Metal profiles, Modular structure profiles

Width: 40 mm
Height: 27 mm

MB Building Kit System Particularly large! Groove Plate X 8 can be used to build large, strong working surfaces or entire walls with precisely spaced end-to-end grooves covering the entire surface area. Exceptionally strong! Thanks ...

Height: 2,000 mm

Cover profiles Al Dust-tight and easy to clean For covering cables running through the groove Display: Sort by: Show: Compare products (0) Cover Profile 6 Al, natural 0.0.439.70 Cover Profile 6 Al, naturalDelivery unit 1 ...

Width: 30 mm
Height: 8,300 mm

Struts Strong support. Increases load-carrying capacity Reduces profile deflection Supporting struts for angled connections between profiles. Display: Sort by: Show: Compare products (0) Diagonal Strut Set 8 300x30

Width: 6.5 mm
Height: 10 mm

DescriptionMaterial:PVC.Version:black.Note:The edge protection profiles are used to cover and decorate the sharp edges of cut plate so that no additional processing is required. Assembly:Easy, quick and smooth assembly. The edge protection ...

Flexible profile system Mechprofile TM comprises a product series of anodized aluminium profiles and accessories with many areas of use. Just as in a big Meccano set, there are components for all conceivable needs. Standardized components T-tracks ...

A Din rail is a metal strip of standard dimensions originally defined in specifications published by DIN (Deutsches Institut für Normung) in Germany, and since adopted as European (EN) and international (ISO) standards. It is made from ...

From the trusted RS PRO brand, a selection of robust TS-35 standard DIN rails used for mounting various electrical and industrial equipment. The TS-35 rail or Top Hat as it is also known is manufactured from cold rolled steel which is ...

From the trusted RS PRO brand, a selection of robust TS-35 standard DIN rails used for mounting various electrical and industrial equipment. The TS-35 rail or Top Hat as it is also known is manufactured from cold rolled steel which is ...

Width: 10 mm - 1,000 mm
Height: 0 mm - 320 mm

Welser metal sections are rollformed open sections, closed section tubes, components and complete profile systems made of steel or non-ferrous metals. In close cooperation with our customers, we develop and manufacture custom-tailored ...

Width: 10 µm - 1,000,000 µm
Height: 0 µm - 320,000 µm

Welser metal sections are manufactured with a clean, precise cut edge as well as tight tolerances.

Width: 10 mm - 1,000 mm
Height: 0 µm - 320,000 µm

Welser metal sections are made of various metals; hot rolled strip, cold reduced strip, chromium nickel steels and non-ferrous metals, self colour or with a range of surface finishes including pre hot dip galvanised, electrolytically ...

Width: 12 mm - 36 mm

Schock Metall specializes in cold-rolled profiles made to specific customer specifications. They are manufactured using a broad range of different technologies, from special profiles and pre-configured assemblies to complete system solutions. ...

The instrument is made from Stabilized GJL250 grey cast iron or ENAW-707.

Width: min 6.0 mm

Aluminium profiles 40x40 for roller rails, Type I Description Material: Aluminium EN AW-6063 T66 (AIMgSi 0.5 F25) Version: Artificially aged, natural colour anodised. Note: The aluminium profile is matched to the roller elements. ...

Width: 6 mm

Aluminium profiles 30x30 light Type I The aluminum profiles are natural anodized and therefore permanently scratchresistant and corrosion proof. The circumferential anodized coating makes the saw cut particularly low burr. Anodizing: ...

For covering aluminium groove profiles DIFFERENT VERSIONS profile slot: 5, 6, 8, 10 Different profile web Material: plastic PP + TPE, anodised aluminium, plastic NBR, ~ 80 Shore A Material: PP plastic, anodised aluminium, NBR ...

Width: 20 mm - 320 mm
Height: 20 mm - 320 mm

BLOCAN® aluminium profile systems – the assembly system without machining The true calibre of a profile is characterised not by the profile itself but in the connection of the profiles to one another. Our years of application experience ...

Width: 15 mm - 320 mm
Height: 15 mm - 320 mm

The BLOCAN® Structural Profiles– aluminium construction profiles are specifically designed and manufactured in order to enhance the level of consistent flexibility and cost-efficiency offered. The exceptional features offered include ...

Width: 80 mm - 320 mm
Height: 80 mm - 320 mm

The BLOCAN® is a heavy-duty aluminum profile, manufactured by RK Rose+Krieger. This product has 18mm slot width merged with the press mount connector for classic field of mechanical engineering. It can function without the help of ...

Width: 0.2 in - 0.2 in
Height: 0.2 in - 1.9 in

EGL Series edge liners offer a convenient method for covering the sharp edges of large or irregularly shaped holes in sheet metal. The series is pressed into place around the perimeter of the hole. Provides spacers when stacking sheet ...

The AMC-ADIO-Adapter is used as a routing module for har-link® Connector. It features an adapter that is specifically used for a 10-pin female har-link® connector. The device also has a contact Combicon with spring-cage connection FK-MCP ...

Structural profiles are manufactured using a pultrusion process (polymerisation of a profile pulled through a heated die) and may contain up to 70% fibreglass, ensuring high mechanical resistance. GRP (Glass Reinforced Plastic) pultruded ...

Width: 50 mm
Height: 50 mm

For fast and easy erection of frames, benches and racks Aluminium, naturally anodised Produced to DIN EN 12020-2 Easy, very strong under load Top edge particularly suitable as a load-bearing cladding, also takes ...

Width: 50 mm
Height: 16 mm

For fast and easy erection of frames, benches and racks Aluminium, naturally anodised Produced to DIN EN 12020-2 Easy, very strong under load

Width: 100 mm
Height: 16 mm

For fast and easy erection of frames, benches and racks Aluminium, naturally anodised Produced to DIN EN 12020-2 Easy, very strong under load Top edge particularly suitable as a load-bearing cladding, also takes ...

Width: 20 mm
Height: 10 mm

Groove width 5mm Standard length 2000 mm Other lengths available on request

Width: 20 mm
Height: 20 mm

Groove width 5mm Standard length 2000 mm Other lengths available on request

Width: 40 mm
Height: 20 mm

Groove width 5mm Standard length 2000 mm Other lengths available on request

Din Rail Material - : - Hot galvanised Plating - : - Chorome+3 White

Perforated DIN Rail Material - : - Hot galvanised Plating - : - Chorome+3 White

Series D28 construction profiles have a diameter of 28 mm and are compatible with Series 40. They are generally used to create custom workshop and assembly equipment, including light-duty frames, supply trolleys, shelves or extensions ...

Width: 25 mm
Height: 25 mm

Series 25 construction profiles are based on a grid dimension of 25 x 25 mm and multiples of this value. They are generally used for light-duty frames, cabinets, test set-ups, measurement and test units, as well as electronics housings. Choosing ...

Width: 40 mm
Height: 40 mm

Series 40 construction profiles are based on a grid dimension of 40 x 40 mm and multiples of this value. They are generally used for lighter machine frames, guarding, assembly work stations, exhibit construction and work platforms. Choosing ...

MEISER GRP profiles are an innovative alternative to traditional construction materials as steel, aluminium, wood or concrete. With a relatively small selection of GRP profiles a wide range of applications can be realized: e.g. staircases, ...

Product information On the base of our GRP standard profiles the construction of comprehensive structures as catwalks, staircases and platforms is possible. MEISER hereby supplies a full performance beginning with professional planning ...

Width: 480 mm
Height: 30, 50 mm

Characteristics Circular stampings with 5 mm depth, diameter 25 mm, axis 75 mm Material: anodized aluminum shade EN 5754 AlMg3 H22 Profile accepts pedestrian loads of 2000 mm span Color: gold or black Use Contrasted ...

PROFILES The connecting profile provides channelling for power lines for sockets, switches and voice and data. These profiles are built in between the partitions, serving as a support and avoiding false elements. The angular joints ...

Width: 36, 50, 55 mm

Guide made of glass fibre reinforced polyester (FRP / GRP) for concrete ducts dedicated to telecom / power cable lines Ballast retention when the cover is removed for intervention Blocking and alignment of covers on the bases ...

Width: 16 mm
Height: 40 mm

Width: 16 mm
Height: 40 mm

1.01.02.0117 Multipurpose profile for removable aluminum panels for Cava 8 Series 40/45 - Standard finish - Aluminum - Bar length - 6000 mm

Width: 32 mm
Height: 32 mm

1.01.02.0033 Structural aluminum profile Profile 32x32 4 slots Series 45 Slot 8 - Point of inertia - lx cm4 2.25 ly cm4 3.25 - Moment of resistance - wx cm3 2.02 wy cm3 2.02 - Weight - 0.88 Kg / mt - Standard finish - silver anodized - ...

Width: 45 mm
Height: 45 mm

1.01.02.0030 Structural aluminum profile Profile 45x45 Slot 10 Series 45 - Point of inertia - lx cm4 11.33 ly cm4 11.33 - Moment of resistance - wx 5.04 cm3 wy 5.04 cm3 - Weight - 1,56 Kg / mt - Standard finish - silver anodized - ...

35mm DIN rail for installation of terminal blocks, circuit breakers, relays or switches inside enclosures. Available in different models and lengths to fit a wide variety of mounting boss pitch. 1,000mm long FDR-1000 is available ...