One surface feels rough, another feels fine and smooth. There‘s only one thing that can deliver this distinctive feeling: ...

Sanding of surfaces with internal corners ≥90 °: ZUCCO vibrating sanding unit With the SIMOLO eccentric sanding unit, BENZ already has a range with high sanding performance and surface quality, especially for machining small to medium-sized ...

These easy to use half-cell meters measure the condition and potential corrosion of rebars and steel structures within concrete. When corrosion occurs the ferric oxide protective layer surrounding the concrete breaks down allowing ...

Electronic hand wheel EHL The electronic hand wheel EHL is a low-cost motored alternative to the traditional positioning by hand wheel. Special ranges of application are for instance the setting up of linear components in dangerous ...

Overview The ToolingShuttle 30 combines the crimp applicator (tooling), terminal reel and paper winder into one mobile quick-change unit for CrimpCenter 3-series fully automatic crimping machines. The ToolingShuttle 30 allows the operator ...

Max. clamping force: 1,720 N - 17,300 N
Stroke: 8 mm - 12 mm

Clamping force blocks, pneumatic-hydraulic, centric clamping - MAP Technical data - Operating pressure range: 2 - 20 bar - Repeatability accuracy: 0.02 mm - Operating temperature range: from 5°C to 60°C - Operating principle: ...

Max. clamping force: 4,500 N - 55,000 N
Stroke: 4 mm - 30 mm

Clamping force blocks, pneumatic-hydraulic, centric clamping - CFB Technical data - Operating pressure range: 9 bar with air (6 bar per CFB 250) max 60 bar with oil - Repeatability accuracy: CFB 66... 100 0.01 mm CFB 160...200 ...

Max. clamping force: 7,600 N - 55,000 N
Stroke: 2 mm - 15 mm

Clamping force blocks, pneumatic-hydraulic, with fixed jaw - CFB OJ Technical data - Operating pressure range: 9 bar with air (6 bar per CFB 250) max 120 bar with oil; max 6 bar with spring-loaded - Repeatability accuracy: CFB 66... ...

Knob ø 80 Body ø 59,8x22,8 Power supply 5 ÷ 24V Flange- Pulses/rev 100 with detent at each step

Dimensions176x80 Power supply5 ÷ 30V Axis/resolution selectionYes Counter4 digit Stop control deviceYes Push buttons3

Knob ø 89 Body ø 90x53 Power supply 5 ÷ 30V Flange 110 Pulses/rev 100 with detent at each step or 1÷2500 clutched