Other motors and accessories

Power: 9.2 kW

... In addition to the complete solution, consisting of gearbox and electric motor, our product range includes standard three-phase motors and single-phase motors as well as brake motors, ATEX motors and special motors according to customer requirements. Three-phase ...

Power: 26 W - 4,400 W
Torque: 0.0625 Nm - 20 Nm
Rotational speed: 1,600 rpm - 6,000 rpm

... AC/DC esiMot “all-in-one” decentralized servo drive 120 W to 4.4 kW S3 power with integrated power electronics. Fieldbus connection: Profibus-DP, Profinet-DP, CANopen, EtherCAT or Modbus serial, each electrically isolated. Digital 4Q controller, ...

Zaber’s new product, the X-NMS-E Series, simplifies motion control by incorporating a built-in controller and motor encoder. Capable of over 25,600 microsteps per revolution and up to 2650 rpm, this compact stepper motor includes a detachable home sensor ...

Power: 0.73 kW - 7.12 kW
Intensity: 1.17 A - 13.3 A
Torque: 14 Nm - 816 Nm

Our new KTY series of housed synchronous torque motors not only sets a new benchmark with regard to maximum drive system torque and stiffness, but they are also extremely compact. The KTY series is a useful alternative to geared motors in any application. ...

... Expansion module 5NO+1NC Functions: Expansion module, 5NO+1NC+(1NC feedback) outputs (CS ME-01) Terminals: Plug-in connectors with screw terminals (4) Supply: 24 Vac/dc ...

Power: 0.19 kW - 1.63 kW
Torque: 2.1 Nm - 4.8 Nm
Rotational speed: 700 rpm - 4,000 rpm

Asynchronous motors shaft height 63 mm, IP54, IC410

LENNIX® Pro for industrial cranes is a control and regulation system which enables cranes to position their loads quickly and to reduce the risk of collision. It independently eliminates the unavoidable oscillations that occur while the crane is in operation. ...

Power: 0.13 kW - 22 kW
Intensity: 1.5, 2, 3.4, 1.8, 3.3 A
Torque: 1.2 Nm - 70 Nm

EC (Electronically Commuted or Electronically Controlled) motors refer to such electrical engines equipped with permanent magnets rotor and controlled by an inverter drive which tunes voltage and current applied to the motor.

Power: 6 W - 60 W
Rotational speed: 900 rpm - 1,650 rpm

... Wild range of AC induction motors work with brake, speed reducer and control circuits are available to various automation applications depending upon different power supply. Product Applications: ．Machine Tool Accessories ．Cutting Equipment ．Bar ...

Power: 0.07 W - 7.6 W
Torque: 0.3 Nm - 10 Nm
Rotational speed: 3,000 rpm

... Are especially suitable for compact machines due to their small size. They offer high performance in precision and dynamics. 5 sizes available Sinusoidal switching Low inertia Absolute encoder feedback, resolver Parking brake Cable output ...

... Product properties - Universal expander module for: MultiCONT process controller, automated systems operating on RS485, PLC process control systems - RS485 communication - 4 – 20 mA current outputs - Programmable relay outputs Applications - ...

RU-87Pn series is a remote intelligent I/O expansion unit to expand I-87K series I/O modules over the RS-485 for industrial monitoring and controlling applications. The unit supports more than 30 I/O modules including analog input/output, digital input/output, ...

Power: 30 kW - 400 kW
Intensity: 40, 80 A
Rotational speed: 4,000 rpm - 6,500 rpm

... 1. Evolved Servo Performance High responsiveness and effective vibration suppression enable fast, precise control, enhancing the productivity and processing quality of equipment. compared to our conventional products : • Speed frequency response: ...

Gear ratio: 4, 256, 64, 16, 1,024 unit
Operating temperature: -10 °C - 60 °C
Rotational speed: 204, 51.4, 12.7, 3,270, 835 rad.min-1

... Gear motor is a generic name that a motor and a gearhead are combined. Basically, a motor has higer speed(our standard one has 2,600 mini-1～16,500mini-1). However when the customer want to use on the application, there many cases that lower torque is ...

Power: 0.18 kW - 37 kW
Torque: 0.7 Nm - 159 Nm
Rotational speed: 3,600, 1,800 rpm

... PACKAGED PM MOTOR AND DRIVE - IE5 • Plug & Play solution • Total speed control • IP66 / NEMA 4X outdoor • Three package configurations HP Combi is two-in-one, an innovative marriage between a permanent magnet synchronous motor and a variable ...

Intensity: 0.5 A - 10 A
Torque: 78 Nm - 1,260 Nm

Bimba’s family of DC stepper motors are available in NEMA 23 and NEMA 34 sizes and are designed to work optimally with Bimba DC Stepper Drives. With features that include high torque, high bus voltage and microstepping performance, and versions that accept ...

Power: 50 W - 3,000 W

... · Self-tuning, saving 90% of the equipment debugging time · Speed loop bandwidth 3.5kHz · Current loop refresh rate 1MHz · With three-way 16-digit analog command entered, the change in 2 mv voltage can be distinguished and the control precision can ...

Metric stainless steel keystock is produced from A2 stainless steel to undersized specifications. Size is clearly marked on each piece. Precision Brand Metric Stainless Steel Keystock is an excellent alternative to steel keystock when corrosion resistance ...

... is a fast and simple way to expand the capabilities of Eurotech Multi-service IoT Edge Gateways with extra digital and analog ports. Industrial Grade - Compact and sturdy, with reliable terminal block interfaces and a wide operating temperature range ReliaGATE ...

Rotational speed: 360, 600, 960 rpm

... closed loop stepper motor system offers accurate and precise position control through feedback from integrated encoders. The motors feature quick response rates for ideal short pitch drive. Gain tuning is easy with the external gain adjuster. Main ...

Power: 230 W
Torque: 3.3 Nm
Rotational speed: 2,000 rpm

The ECOMPACT® 100 is a decentral servo drive with an integrated servo amplifier. The modular design of the device enables rapid customer-specific adaptation. Options such as, sensorless operation, holding brake, connection of an internal or external measuring ...

... 4 Linear Inputs 16 Bit, 2 Analog Outputs 12 Bit. Features Designed to integrate with FL series based PLCs seamlessly. Easily installable Plug-and-play connectivity Inputs are Configurable and Fully Scalable Ensures ...

Intensity: 6 A
Torque: 4.6, 8.5 Nm
Operating temperature: -20 °C - 50 °C

1.8 °, 86mm, NAME 34, STD structure hybrid stepper motor

Power: 0 W - 330 W
Torque: 0 Nm - 1.56 Nm
Rotational speed: 0 rpm - 2,850 rpm

... AC-/ Asynchronous motors 2- and 4-pole with fan IGLC 100-60 AC Motors (housed) standard P: up to 330 W n: up to 2850 min-1 UV: 230 V — 400 V M: up to 156 Ncm ...

... ESP/ABS MOTOR * Motor classes 2 & 3 available * 4-pole design with two or four brushes * Endurance lifetime up to 800 hours * RFI integration optional * Next generation: - Very compact design (D=76mm, L=35mm) - Weight reduction of 30% ...