- Power Transmission - Mechanical components >
- Motor and Motor Control >
- Other motors and accessories
Other motors and accessories
Power: 0.75 kW - 200 kW
Rotational speed: 1,000, 3,000, 1,500 rpm
Operating temperature: -15 °C - 40 °C
SCZ Series permanent magnet assisted synchronous reluctance motors use ferrite to generate permanent magnet auxiliary torque and take reluctance torque as the main driving torque. The motors have the characteristics of high power density ...
Shandong Sunvim Motor Co., Ltd.
Power: 0.75 kW - 1,000 kW
Intensity: 0.9 A - 672 A
Torque: 2.5 Nm - 2,581 Nm
SUNVIM IE4 electric motors are manufactured according to international standard IEC60034-30-1:2014. All IE4 motors are manufactured with premium grade silicon steel, low harmonics winding, low noise and low friction bearings, low wind ...
Shandong Sunvim Motor Co., Ltd.
Power: 0.75 kW - 375 kW
Intensity: 1.6 A - 674 A
Torque: 2.5 Nm - 3,039 Nm
SUNVIM IE3 electric motors are manufactured according to international standard IEC60034-30-1:2014. All IE3 motors are provided with premium quality cold-rolled silicon steel, low harmonics winding, VPI vacuum pressure impregnation and ...
Shandong Sunvim Motor Co., Ltd.
Torque: 21.6 Nm - 42,900 Nm
Rotational speed: 143 rpm - 4,590 rpm
Diameter: 160 mm - 1,288 mm
TMB+ is an evolution of the renowned TMB Torque Motor that provides a combination of increased performance and new features while maintaining the interfaces of existing motors. In fact, the torque density of TMB+ is increased by up to ...
ETEL S.A.
Torque: 80.5 Nm - 20,800 Nm
Rotational speed: 674 rpm - 5,450 rpm
Diameter: 198 mm - 1,050 mm
The TMK torque motor range is a unique design redefining the working range of torque motors in the industry. The advanced electromagnetic design of TMK motors allows them to reach speed levels that were totally unsuspected for torque ...
ETEL S.A.
Torque: 24.5 Nm - 4,990 Nm
Rotational speed: 110 rpm - 1,000 rpm
Diameter: 210, 290, 360, 450, 530 mm
The TML torque motor is a low weight and low cost version of the famous TMB motor. This motor range is perfectly suited for applications that require the dynamic performance level of a direct drive torque motor while being less demanding ...
ETEL S.A.
Gr.2-motors are on stock Wide range of Hydraulic Motors, many models and with large variety of characteristics. We can: • - offer advice and guidance to replace the Hydraulic Motor you use today • - replace almost any Hydraulic ...
Power: 0.13 kW - 22 kW
Intensity: 1.5, 2, 3.4, 1.8, 3.3 A
Torque: 1.2 Nm - 70 Nm
EC (Electronically Commuted or Electronically Controlled) motors refer to such electrical engines equipped with permanent magnets rotor and controlled by an inverter drive which tunes voltage and current applied to the motor.
Simotop group
Power: 160 kW - 12,000 kW
Intensity: 15 A - 3,200 A
Torque: 500 Nm - 508,000 Nm
ELOM Squirrel Cage motors which use steel box-type structure are with squirrel cage rotor and bar winding.The motors have the advantage of light weight, good rigidity, low temperature rise and convenient installation Frame Including: ...
Elom Motor
Power: 160 kW - 3,200 kW
Rotational speed: 500 rpm - 3,600 rpm
Y2 rib cooling high voltage cast iron motor have a rugged cast iron frame. They are rib cooled motors with IC411 cooling and IP55 protection as standard. The motors are also available with IC416 cooling and optional Frame Including: ...
Elom Motor
Power: 160 kW - 16,000 kW
ELOM Squirrel Cage motors which use steel box-type structure are with squirrel cage rotor and bar winding.The motors have the advantage of light weight, good rigidity, low temperature rise and convenient installation and maintenance. ...
Elom Motor
Power: 0.12 kW - 45 kW
Rotational speed: 3,000, 1,000, 1,500 rpm
SERMES
Power: 0.75, 315, 250, 200 kW
Rotational speed: 1,000, 1,500, 750, 3,000 rpm
Diameter: 158 mm - 700 mm
SERMES
Power: 0.18, 0.12, 45, 30 kW
Rotational speed: 1,000, 1,500, 3,000 rpm
Diameter: 123 mm - 465 mm
SERMES
Power: 120 W
Torque: 0.0439 Nm
Rotational speed: 2,000 rpm - 3,500 rpm
48V 120W DC Brush Motor Category: Custom DC Brush Motor Voltage: 12-48 V DC Power: 120W Dimension: Φ101 ×198mm Noise: ≤69db Product Description Products name : 48V 120W DC Brush Motor Dimension : Φ101 ×198mm Noise : ≤69db Iput ...
Ningbo BG Motor Factory
Power: 0.19 kW - 1.63 kW
Torque: 2.1 Nm - 4.8 Nm
Rotational speed: 700 rpm - 4,000 rpm
Asynchronous motors shaft height 63 mm, IP54, IC410
COMER S.r.l.
High current carbon brushes suitable for mounting in linear adjustable telescopic holders Special material qualities are required to ensure the lowest possible loss of current transmission. The standard qualities we use are produced ...
Intensity: 1.1 A
Torque: 1.2 Nm
Rotational speed: 3,000 rpm
• Our smallest motor, HDD 09E, with a rated speed 3000 rpm, rated torque 1,2 Nm at a rated current 1.1A and the ultra compact length of 47,3 mm. • For shorter accelerations you get a peak torque of 3.1 Nm at a current of 3A. • Weight ...
HDD Sweden AB
Intensity: 2.05 A
Torque: 1.05 Nm
Rotational speed: 6,000 rpm
• Our smallest motor, HDT 09E, with a rated speed 6000 rpm, rated torque 1,05 Nm at a rated current 2.05A and the ultra compact length of 47,3 mm. • Weight is only 1,7 kg. • Resolver, Hiperface, EnDat protocol and a number of drive ...
HDD Sweden AB
Intensity: 2.3 A
Torque: 2.5 Nm
Rotational speed: 3,000 rpm
• Our most sold motor , HDD 09J, with a rated speed 3000 rpm, rated torque 2,3 Nm at a rated current 2.3A and a compact length of 59,6 mm. • Weight is only 2,4 kg. • Resolver, Hiperface, EnDat protocol and a number of drive compatible ...
HDD Sweden AB
NEMA size 8 PLM Linear Actuator Stepper Motor Models Features: - Eliminates additional shaft couplings - Reduced tolerance stack-up - Improves performance - Customizable to unique requirements - External linear (rotating shaft) - ...
OMS Motion, Inc.
NEMA size 14 PLM Linear Actuator Stepper Motor Model Features: - Eliminates additional shaft couplings - Reduced tolerance stack-up - Improves performance - Customizable to unique requirements - External linear (rotating shaft) - ...
OMS Motion, Inc.
NEMA size 14 PLM Linear Actuator Stepper Motor Model Features: - Eliminates additional shaft couplings - Reduced tolerance stack-up - Improves performance - Customizable to unique requirements - External linear (rotating shaft) - ...
OMS Motion, Inc.
Power: 3.7, 2.2 kW
Intensity: 15.2 A - 101 A
Torque: 7.3 Nm - 17.6 Nm
Franklin Electric 4" encapsulated submersible high thrust motors, built in ISO 9001/14001 certified facilities for outstanding performance in 4" or larger water wells. The single phase high thrust 3-wire motor has been designed for highest ...
Franklin Electric
PRM provides the quickest and the most convenient, as regards installation and configuration, digital or analog I/O extension for the PR200 Programmable Relay from akYtec. This module connects to the PR200 base unit directly over the ...
Power: 4.1 W - 10.2 W
Intensity: 0.76 A
Torque: 0.0101 Nm - 0.0113 Nm
・High output The rotor uses Nd magnets. The stator was designed for maximum output per unit volume to maximize winding. ・Long service life Since these are brushless motors, the only limit to service life is how long the ball bearings ...
CITIZEN CHIBA PRECISION CO., LTD.
Power: 10.2, 9, 4.1 W
Intensity: 1.17, 0.6 A
Torque: 0.0101 Nm - 0.0113 Nm
・High output The rotor uses Nd magnets. The stator was designed for maximum output per unit volume to maximize winding. ・Long service life Since these are brushless motors, the only limit to service life is how long the ball bearings ...
CITIZEN CHIBA PRECISION CO., LTD.
Power: 7.8 W - 8.7 W
Intensity: 0.73 A
Torque: 0.006 Nm - 0.0092 Nm
・High output The rotor uses Nd magnets. The stator was designed for maximum output per unit volume to maximize winding. ・Long service life Since these are brushless motors, the only limit to service life is how long the ball bearings ...
CITIZEN CHIBA PRECISION CO., LTD.
Power: 2 W
Intensity: 69 mA - 3,100 mA
Torque: 0.0013, 0.0015, 0.0069, 0.0044 Nm
Vishan motor group is always well prepared to delivery our best service via such downsize and optimize brushless slotless DC motor, our Efficient work will assistant you to find the right solution from our products. Configuration: ...
Vishan Motor
Power: 4 W
Intensity: 72 mA - 7,550 mA
Torque: 0.003, 0.0166, 0.0165, 0.0167 Nm
Vishan motor group is always well prepared to delivery our best service via such downsize and optimize brushless slotless DC motor, our Efficient work will assistant you to find the right solution from our products Configuration: ...
Vishan Motor
Power: 4 W
Intensity: 100 mA - 4,440 mA
Torque: 0.0199, 0.0035, 0.0182, 0.0205 Nm
Vishan motor group is always well prepared to delivery our best service via such downsize and optimize brushless slotless DC motor, our Efficient work will assistant you to find the right solution from our products. Configuration: • ...
Vishan Motor
Power: 0.5 kW - 10 kW
Torque: 5.4 Nm - 17,300 Nm
Rotational speed: 3 rpm - 2,000 rpm
MK-CI Torque Motors are defined as standard because they have a configuration and size equivalent to products available from other suppliers on the market. Available in 14 sizes, with nominal stator diameter of between 93 mm and 1,220 ...
Technai Team's CHR 50/63 Servo-Actuator for Drive-Nuts deliver rational feedback to drives, for heavy-duty axes of industrial machine tools. These actuators are generally utilized for spindle shaft support applications at either ends, ...
Device that allows to get up to 3 signals from thermocouples. Input are insulated and it’s possible to contemporary connect different types of thermocouples. This device is able to Connect three independent thermocouples, galvanically ...
S.I.C.E.S.
Current: 6, 12, 22, 32 A
Power: 1.2, 2.3 kW
The STB soft starter is designed to smoothly start (and stop) 3 phase induction motors. By employing a timed voltage ramp system you have greater control over soft-start and soft-stop performance reducing energy costs and enhancing the ...
Power: 0.75 kW - 315 kW
Intensity: 54.2 A
Torque: 2 Nm
YE4 series ultra efficiency TEFC 3-phase electric motor , low noise, low vibration with reliable performance ,and are much fit for lowering noise and ventilation, Insulation class F,protection degree IP55, working duty S1, cooling method IC411
Dalian Dalmo Electric Motor Co. Ltd
Power: 0.55 kW - 315 kW
Intensity: 54.5 A
Torque: 119 Nm
In twentieth Century, Chinese infrastructure and rapid development of real estate industry, construction by leaps and bounds, transportation facilities, city construction, rural reconstruction, real estate construction is the only way ...
Dalian Dalmo Electric Motor Co. Ltd
Power: 1.5 kW - 200 kW
Intensity: 4.25 A - 490 A
Torque: 539 Nm
YZ, YZR series metallurgy and start up and reuse three-phase asynchronous motors are suitable for driving electric drive of all kinds of hoisting machinery and other similar equipment, with high overload capacity and high mechanical strength. ...
Dalian Dalmo Electric Motor Co. Ltd
Power: 9.2 kW
In addition to the complete solution, consisting of gearbox and electric motor, our product range includes standard three-phase motors and single-phase motors as well as brake motors, ATEX motors and special motors according to customer ...
Rehfuss Drive Solutions GmbH
EPM electrolytic starter can be used to start slipring motors from 500 kW to 20,000 kW. It will supply the power necessary to drive the motor by resistance variation. Designed for controlled starting and speed control of large slipring ...
AOIP
Current: 110 A - 1,300 A
Power: 30 kW - 750 kW
RLV vapormatic starters are used when the driven machines are of great inertia or when the rating power of starting / driven machine is low. They have the following advantages: Reliability - No moving parts other than the short ...
AOIP
Current: 16 A - 1,158 A
Power: 4 kW - 670 kW
The soft starter NOVADEM S3 (NS3) is designed to control all aspects of starting, stopping and protection of 3 phase squirrel cage motors up to 1200 kW at 690 V. These high performance digital starters offer a user interface that supports ...
AOIP
Power: 40, 100 W
Intensity: 4 A
Torque: 2 Nm
Direct wheel drive, roller conveyors and turntables. High torque at low speed, special solutions on request Field of application: - Direct drive of wheels, roller conveyors - Turntables - High torque at low speed Advantages ...
Kern Antriebstechnik GmbH
Power: 40 W - 500 W
When high-precision and 100% accuracy is required motors with positioning accuracy in the micrometer range, DA series prove their worth. With a compact space-saving build and relatively cogging (detent torque) free operation, DA series ...
Kern Antriebstechnik GmbH
Power: 50 W - 500 W
The GM Series manufactured by KERN is a type of a motor equipped with a precise turn run. Additionally, the precise true run of this device is operated with a flexible spectrum. This device is applicable for a wide range of applications ...
Kern Antriebstechnik GmbH
Power: 0.075 W - 7.6 W
Torque: 0.3 Nm - 10 Nm
Rotational speed: 3,000 rpm
Are especially suitable for compact machines due to their small size. They offer high performance in precision and dynamics. 5 sizes available Sinusoidal switching Low inertia Absolute encoder feedback, resolver Parking brake Cable output
SERAD
Power: 0.09 kW - 7.5 kW
Rotational speed: 1,000 rpm - 25,000 rpm
Diversity is the key with hamatic compact drives. Customer requirements are as diverse as the product portfolios are. Which is why the name hamotic compact combines frameless synchronous and asynchronous drives of various designs. At ...
HANNING
Gear ratio: 62 unit
Gearmotor MR42: DC gear motors with permanent magnets 12 and 24 Volt. Further details such as parts’ images, nominal voltage, no-load speed and output power, are available on the technical data sheet. TECHNICAL DATA Nominal Voltage ...
OSLV ITALIA
Gear ratio: 55, 53, 69, 44 unit
Gearmotor MR62-31: DC gear motors with permanent magnets 12 , 24, 36 and 48 Volt, with starting torque up to 40 Nm. Further details such as parts’ images, nominal voltage, no-load speed and output power, are available on the technical ...
OSLV ITALIA
Gear ratio: 63, 78 unit
Gearmotor MR62-35: DC gear motors with permanent magnets 12 , 24, 36 and 48 Volt, with starting torque up to 45 Nm. Further details such as parts' images, nominal voltage, no-load speed and output power, are available on the technical ...
OSLV ITALIA
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining