Diameter: 1 mm - 7 mm
... Collet set ER 11, 13-parted Collet set ER 11, 13-parted, diameters for iSA 500 und iSA900 ...
With a knob diameter of 60 mm, the handwheel allows precise and fast setpoint adjustment. The handwheel does not stop abruptly when the crank or knob is released during a fast turning movement, but runs for a short time. The mechanical detent is clearly ...
... High quality and extremely solid construction - perfection in detail The premium MHO series handwheel is the first choice when other handwheels cannot match the high quality of the application. It is ideal for entering important setpoints in centralized ...
The V, A Series of Tombstone, manufactured by AMF ANDREAS MAIER, is specifically designed with base surface fine-milled. Its clamping surface only faces the pre-milled. This device is also used for a specific customer applications.
ANDREAS MAIER GmbH & Co. KG (AMF)
... Design V: base surface fine-milled. Clamping surface faces pre-milled only, extra tol. for customers finishing. Material: GG25 Alignment hole and centre hole: with hardened bushes in accordance with DIN 179 Base surface : with hole pattern according ...
ANDREAS MAIER GmbH & Co. KG (AMF)
Parallelism: 0.01/200 mm Clamping surface faces: smoothed Hardness: unhardened Material: case-hardened steel Alignment hole and centre hole: with hardened bushes in accordance with DIN 179 with base surface Base surface : with hole pattern according to ...
ANDREAS MAIER GmbH & Co. KG (AMF)
Integral driving center in HSS steel, hardend and grinding for drive Pipe. Other driving centres ø on request.
SASSATELLI
... Driving center with interchangeable head in HSS steel, hardend and grinding for drive Pipe. Other driving centres ø on request. Driving head holder coupling ...
SASSATELLI
... Bidirectional pipe drivers for roughing and finishing. Removable and usable on all four sides. The 45° teeth allow a greater traction coefficient in machining and strongly reduce the pipe deformation. Pipe drivers with interchangeable pins for roughing ...
SASSATELLI
... The SBM 50/450 is the belt magazine to be used together with the BSC 50/450 belt sander to load automatically grinding belt It has a simple and functional design that also includes a sensor to ensure the correct loading of the belt. It is very easy ...
... The drive system allows to power up to 8 machining units with a single motor. Speed range at 50Hz 46 - 9320 min⁻¹ Motor power at 50Hz 3.0 kW Weight 60 / 72 kg depending on the model Color RAL5012 ...
... Product overview:
The Fixar compound sine table with a Neomicro permanent magnetic chuck is designed for precise angle grinding, electrical discharge machining (EDM) and measuring. It enables simultaneous tilting of the workpiece around ...
... Higher productivity through optimised loading and unloading processes
The eurolaser Shuttle Table System enables an optimised material changeover within the laser cutting process. While the machine is operating, material tables ...
... Overview
The FA290 1- and 2-axis milling heads designed and manufactured by HSD are engineered for machining metals and a wide range of industrial materials. They provide C-axis functionality for operations requiring angular indexing and rotation ...
HSD
... Motor brand HSD Axis Motors A Axis Max torque [Nm] 480 C Axis Max torque [Nm] 480 Clamping torque Axis brakes A [Nm] - Clamping torque Axis brakes C [Nm] - Max. speed Axis A [° / sec] 75 Max. speed Axis C [° / sec] 75 Measuring ...
HSD
... Motor brand HSD Axis Motors A Axis Max torque [Nm] 480 C Axis Max torque [Nm] 480 Clamping torque Axis brakes A [Nm] - Clamping torque Axis brakes C [Nm] - Max. speed Axis A [° / sec] 75 Max. speed Axis C [° / sec] 75 Measuring ...
HSD
... Quick•Point® 52/96, 3-face Pyramid
Ø 394 x 150 mm, incl. 3x Quick•Point® 52/96 combi round plate 45480
The 3-face pyramid made of high-strength aluminum offers users optimum accessibility in 5-face machining. This ...
LANG Technik
... Quick•Point®, Tri•Top
3-Face-Tombstone
The Tri•Top returns in a fresh design! With its sturdy steel base body, the popular 3-face tombstone is a guarantee for maximum precision. Despite its robustness, the Tri-Top ...
LANG Technik
... Quick•Point® 52, 3-face Tombstone
192 x 192 x 260 mm
Based on the Quick•Tower clamping tower for horizontal machining centers, the MT3 3-sided clamping tower is an alternative to multiple clamping on smaller 5-axis ...
LANG Technik
Speed: 800 mm/min - 3,300 mm/min
... A proven conveyor solution for a variety of materials, chip types, and chip loads. Hinge belts, the most common conveyor type, can be modified to handle more troublesome waste like tough scrap and heavy parts. FEATURES Overload/jam protection Low-profile ...
HENNIG FRANCE
Speed: 800 mm/min - 3,300 mm/min
... An ideal solution for fine chips and swarf, the scraper belt moves in reverse, collecting and dragging chips up the incline to the discharge end. Standard scraper paddles can be customized with brushes or wipers to suit the application. These conveyors ...
HENNIG FRANCE
Intended for ferrous material applications with chips (40 micron and above),small parts, or scraps. Our closed oil system lubricates all internal partsautomatically, resulting in minimal maintenance, no oil refills, no manually lubricating bearings or ...
HENNIG FRANCE
... Electronic hand wheel EHL The electronic hand wheel EHL is a low-cost motored alternative to the traditional positioning by hand wheel. Special ranges of application are for instance the setting up of linear components in dangerous areas and the operation ...
RUF conveyors can be used to automate material feed or briquette transport in the metal or wood processing industries and in the recycling sector. With these conveyors, the chips or briquettes can be transported automatically to the briquetting machine ...
... • 100 detents per revolution • Wear-free magnetic detent mechanism • 25 pulses per revolution • Ideal for flat machine panels and small, light hand-held pendant stations like the housing HBA/HBM• Suitable for installation in universal turning and milling ...
... • 100 detents per revolution • Wear-free magnetic detent mechanism • 25 pulses per revolution • Flat design• 100 detents per revolution • Wear-free magnetic detent mechanism • 100 or 25 pulses per revolution • Flat design ...
... • 100 detents per revolution • Wear-free magnetic detent mechanism • 25 pulses per revolution • Installation in operator panels and EUCHNER hand-held pendant stations series HBL ...
... Magna-Rolls are constructed in several types with a flat surface or crowned. Contoured and special faces for specific jobs are available, as well as single and multiple gap units. Virtually any diameter from 2-1/2" (63 mm) and up can be supplied in ...
Eriez Magnetics Europe Limited
... Safely and reliably move and elevate ferrous materials such as chips, turnings, small parts and stampings from a sump to a discharge. These units are practically maintenance-free and innovatively designed to ensure the highest level of operator safety. Most ...
Eriez Magnetics Europe Limited
Flow: 4 l/min - 12 l/min
Weight: 136.4 kg
Eriez offers three low cost coalescers that process machine tool fluids removing tramp oils and fines and returining clean, reusable coolant. These units pump dirty fluid into a tank designed with baffles, weirs and media plate packs (portable coalescers) ...
Eriez Magnetics Europe Limited
... Conveyor belts for the feeding of our size reduction machines (shredder, granulators,...) & for the transport of the size reduced material (granulates) to the following machines (like silo,...) ...
for the conveying of the size reducted material (like granules, bottle flakes, film flakes) after the washing process
The Combi-CLL Log Loader, is a game-changer in how we handle and load logs into containers. It’s all about speed, efficiency, and most importantly, safety. Designed specifically to tackle the tricky demands of the forestry industry, the Combi-CLL is making ...
... Suitable for loading any material into containers. • Capacity: 30,000 kg • Height: 626 mm • Overall Length: 16560 mm • Width: 3250 mm • Container Frame Length: 9780 mm • Motor: 37 kW 3 Phase • Hydraulic Stroke Mechanism: 13600 mm • Container Sizes: ...
... For direct or comparative, internal or external measurements • MEASUREMENT - Internal or external - Direct or comparative - No need for expensive setting standard thanks to the included standard - Constant measuring force for optimal repeatability • ...
These heavy duty self-tightening grips with a capacity range of 200 lbf to 2000 lbF (1 kN to 10 kN) are ideal for tensile testing of a wide range of materials. The serrated steel jaws ride on rollers instead of sliding along the surface of the housing, ...
Mark-10
... This compact self-tightening grip with a capacity of 100 lbF (500 N) is ideal for a range of low force tensile testing of small samples. The serrated steel jaws are easily opened with an ergonomic spring-loaded lever. Features and specifications •100 ...
Mark-10
... This slender grip is ideal for testing small and hard-to-reach parts, such as electronic and mechanical components. Use this grip with a force gauge and a test stand to create a complete testing system. Miniature Component Grip For a variety of small ...
Mark-10
... Common applications The TAKTOMAT transport systems are mainly used in the automotive industry. Features and user benefits • Lifting / lowering conveyor for accurate positioning transportation of large components with • a weight of 750 kg of machining ...
... The small, lightweight Wedge Grip is ideal for tensile testing below 500 N. A spring-loaded lever ensures the serrated jaws (16mm wide x 20mm high) are easy to open for fast securing and release of samples. As load is applied, the self-tightening action ...
Mecmesin
... The 5 kN Wedge Grip is ideal for tensile testing of flat and rigid materials, including plastics, rubber and light metals. A spring-loaded lever ensures the serrated jaws (25mm wide x 32mm high) are easy to open for fast securing and release of samples. ...
Mecmesin
... Lever-action wedge grip with it's lever being positioned at the front for easy operation. The open back of this wedge grip allows wider samples to be fitted, although still held across the central 34 mm width. Supplied as body only with QC-20mm connection. ...
Mecmesin
Max. clamping force: 4,000 N - 50,000 N
... HIGH CAPACITY VICE up to 280 mm with no limitation with divided vice COMPACT several vices can be used together for multiple clamping HIGH CLAMPING POWER up to 22 000 Newtons (2.2 TONNES for 5 M/kg) WORKPIECE CENTRED ON THE TABLE via the indexed ...
Max. clamping force: 22,000 N
... DIVIDED VICE CAPACITY adapts to workpiece dimensions INCLUDING 2 Base plates : 09-016 height 28 mm 1 moveable indexable jaw : 09-025 clamping range 16 mm 1 fixed indexable jaw : 09-080 width 60 mm ...
Max. clamping force: 4,000 N - 50,000 N
... Allows simultaneous clamping of several workpieces of different sizes or shapes in the same vice. FORCE can be adapted in seconds to any type of vice (from 100 to 200 mm) and is the ideal accessory for all types of mechanical, pneumatic or hydraulic ...
... The ELECTROCLASS SupplyPoint automatic vending machine is the secure distribution range solution for: • Managing your references optimally • Simplifying and securing distribution of all your sensitive references • Preventing stockout This solution ...
... The ELECTROCLASS LockerBox secure vending machine is the secure distribution range solution for: • Optimizing your equipment management and increasing your productivity • Securing your stock and keeping track of your assets • Improving your equipment's ...
... SPS vending machine • The ELECTROCLASS SupplyPoint automatic vending machine is the secure distribution range solution for: • Managing your references optimally • Simplifying and securing distribution of all your sensitive references • Preventing ...
... Taper clamping units are particularly suitable for horizontal and vertical multiple clampings. The taper clamps are compact in build and therefore enable clamping without geometric interference. Material Body Tool steel, hardened, bright Screw Heat-treated ...
HALDER France
Max. clamping force: 40 kN - 40 kN
Max. clamping range: 62 mm - 443 mm
The all-round clamping system is a classic for conventional clamping and gripp clamping. It is suitable for all common milling. Clamping of unmachined parts, saw-cut or flame-cut material by penetration of hardened, replaceable gripper elements into the ...
HALDER France
... Material Steel, case-hardened, ground Notes RoHS compliant REACH compliant Free of conflict minerals ...
HALDER France
... Magnetic sheet floaters Magnetic sheet floaters are used for lifting steel sheets from a pile and holding them suspended in the air. The sheets are separated from each other by positioning magnetic blocks specially designed for this purpose at one or ...
SELTER
... 3-sided magnetic block, 2 of which have a 'V' of 90º. Totally watertight. ...
SELTER
... They contain neodymium magnets. Maximum temperature: 60ºC ...
SELTER
S60-FA610 facing head slider transmission is designed with linear rails and a ball screw grade C5 which are incorporated with a servo motor. The roundness of spindle nose is within 0.002mm and repeatability of facing head slider is within 0.01mm. This ...
S80-FD880 facing head slider transmission is designed with linear rails and a ball screw grade C5 which are incorporated with a servo motor. The roundness of spindle nose is within 0.002mm and repeatability of facing head slider is within 0.01mm. This ...
FMDM155 Built-in motor spindle with facing head is designed of a ball screw grade C5 driven which are incorporated with a servo motor for feeding. The roundness of spindle nose is within 0.002mm and repeatability of facing head slider is within 0.01mm ...
Max. clamping force: 23 N - 40,000 N
Max. clamping range: 32, 37, 116 mm
... Mechanical centre-clamping vises MZX The centre-clamping vise series MZX is used as a powerful, universal and reliable clamping device on zero-point systems. The base body of the vise is provided with system holes suitable for LANG or market competitors, ...
Spreitzer GmbH & Co. KG - Präzisionswerkzeuge
Max. clamping force: 50,000, 40,000, 30,000, 16,000 N
Max. clamping range: 19 mm - 114 mm
The mechanical self-centering vises of the MZR series are cost-effective clamping devices for raw part machining on multi-axis machining centers and automated manufacturing systems. The compact design provides excellent accessibility to the workpiece, ...
Spreitzer GmbH & Co. KG - Präzisionswerkzeuge
Max. clamping force: 5,000 N - 70,000 N
Max. clamping range: 12 mm - 178 mm
The mechanical self-centering vises of the MZE series are powerful and cost-effective clamping systems designed for use on multi-axis machining centers and automated manufacturing systems. The compact design ensures excellent accessibility to the workpiece, ...
Spreitzer GmbH & Co. KG - Präzisionswerkzeuge
For OD clamping with Form Holding Clamps (CP125). The jaws are machined to receive a workpiece. When the clamp is tightened, the center of the jaws is pulled down, tilting the jaw sections toward the center. The clamping stroke of each jaw section is ...
Fixtureworks
... For ID clamping with Form Holding Clamps (CP125) using a Tapered Screw (127-B). When the tapered screw is pulled down by the cam cylinder, jaws are expanded outward to clamp the workpiece on the OD. The clamping stroke of each jaw is 0.15 mm. Furnished ...
Fixtureworks
... Description
These backstops provide downholding force and prevent part lift in industrial fixturing and clamping applications. They include two spherical washers compatible with both M12 and M16 screws. The body is cast iron with a black powder ...
Fixtureworks
... TCH 13 H is the most compact two-axis head with a fork structure offered by Technai Optimal price-performance-precision ratio, accepts electric spindles with a body of up to D 180mm with a torque range of 35 -: - 60 Nm Designed to excel in mould finishing, ...
Technai Team S.p.A.
... TCH 15 H is the medium-small sized two-axis head with technical contents that reflect the state of the art and the experience of Technai in the design of Direct Drive heads. The structure is fork-shaped with a double motor on the A axis – perfectly ...
Technai Team S.p.A.
... Two axis head with fork structure optimized for 5-axis machines, integrated modules with Technai Direct Drive motors on both axis, available with electrospindles up to 24.000 rpm and 42-60 kW, HSK-A63 or HSK-A100 tool holder. TCH 20 head is designed ...
Technai Team S.p.A.
The WDW Series Computer Control Electronic Universal Testing Machine is being widely utilized for the purpose of doing tension, compression, flexure/bending and shearing of different type of specimens. It suitable to be used in metal and non-metal materials ...
Andlilog's Mini Self-Closing Wedge Clamps are used for fast, clamping operations on a wide range of materials. They are available with either standard diamond-cut jaws, or other jaw types for different components. The MAC500 model is suitable fpr tensile ...
... The double clamping vices have a completely compensating mechanism (until zero), therefore it is possible to clamp 2 pieces of different sizes. IMG vices have a fully protected operating screw with a patented telescopic system. This innovation makes ...
OML
... Dimensions176x80 Power supply5 ÷ 30V Axis/resolution selectionYes Counter4 digit Stop control deviceYes Push buttons3 ...
ELCIS ENCODER
... Scale divisionn value 0,001mm measurement span 1mm, 1 indicator rotation 0,2mm, Starting measuring force 0,7 N±10%, ø58mm, DIN EN ISO 463 ...
HEXACON
The adjustable multispindle heads TSI and TSX series with two parallel or convergent spindles are suitable to mill and to chamfering the gear teeth. Special care has been taken with the spindles bearing layout, because the hard metal tools are also used ...
OMG
James Instruments Gecor 8™ represents the latest technology in steel reinforcing bar corrosion rate determination. It combines state of the art embedded microprocessor systems and computerized flash technology with the world's leading research in reinforcing ...
Max. clamping force: 0 kN - 40 kN
Max. clamping range: 120 mm
Weight: 26.1 kg - 59.7 kg
Product overview The GRESSEL C5X centric clamp is engineered for modern 5-axis CNC machining. Its compact footprint, high clamping force and excellent accessibility make it suitable for 5-axis machines with or without pallet automation. The C5X ...
GRESSEL
... The M5S features a cast iron body and symmetrical fork structure providing optimal thermal stability. The two tandem motors solution for controlling the A and C axes guarantees an absence of backlash and is maintenance-free. High torque hydraulic brakes ...
FIDIA
Max. clamping force: 20 kN
Max. clamping range: 155 mm
Weight: 8.931 kg
... 5-axis self-centering precision machine vise with replaceable jaw inserts. Designed for accurate clamping of workpieces on machining centres and milling machines. Steel body, metric sizing and precision accuracy class. Details SKU (page): 326650030100 Product ...
Bison S.A.
V-Blocks are work holding tools that improve an operators ability to properly hold down a work piece. The sides, base, and contact surface must be precision ground so that the work piece can have reliable and sometimes repeatable reference surfaces on ...
STARRETT
... - It is able to perform heavy cuts in all kinds of materials. - Designed to work with 52 kW and 1375 Nm in S1. - Completely cooled with water. - 6000 rpm with no limitations. - Correa patented system ...
NICOLAS CORREA